Jump to content
SAU Community

Recommended Posts

Hi people

I just brought a R33 GTS

and almost every time i tromp it in 1st i hit the limiter b4 i go to second gear. Also the other day it was raining and i took off hard it span 1st to the limiter just b4 i could change gears.

Im not holding it on the limiter its just hiting it like "pop,pop" and then i change, and i goin to do any damage to my engine or is that what its there for???

Do you guys ever hit the limiter or are you all changing at like 6g???

just need some reasurance i dont wannner blow anything up

thanks

Deano

Link to comment
https://www.sau.com.au/forums/topic/127417-rev-limiter-should-i-use-it/
Share on other sites

i hit mine in second a few times when i first got it, but u quickly get used to changing before redline.

i reckon it's because the rb's dont feel like they're struggling, even at high rpms, so it's easy to over rev.

keep an eye on ur tacho when ur gunning it.

i would hate to buy your car after you have given it as hard a time as you are... i have like to have fun in my car which i have owned for almost 2 years and i think i have only hit the rev limiter maybe 4 or 5 times in that time

Man, some DAYS I hit the limiter 4-5 times.....and thats in an AUTO

My RB's never missed a beat, give it good oil and genuine everything else.

I dont think its a matter of not wanting to buy his car, rather, someone really wanting to buy yours :O

touching the limiter occasionally shouldn't hurt the car. bouncing off it is bad, because your engine's cycling from 0% to 100% power rapidly.

most cars reach their power peak before redline, so you're wasting your time trying to get that last 300rpm out of the motor. my charade was different, torque curve completely flat to the 7500 limiter so I may have hit it a few times during its lifetime :)

I never try to get to the limiter on first - second i ahve hit a few times. These days though, i take it max maybe 5 (eg when im on the fwy ramp) - no point in hurting the car, unless you are a rich punk who can afford to kill off a few skylines :)

agreed... if you can't tell when you're getting close to redline, and you hit redline every time you take off in first, you're obviously too unco-ordinated to be driving a high performance car... no.. wait... make that driving fullstop...

do everyone a favour and either learn how to drive properly, or sell the car and start catching a bus, otherwise we are going to hear about another skyline written off on the news.

c'mon guys ease up a tad. he is just asking if it's bad for the car or not. personally i would suggest it's not a good idea. a non-turbo skyline has seen it's best power wise a long way before the limiter anyway so really not much point. you will get a feel for the revs etc as you get used to driving it so wont hit the limiter so much after a while.

Put it this way, if everytime u drive it in every gear ur hitting the limiter then eventually something will f()ck up. Once or twice here or there wont do nething. Trust me tho after a few weeks u'll be able to change in time. Practice makes perfect

You also shouldnt be driving then :) although an auto should change before it hits the rev limiter anyways shouldnt it ??? As others have said i had mine on a dyno and from memory peak power is like 6400rpm so why take it to the 7,000 rpm or 7,200 whatever it is...

A: my car is not for sale

B: if it was i would by my skyline if i was looking :D

Man, some DAYS I hit the limiter 4-5 times.....and thats in an AUTO

My RB's never missed a beat, give it good oil and genuine everything else.

I dont think its a matter of not wanting to buy his car, rather, someone really wanting to buy yours :(

BeeR Rev Limiter really good cuts ignition as oppossed to your factory rev limiter cutting fuel which can cause damage...they also sound cool and make some nice flames!

sure, as if skyline turbos arn't weak enough...

how does a fuel & ignition cur cause damage, where an ignition cut doesn't? Ignoring the damage to the turbo / exhaust that a misfire system inevitibley causes...

c'mon guys ease up a tad. he is just asking if it's bad for the car or not. personally i would suggest it's not a good idea. a non-turbo skyline has seen it's best power wise a long way before the limiter anyway so really not much point. you will get a feel for the revs etc as you get used to driving it so wont hit the limiter so much after a while.

Why rev it to redline? you go quicker if 1) you have traction and 2) (average)engine power - which probably drops off in the high rpm.

Driving like that will cause damage - if not to your car, then to some one elses.

