R33 Tail Lights

[R DIRTY 3]

I have an R33 Gts-t Series 2. When i put the lights on only the 2 outer lights light up as tail lights, and when i put my foot on the brake only the 2 inner lights light up. Most that i have seen have all 4 light up for tail lights and brake lights. Is this easy to make happen? Any hints or previous thread information would be great.

Regards

R Dirty 3

[Shayde]

Can fiddle with the wiring, but I'm not going to recommend it

That's only something I'd do on a weekend when I'm bored out of my mind. But I know what I'm doing.

[lukits01]

If im not mistaken originally all 4 lights are on when u turn on your lights

they become brighter if you press the brake pedal

but when the cars come from japan for compliancing, some workshop tend to modify the wiring such that only 2 of the tail lights are on. Not sure how they do it, best just to check if any of the wires behind the boot trim are cut. Mine have all 4 on when u turn on the lights and go brighter as you press the brake pedal

[Kaido_RR]

park lights on -> all four light up

brake on -> all four go brighter

Only the R33 S3 GTR, had the outter 2 lights, light up when you put on the brake...

very easy to check, basicly each light has a earth and a power, just check that all of the wirers are connect

[R DIRTY 3]

well if you know what your doing shayde, when shall i bring it over?? haha you an auto sparky?

Micheal, does that mean i have series 3 GTR tail lights??? must increase the resale price hey?? haha

Regards

R Dirty 3

[R DIRTY 3]

Lukits, the set up you have is what i am chasing. All 4 tail lights top come on, and get brighter with brake.

[trent_tr5]

I have an R33 Gts-t Series 2. When i put the lights on only the 2 outer lights light up as tail lights, and when i put my foot on the brake only the 2 inner lights light up. Most that i have seen have all 4 light up for tail lights and brake lights. Is this easy to make happen? Any hints or previous thread information would be great.

Regards

R Dirty 3

I had the same problem ... it all depends who does the compliance on your car some disconnect it some don't !! I took it to an auto electrician who fixed it for 30 bucks looks alot better...

Cheers

[R DIRTY 3]

Thats what i am planning to do. I am not really all that good at playing "electrician". Last time i tried stuff, it all turned very bad

Regards

R Dirty 3

[NO_RSPECT]

also check the globes... make sure they are dual filament

[R DIRTY 3]

i checked the globes first just to make sure i didnt look like an idiot HA HA HA Could have been very embarrasing

Regards

R Dirty 3

[damono]

I heard people take a certain fuse out so it does this, i guess to be 'different'

Dont see the point myself really...