Jump to content
SAU Community

Recommended Posts

For sale: 1993 FD S6 RX7

Asking Price: $8000 no offers, serious enquires only please.

Killometer's: 97,000kms

Manual or Automatic transmission: Manual

Engine Type: 13B twin turbo

Modifications: ORC Slotted brakes, Blitz Turbo Timer, ORC clutch, Exhaust, Mazda speed steering wheel, Razo shift knob, etc

Complianced: No, imported under race rally rule.

Registration: NO, cannot be registered ever, please dont ask. Handles awesome, would make the perfect drifter!

Other Comment's about the vehicle:

Engine is excellent, has great solid power and compression or any other test is welcome.

Wheel spins when turbo kicks in all the way to 8000rmp with 255 tyres :rofl:

Will be sold with different set of 17in wheels or these works available for extra.

Contact detail's: please call me on 0412500318 or sms me if you cant get through and ill call you back.

Iam in Adelaide near henley beach area, can organise interstate transport via TNT if interested.

Priced for very quick sale at $8000 cash, if not sold here by next tuesday i will advertise on tradingpost.

post-14115-1153811783.jpg

post-14115-1153811828.jpg

Edited by popeye132
Link to comment
https://www.sau.com.au/forums/topic/127528-fs-1993-fd-s6-rx7-8000-no-offers/
Share on other sites

Damn thats cheap for a car allready in the country.

Looks hot to, like the kit.

Wish i could add another car to the garage with out getting divorced.

I love the car mate just out of interest why dont the rules allow for these to be registered? Is it pollution... such a shame to see a beautiful car like good for nothing but thrashing around a race track :(

i brought a 94fd3s for $5500 a few years ago imported for race/rally.

i wrecked mine out and made well over $10,000

there are ways u can register it, but u need to know the loop holes and u also need to live in adelaide.

$8000 is still very cheap as this S6 looks to be a hamberger with the lot.

i brought a 94fd3s for $5500 a few years ago imported for race/rally.

i wrecked mine out and made well over $10,000

there are ways u can register it, but u need to know the loop holes and u also need to live in adelaide.

$8000 is still very cheap as this S6 looks to be a hamberger with the lot.

Loop holes? if its a legal loop hole id like to know how;)

The only 94 models i saw for under $6000 landed are stock ones with engines in need of rebuild

im pretty sure you can get them registered legally, but its alot of f*cking around, and cost wise i dont know if it will be much cheaper than buying one and importing it under the normal rules.

Edited by VB-

If the information i have is correct the reason you cant register it is because these cars were sold here from factory, unless it was some special version that is a lot different from what was sold here then it cant be registered, the only way to register it is to change the id to a later model fd.

But im guessing there is some way around it as a mate of mine has an imported S6 that some one was able to register at some time.

couldn't u just transfer everything into a shell of another s6?

To do that you would have to use a australian delivered S6, there are not a whole heap of them getting around and no doubt the ones that are out there are well sort after for that exact reason, spend $5000 on a shell, $10,000 on a race only import, put in a bit of work and you have doubled your money.

http://www.carpoint.com.au/car-review/ce6790.aspx

As stated in that article there were only a couple of hundred S6's imported, most about 10 or so years ago, racing and owners with too much ego and not enough talent has taken its toll.

7g is a bargain, engine, gearbox and diff would get you 5g or more of that back if you wrecked it, or keep the engine and gearbox for a project and you would pretty much make your money back on everything else, if you have time and space this is a great buy.

i have an aus spec series 6 that i have taken a small crash to the rear quarter. if i was to part it out the going rate on the shell and vin number would be alot more then $5,000

also rotory engines are hard to sell cause they go "pop" very easily

AS for this series 6 i suggest someone grab there cams licens buy this car and go nutz.....FD's are the bomb on the track

i have an aus spec series 6 that i have taken a small crash to the rear quarter. if i was to part it out the going rate on the shell and vin number would be alot more then $5,000

So your tellin me that once you have taken everything of value off the car and only had the shell with tags left on it, no diff, suspension, steering, hanging panels, glass or anything else you would want a lot more than 5g for it......... i hope you like holding onto things for a long time, or maybe your just saying this because you have made an offer.....

popeye132 if you havnt already put it on Ausrotary much better chance of selling than on a skyline forum.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
    • The only high-power RB I've personally seen go pop after running for all of an hour on a dyno was built by B2R, while being remotely tuned by B2R. The only wastegates I've ever had leak like a sieve, return, still leak, return and get shipped back the wrong ones were from Turbosmart. The only final drive that I've ever purchased that were unusable, twice... were from Speedtek. The only seat mounts that I've ever purchased that placed the seats in the door frame were from Crank Motorsport. The only poorly designed parts that I had the manufacturer confirm should have been designed as per what I mentioned were from GKTech. The only ECU I've had firmware updates consistently break things are Haltech. The only catch can I've purchased that didn't fit in its advertised spot was from ATP. So forth and so on... Moral of the story, doesn't matter where it's from. Do your research beforehand and stick with products and companies you've trusted in the past.    @joshuaho96 If you want it done right, do it yourself.
    • Something coarse-ish. 180 is good.
    • I was surprised to see all the quick Jack models at the same prices on there. But yeah, grabbing one at 20% off would be great.
×
×
  • Create New...