As long as there is good oil (and the engine is warm), I don't see it causing any immediate engine damage - but it sure causes alot more wear % tear (and not just the engine). Buy some good tyres. better traction, AND you won't want to waste them.

sure, as if skyline turbos arn't weak enough...

how does a fuel & ignition cur cause damage, where an ignition cut doesn't? Ignoring the damage to the turbo / exhaust that a misfire system inevitibley causes...

Why rev it to redline? you go quicker if 1) you have traction and 2) (average)engine power - which probably drops off in the high rpm.

Driving like that will cause damage - if not to your car, then to some one elses.

As long as there is good oil (and the engine is warm), I don't see it causing any immediate engine damage - but it sure causes alot more wear % tear (and not just the engine). Buy some good tyres. better traction, AND you won't want to waste them.

now you really are showing your smarts... I never encouraged driving on the limiter. and if you read my post that you saw fit to quote you would see I suggested that in a non-turbo skyline peak power would occur long before the rev limit (as it does in turbo versions too). i dont think it's very wise to tell me to buy better tyres. what tyres are you using on your car? have you even driven a tuned GTR with 260kw atw? in rwd? in the wet? I can tell you it's pretty angry when it ramps onto boost. or are you just advising me based on your experience in gran turismo? in fact it's hard to believe you were responding to my post at all. when I said:

"personally i would suggest it's not a good idea. a non-turbo skyline has seen it's best power wise a long way before the limiter anyway so really not much point. you will get a feel for the revs etc as you get used to driving it so wont hit the limiter so much after a while."

but thanks for your valuable advice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @joshuaho96 Hmm considering the drama you've seen/experienced, have you looked into getting a built complete long motor shipped from Australia?  Considering the AUD is basically monopoly money when compared to the USD, at a glance this seems like a good option?
    • Bloody Skylines, they put you through the bloody wringer! Stick at it! Stunning drag strip BTW! Where is it? Can see part of the name on the slip and probably should just Google it!
    • I mean the other day I had to walk someone through diagnosing why their timing belt was walking off the cam gears. At least one of the issues was a bent tensioner stud. Local mechanics have found runout on the CAS mechanism causing weird failures. I'm also no saint here I've documented some of the things I've had to learn the hard way. Something I discovered recently is that my CA emissions catalytic converters weren't even welded correctly to align the downpipe to the main cat and they tossed the support bracket that goes from the transfer case to the downpipe to support everything there. I spend a lot of time chasing down these decidedly unsexy problems and the net effect is it feels like I never actually get to the original objective (flex fuel, VCAM, oil control, cooling, etc).
    • At times with how you make everything sound, all I imagine Americans doing when they see a gtr is standing there looking at it and bashing it with a gun like how a caveman would with a club and hoping it fixes itself 
    • I think this is just a product of how the US market works for this stuff. Shops are expensive and there's no real way of knowing what kind of results you're going to get, people don't really have the institutional knowledge. I have heard too much at this point to really put faith in anybody "full service" except maybe DSport and they aren't really a full service kind of shop. If you go to the right place I have no doubt they'll get it right for you. Some locals have set it up right but the cost really is nuts and even now they're still fighting issues. And you know I'm a crazy person who thinks things like twin scroll, relatively short low-mount cast headers, PCV recirc to intake, recirculating BOV, right-sized for ~400 whp, MAF load, validating all of that to a standard comparable to OEM test programs, etc are relevant. For what it's worth, multiple local owners at this point have been stuck in a perpetual cycle of blowing a motor -> getting someone to rebuild it -> some missed detail causes the bearings to wipe and spin just outside of break-in mileage or drop valves or some other catastrophe -> cycle repeats. I usually only find out about this because I'm perpetually helping random friends with diagnosing car troubles, Skyline or otherwise. The single turbo stuff if I'm honest is mostly secondary, it just doesn't seem to achieve the numbers in the ~2000-3000 rpm region that I would expect given the results I've seen here or in Motive's videos. I don't really know what we're missing here in the US to be causing this. Lots of people like to emphasize the necessity of finishing the project first and foremost, but I'm not made of money and I can't afford to be trashing a 15k+ USD engine build with any regularity. Or spending my relatively limited garage time these days unable to triangulate problems because too much was changed all at once. Also, even if it isn't a catastrophic failure I would consider spending the cost of single turbo conversion with nothing to show for it to be pretty bad. 
×
×
  • Create New...