Jump to content
SAU Community

Recommended Posts

i have an R34 and i am wanting to convert it to turbo. can anyone help me on where would be a good place to go for the conversion or if anyone is wanting to sell their engine or can is able to help me in any way!

cheers

go see shaun at boostworx or brett at graham west (APE)

I'd consider whacking a turbo on your na motor and run low boost, the response would be great and bein an r34 i'm presuming the motor has reasonably low k's so should be in pretty good nick. As long as the person tuning knows there stuff that is!

A few guys are turbo'ing RB25DE's these days. Most of them though seem to be swaps for RB20 powered cars though - Cefiro/R32

At a minimum, I'd say you'd be up for a thicker head gasket to drop compression to a boost freindly level, turbo and turbo exhaust manifold (not sure if the RB25DET manifold bolts up, I think it does, considering everyone uses the RB25DE head for RB30DET buildups) and some bigger fuel injectors, plus intercooler and pipework.

There's a probably $4000 odd here

Add to that a programmable ECU, upgraded turbo brakes, LSD (if yours doesn't have one already)

There's another $3000 odd

Is yours Auto? If so I think some guys are running PowerFc's in there Auto R33's, there would be a thread going if its been done before somewhere.

If its Auto, then there is another $2000 to swap it to manual, or say at least $1000 getting the auto beefed up

Then there are the legal issues, ie Regency Inspection due to the turbo installation...........

So at a lazy guess, there is almost 10k worth of rooting about to do it properly.

You could probably sell your car and buy a turbo R34 for cheaper, and it comes with all the good gear to start with

But, if you want to head down this way, have a chat to Shaun at Boostworx and see what he reckons is the best way to go about it, I am sure he would be o some help

Hope this points you in the right direction,

Chris

A few guys are turbo'ing RB25DE's these days. Most of them though seem to be swaps for RB20 powered cars though - Cefiro/R32

At a minimum, I'd say you'd be up for a thicker head gasket to drop compression to a boost freindly level, turbo and turbo exhaust manifold (not sure if the RB25DET manifold bolts up, I think it does, considering everyone uses the RB25DE head for RB30DET buildups) and some bigger fuel injectors, plus intercooler and pipework.

There's a probably $4000 odd here

Add to that a programmable ECU, upgraded turbo brakes, LSD (if yours doesn't have one already)

There's another $3000 odd

Is yours Auto? If so I think some guys are running PowerFc's in there Auto R33's, there would be a thread going if its been done before somewhere.

If its Auto, then there is another $2000 to swap it to manual, or say at least $1000 getting the auto beefed up

Then there are the legal issues, ie Regency Inspection due to the turbo installation...........

So at a lazy guess, there is almost 10k worth of rooting about to do it properly.

You could probably sell your car and buy a turbo R34 for cheaper, and it comes with all the good gear to start with

But, if you want to head down this way, have a chat to Shaun at Boostworx and see what he reckons is the best way to go about it, I am sure he would be o some help

Hope this points you in the right direction,

Chris

I AGREE

for R32, 33, turbocharged N/A engine might not be a good idea, but for the price different of R34 GTT/GT(easy 10k+), i believe it's still something worth the hassle IF u willing

by using 2 hand stock GTT parts, u should able to bring the cost down to 5k or less

Edited by Maxx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • me too wasnt real happy and cost me a penny or 2 to replace
    • But there's the archetype for the name plate! Here's my view on that stupid TÜV ruleset. Buy a brand name aftermarket piece of equipment. In this case, the Mines front pipe we're talking about. Get it TÜV certified on the car. Damage the underside of it, say on a speed bump. Cut out the damaged section, replace with fresh metal. (For the sake of the argument only), continue doing that to the whole pipe until it is all gone, replaced with new metal. Is this grandfather's axe still the same front pipe? The design hasn't changed (much). The pipe walls are in the same places. The flanges are in the same places. It is functionally identical. How does this differ from a pipe that is ever so slightly different in fabrication (ie the number of welds in it, a few mm here and there in terms of where the pipes run, are joined, etc)? Anyone with 0.5% of a brain can see that there is absolutely no way that the performance (power, environmental aspects, noise, etc etc) of it can be any different than the genuine Mines pipe. Maybe even Mines made 2 versions of this design, with the same differences. How would anyone (say a TÜV inspector) ever be able to differentiate between them? And yet, they are so bloody anally retentive about this stuff. Mad. How upset would they be if you had the wrong spring washers on the flanges?
    • Sakura (cherry blossom) tree at the end of a path going through Kabutoyama Park in Nishinomiya, Japan. Taken with Sharp Aquos R8
    • After a fairly extensive search using Japanese terms and checking Minkara etc, I couldn't find anything even close to your front pipe in the photos. I'm no expert but the two pipes merge really close to the flange connected to the catalytic converter which is rather unique from what I've seen, which makes me think it's more than likely a custom front pipe. The welds and 'more pipe sections than usual for a brand name pipe' makes it seem like a custom one.  Here's some photos of an old Mine's front pipe. You can see that it's just 4 pipe sections as opposed to 6, and arguably looks more like a 'production' front pipe:
    • Wtb r33 low side s2 ac line 
×
×
  • Create New...