Jump to content
SAU Community

Recommended Posts

Hi Guys,

Ive got a HKS T04E Turbo kit that im looking to sell.

They are all genuine HKS items. Not ebay knock offs.

The kit is to suit an RB25 or RB20.

The turbo is rated at 500hp and has just been rebuilt in Japan. Has not been installed on a car since rebuild. (i don't know too much about turbos so i may not have all the answers to your questions)

A.R - .56

Items included in Kit:

- HKS Cast-iron mid-mount manifold

- 45mm HKS wastegate

- 3" Dump pipe to Cat

- All oil line supplied

- Crossover pipe with BOV.

- Turbo elbow etc

Basically this is all you would need to bolt this turbo up to your car. Only thing you need to buy is some gaskets.

Asking Price: $1600 ONO

I am located in Sydney and would prefer pick up but intersate buyers welcome also.

Reason For sale: Only bought it for the sake of buying it (at a good price of course :D) and now i need the cash for a new clutch and 100k service :(

KIT HAS BEEN SOLD!

post-17623-1154001637.jpgpost-17623-1154001420.jpgpost-17623-1154001400.jpgpost-17623-1154001650.jpgpost-17623-1154001663.jpgpost-6973-1127038743.jpgpost-17623-1154001693.jpgpost-17623-1154001693.jpg[attachmen

=48664:attachment]post-17623-1154001741.jpgpost-17623-1154001753.jpg[att

chment=48667:attachment]

post-17623-1154001682.jpg

post-17623-1154001717.jpg

post-17623-1154001765.jpg

Edited by Stel

what A/R is the turbine housing,is it split pulse(pic if possible)?

Hi Guys,

Ive got a HKS T04E Turbo kit that im looking to sell.

They are all genuine HKS items. Not ebay knock offs.

The kit is to suit an RB25 or RB20.

The turbo is rated at 500hp and has just been rebuilt in Japan. Has not been installed on a car since rebuild. (i don't know too much about turbos so i may not have all the answers to your questions)

A.R - .56

Items included in Kit:

- HKS Cast-iron mid-mount manifold

- 45mm HKS wastegate

- 3" Dump pipe to Cat

- All oil line supplied

- Crossover pipe with BOV.

- Turbo elbow etc

Basically this is all you would need to bolt this turbo up to your car. Only thing you need to buy is some gaskets.

Asking Price: $1600 ONO

I am located in Sydney and wo

uld prefer pick up but intersate buyers welcome also.

Reason For sale: Only bought it for the sake of buying it (at a good price of course :whistling:) and now i need the cash for a new clutch and 100k service >_<

post-17623-1154001637.jpgpost-17623-1154001420.jpgpost-17623-1154001400.jpgpost-17623-1154001650.jpgpost-17623-1154001663.jpgpost-6973-1127038743.jpgpost-17623-1154001693.jpgpost-17623-1154001693.jpg[attachmen

=48664:attachment]post-17623-1154001741.jpgpost-17623-1154001753.jpg[att

chment=48667:attachment]

If you like to sell the wastegate only send me an e-mail and also tell me how much you are asking for.

Cheers,

EUGEN

PS Do you have any clue the spring in the wastegate for what pressure is?

If you like to sell the wastegate only send me an e-mail and also tell me how much you are asking for.

Cheers,

EUGEN

PS Do you have any clue the spring in the wastegate for what pressure is?

Sorry mate, not willing to separate as yet. Will let you know though.

Thanks

Stel

1k

Sorry mate too low.

The HKS TO4E's should have HKS stamped on the exhaust housing, when I say stamped they are actually raised letters on the rear of the exhaust housing.

I was told that it was a HKS turbo. I don't think the old ones had HKS imprinted on them. Either way, Garrett make HKS turbos.

Sorry, but that aint a HKS turbo. Well not a genuine Kansai made one anyways. Ive had a T04E a few years back, and it didnt look like that. Sorry, but your details must be accurate according to what you are actually selling. Still looks like a good price for what you are selling.

Sorry, but that aint a HKS turbo. Well not a genuine Kansai made one anyways. Ive had a T04E a few years back, and it didnt look like that. Sorry, but your details must be accurate according to what you are actually selling. Still looks like a good price for what you are selling.

When i got it i was told it was a genuine HKS so i assumed it is genuine.

The HKS TO4E's should have HKS stamped on the exhaust housing, when I say stamped they are actually raised letters on the rear of the exhaust housing.

I was told that it was a HKS turbo. I don't think the old ones had HKS imprinted on them. Either way, Garrett make HKS turbos.

im not tryna ruin your sale but i think it should be accurate, although hks buy their turbos from garret they put a shit load of research/money and mods into them. thats why there worth a bucket. so i dont think its right to say its hks just because garret make hks one. or it may be a older one. i dunnp thats just my opinion, eitherway good price, gl

its an old kit dude, ive seen quite a few of these olds HKS T04e kits now, even my own, and none have had HKS stamped on them.

Great upgrades, near on a perfect kit, awesome manifold design too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...