Jump to content
SAU Community

Recommended Posts

Item: Caliber CA2000D Plus - 1250 watt RMS Class D Monoblock

Location: Adelaide

Item Condition: Excellent, hardly used, scratch running across some of the fins down one side of the amp - you can only notice this when looking at a certian angle to catch a certain light - the camera did not pic this scratch up.

Comes in original box with packaging, manual, remote bass controller, cable and Caliber sticker.

Reason for selling: Not used for the previous ~12 months.

Price and price conditions: $420 including postage within Australia ($400 pickup)

Extra Info:

- 1250 watts rms @ 1 ohm

- 750 watts rms @ 2 ohm

- 400 watts rms @ 4 ohm

- built in phase switch

- variable low pass filter (30hz - 250hz)

- subsonic filter

- remote control for fine adjustment of subwoofer from drivers seat

- protected against overheat, overload, short circuit and DC offset.

- Strappable/stackable (with a second identicle unit)

Pictures:

http://home.iprimus.com.au/pcarter/IMG_7233small.jpg

http://home.iprimus.com.au/pcarter/IMG_7234small.jpg

--------------------------------------------------------------------------

Item: Alpine 7998r

Location: Adelaide

Website: http://www.alpine.com.au/products/product4...rch=1&id=52

Item Condition: Excellent condition!

Reason for selling: no longer used

Price and price conditions: $700 (RRP was $1799!!)

Extra Info: Comes with everything as bought when new, including box, manual, remote, wiring. Brilliant Headunit!

Pictures: http://home.iprimus.com.au/pcarter/IMG_5860small.jpg

--------------------------------------------------------------------------

Item: 17x7 inch Starcorp Vella Rims

Location: Adelaide

Item Condition: Good condition, 2 tyres like new, 2 tyres will need replacing. Generally these rims are in excellent condition, minimal scratches all of which can only be seen if looked at closley.

Reason for selling: was stupid enough to buy on impulse - not needed

Price and price conditions: $650 firm as i paid 2 days ago! :happy:

Extra Info: PCD 4x100 and 4x114.3 offset is 40. Nankang 205/40/17 Tyres.

Willing to swap for 15's or 16's or light weight 17's pending inspection and cash adjustment if nessesary.

Pictures: http://www2.pulsar.org.au/photos/members/4613_01.jpg

not for a skyline but might look good on someones daily :)

--------------------------------------------------------------------------

Item: Tamiya Madcap 1/10th scale Electric RC car (oldschool buggy style)

Location: Adelaide

Item Condition: Needs repair

Reason for selling: no longer used

Price and price conditions: $150 Negotiable

Extra Info: Needs a few new parts, spur gears, speed controller, wheel bearings, tyres. Comes with lots of spare parts, upgraded oil filled shocks, remote controller, 2x batteries (probably dead) main power charger and car charger.

Pictures: upon request

Contact me: [email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What are your plans for your blow off valves? Purely plumb back? How soft will the spring in them be? AFM can be tricky to get super smooth and nice, especially depending on the rest of the system, and then can be very easily upset if something slightly changes. IE, even if you run recirc blow off valves, you could still see issues getting it to behave at certain load points as turbos might start to spool, but you release the throttle but it's not enough pressure to crack the bov open to recirc, and you can end up with reversion which can cause double metering, and hence dumping of fuel into the system, and stalling the engine.   If you're going to run a map sensor for closed loop boost control from the ECU, what makes you want to keep the AFM?    
    • It's not bad, it's just not flexible. And say if you have any leaks between the MAF and plenum, well then your load axis goes out the window. Here's a real world scenario, I blew off an intercooler hose last track day, as the clamp decided to Bluetooth itself somewhere. Still continued to do 2 laps and drive it to the pub for a couple of beers then home. Good luck doing that with a MAF setup 
    • Is MAF load really that bad? I'm not trying to do big power, my only real desire is VCAM and flex fuel support so I'm not terrified of blowing my engine apart from CA's appalling 95 RON "premium" fuel. Stuff like playing with closed loop boost control and really dialing in my transient fueling and ignition are frankly just to prove to myself I remembered something from uni.
    • Thats what ive been doing. Ive got a million questions but i know theyve probably all been answered before at some stage. Todays research included nismo heritage seat covers, s3 projector headlight retrofits and how to remove/paint the rocker covers 
×
×
  • Create New...