Jump to content
SAU Community

Recommended Posts

Hi All,

I am looking for the name and place to buy this product, can any one help please.

I am looking for a product which i purchased in Auz before, but can't remember where, its to use on the plastic headlights of a skyline etc,

It takes away the dullness and discolouration of age. and sort of makes them clearer.

Can any one help me??

Many Thanks

POOMA

Link to comment
https://www.sau.com.au/forums/topic/127560-headlight-cream-help/
Share on other sites

www.nismo.com.au

ie. Unique Autosports have it.

I think JustJap have it...

OR, if you want you can call up your closest Honda dealer and ask for Honda Plastic Cleaner that is used to clean the plastic windshields on their motorbikes. That stuff is also the same.

Do these products cause any hazing of the plastic?

I purchased a small television with a clear plastic screen cover, but when i got it home, i found that there had been something dripped onto the clear plastic cover, and it has left some small 'scars' on the plastic.

I've been contemplating using something like this to see if it will fix it.

Edit:

Ok just cleaned my car, and mum told me to use ajax-spray and wipe and the right headlight now looks a lot cleaner than usual..

Still not 100% clear like my other one.. But it got rid of some yellow stuff atleast..

Hope it doesnt damage the plastic over time..

I've been using Maguires Plastic X for about 2 years now and haven't noticed any permanent damage to my headlights so far. I've also used it on the plastic that encloses the speedo + tacho in the dash and it's come up so clear I can't see the plastic anymore. It doesn't fix discolouration/cloudiness for good though, you need to regularly apply it (if it did fix plastic for good, you wouldn't need to buy more! :pirate: )

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes there is a front and back insertion point on each side, each point is tubed with supports into the car and tied to the cage/ floor mount point
    • Is the jack stand system tied into the cage somehow? Upgrades look goooood 😍
    • Big updates, tons of work and $$$ 
    • it takes so long to get things done but ... they are nearly there and we hitting the track soon again  So - at Perth Festival of Speed the car unfortunately had a decent off, wasnt me driving, wasnt the person drivings fault. Long story short car got sent very fast towards the wall without the control on throttle from the driver input and a disaster was averted but there was damage that needed to be fixed - carbon busted and alot of bent bits The splitter got munched and had to go back to get fixed - took a bit to get it there, fixed and back but got a surprise package when a new double element higher DF splitter came back - nice surprise !  and first person to have one     At a car show I took the car too some punks stole one of my carbon indicator blanks and stomped on the other so had to get a new set of headlight / indicator combo from tops stage so got front fender vents as well to put in the order     While all this was happening the new MCA golds turned up and did some fiddling around with those   Put in the flappy paddle system and clutch lockout wiring/ system   We have also put shorter gearing in top top it out at 300 kmph in 6th gear  where previously I held 5th to 282 at SMP and 277 in Perth   Looking for better control and faster acceleration     I wasnt intending on doing pedal box I was managing with the brake master replacement system I had going on and adjusted std pedals but on applying the clutch switch to the old system we found the *insert technical word here * bar that goes from the pedal to the master was bent about 40 deg and about to snap = lucky find otherwise be a bad bad time - discussion was had about getting a custom bar built to withstand the load but in reality it was time      making any suspension, wheel or anything adjustments to date has been a nightmare - aero off, adjust, check and repeat - time consuming and hard - short of going full airjack system we fashioned some external manual car lifts this will make life a million times easier     All the bent framing, some intercooler pipes and other has been fixed and replaced and after 6 months I finally have the car back at home in my control so its get to work on it, set ride heights, wheel align and will start track testing again soon   So ultimately other than a few flashy bits nothing actually looks likes its been done but in reality alot has. Typical   We'll see how all this goes        
×
×
  • Create New...