Jump to content
SAU Community

Recommended Posts

HI all ,

OK i need any info i can get i have a R32 gts-t

it some times just cuts out on accleration and wont do nothing till i back off then it stutters and runs again.

Here is a list of parts ive replaced trying to fix this problem.

AFM

Fuel pump

O2 sensor

TPS

Crank angle sensor

Checked all Coil packs

Igniter.

If anyone has had a similar problem and fixed PLEASE tell me how.

Edited by Vertex32R

It could be your BOV my friend has the same probl;em on his 200 he found out it was the BOV on the dyno ,

no 1 can really say anything unless you tell us what mods u got in da car..

ok list of mods:

Walbro 620hp fuel pump

GTR injectors+coil packs

Rebuild HF turbo running about 12psi (boosted by A little turbosmart bleed valve)

Apexi Air intake

Hybrid GT FMIC

Sparkies are iridium (NGK)

Full HKS Hi-Power Exaust (turbo back)

Hi-flow cat.

Balanced Lightwight pully set.

Lightened Fly wheel.

thats bout all i can think of rite now got some transmission mods but i think they are irelavent.

oh and i dont have BOV at all. (steel plate to block it)

And to add the Crank angel sensor takes 5 min to change it cost me $80 for a spare.

Also for some reason my car idles at about 1200 rpm....and my timings ok so i dont know WTF

it never used to do this and when it was running good i got a good 187rwkw...

so you can understand why im so upset....last dyno run got me a humble 145rwkw and they guys said was my O2 sensor so i changed it but no help....the car now lacks responsiveness and still has the shuting off problem.

any help will be much apriciated

Ta.

Edited by Vertex32R

For the 99 zillionth time, the O2 sensor has no effect on accelleration, or lack of it; it only works on cruise!

Now, what engine management are you running. I notice you are running GT-R injectors and a huge fuel pump, but I can't see anything about an aftermarket ECU.

What spark gap?

For the 99 zillionth time, the O2 sensor has no effect on accelleration, or lack of it; it only works on cruise!

Now, what engine management are you running. I notice you are running GT-R injectors and a huge fuel pump, but I can't see anything about an aftermarket ECU.

What spark gap?

Gap is 0.9 mm

Ecu is stock with a mines sticker sealing it it came like that.

Also got a malpassi Fuel reg tuned on the dyno.

Guest 40th-edition
For the 99 zillionth time, the O2 sensor has no effect on accelleration, or lack of it; it only works on cruise!

Now, what engine management are you running. I notice you are running GT-R injectors and a huge fuel pump, but I can't see anything about an aftermarket ECU.

What spark gap?

The O2 senser cuts out on idle and fast acceleration..

have u tryed fuel filter??

injector pulse??

And when was the last time the injectors were cleaned?

I strongly suspect it's somehow running rich - and rich mixtures don't make power, and might cause flooding on accelleration.

Injectors where serviced when i put them in about 6 months ago.

I dont know WTF it is but its gradualy getting worse.

i think its time for a dyno run ill let you guys know the results so ppl can learn from this but please continue postingn ideas.

  • 1 year later...

I would get the mines ECU retuned to suit Aus octane levels if it was a fresh import, o/wise isnt the impedance of the GTR injectors different to the GTST?

Better yet get a greddy emu

  • 3 weeks later...

getting same prob too guys. mine stalls on idle and throttle cuts off sumtimes and then it jerks like crazy. usually to avoid the problem i kick the clutch and rev it hard. todat throtle jus died for like 2 mins. pretty dangerous.

car: 1990 r32 gts-t type m

stock standard motor running invidia cat back zorst 3"

stock boost 10psi

stock cooler and airbox too

my mechanic tetsed the injectors and fulr no prob there and throttle body is fine. NEED HELP pls cheers

  • 2 weeks later...

mine's having the same problems too... everything's fine until 3000RPM - 4000RPM, then after that, it's fine again..

It backfires and stutters until i take my foot of the throttle.

(Standard RB25DET)

mine stalls on idle and throttle cuts off sumtimes and then it jerks like crazy.

I reckon might be two different problems there.

If the boost builds and builds and then suddenly cuts off altogether with an almighty jerk of the chassis. Normally this is a pretty classic overboosting symptom. The ECU then goes shit, if this keeps going it's gonna blow the head gasket and shuts it off I believe.

Wow I can't believe you're still driving it when it's doing this man lol, I overboosted mine at first, above happened and it's (as I'm sure you've experienced) such a huge, strange and absolutely wrong feeling thing to happen in the car for it to cut boost and jerk like that, alarm bells were going off in my head straight away when it happened to me lol.

But you're not overboosting soo.....I dunno? ECU thinks you are for some reason - something dodgy, vaccuum lines all in tact?

Dunno, I'm FAR from an expert - you should ask one asap dude, cos cutting the boost suddenly like that is ECU's last resort "you're gonna blow it" tactic.

For most of the other problems listed above - misfires etc, I'd get the coils checked. If it's not the injectors it's probably a blorked coil I think?

I dunno, I just pick up stuff I see and hear around the traps, one of you expert guys come explain :nyaanyaa:

PS Phiboy if your mechanic doesn't know the cut-off is usually associated with overboosting, he's either the worst mechanic ever or he's never even looked at a turbocharger. Either way, I'd be switching. Dunno where you live but if you live in brissie I can put you onto a competent and thorough but not "boutique tuner price" mechanic, he doesn't claim to know everything about skylines but he has rebuilt his own 11 second, concourse winning car from the ground up - so you know he does it cos he loooooooooves cars.

And he's my uncle :w00t:

Edited by silversr33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My take on gg2 48mm, 54mm, 58mm, and 62mm compressor map for same size compressor vs gg1 : All gg2 only outflow gg1 above 20 psi. As all g gen 2 surge line at lower left of comp map move to the right, all gg2 sacrifice spool vs same size gg1, surge line move to the right worst for 54mm gg2. So for same size compressor if you want best response, use gg1, if you want max hp at >20psi use gg2 but you will be laggier vs same size gg1. Max compressor efficiency drops to max 75% on all gg2 vs max 76%-80% of same size gg1. Iirc lower efficiency means hotter iat less dense air so lower hp at same operating point of comp map. Also curious why gg2 is mapped to lower max rpm vs same size gg1 (only 48mm size both gg1 gg2 mapped to same rpm) : 54mm gg1 165,000 rpm  vs  gg2 160,000 rpm. 58mm gg1 150,000 rpm vs gg2 140,000rpm. 62mm gg1 145,000 rpm vs gg2 140,000 rpm. If gg2 can safely spin to gg1 rpm then they can flow a bit more than as mapped. Good thing that all gg 2 interchange compressor and turbine housings with same size gg 1. So gg1 owners can buy gg2 chra only if planning to boost >20psi.
    • My stuff is all with Shannon's, granted, I don't really have imports I'm driving on the road, however, I've had multiple cars at the same time with them. Presently we have the Landcruiser on laid up cover, Sarah's Kluger on full cover, and the house insured. About 18 months ago Sarah wrote her Subaru Liberty GTB off, insured with Shannon's, and the payout, and buy back of the wreck was super quick. In 2020 we had the VF Commodore totalled in a major hailstorm. Storm was on the Saturday, I called on the Sunday and lodged it, vehicle was towed on Tuesday night, assessment team called on Wednesday to say it was a total loss and get payout details, money was in the bank on Thursday morning. Have had a few other claims both at fault, and not at fault, over the years, and never had an issue with them.   Funnily enough, they're also the cheapest insurer I find for things like Sarah's Kluger.   I will say I'm less impressed dealing with them lately around "the experience", as a lot of their staff that you deal with aren't car enthusiasts. Shannon's has a much more main stream feel ever since they decided to become "big corporate", laid a heap of staff off, and then hired a bunch of non enthusiasts. At the same time they've been making a push to be less "call us and we'll personally have someone who cares help" to "hey, this computer can do stuff for you" and are trying to get more square pegs to fit round holes. (That's just the vibe I get from them). Again, have had no issues with claims with them, but get a bit of a "less personal" feel from them.
    • A thing I wasn’t happy with with enthusiast was during the initial phone call they told me they’d insure it for 130k but needed photos.   I then sent them photos and they told me $80k as there were other cars either similar modifications available for around that price, I told them to send me the links to said cars so that I can buy them. i then sent the modification list with prices of the parts (no labor) and the price then came to 115k, which is still shy of the 130 that was agreed in the initial phone call 
    • Ask me a bit later this week before payday
    • I agree that delayed payment probably isn't the most suitable solution. It seems a solid complete transaction would be best. As I wouldn't be using this sale as a line of credit that would typically earn interest, we can probably arrange a much cleaner single transaction deal. I can do $92.52 today. Would you prefer EFT, or Cash on Pickup?  😛
×
×
  • Create New...