Jump to content
SAU Community

Nissan Gtr Skyline R32/r33/34 Running Gear

CRACKD
 Share

Recommended Posts

CRACKD Contributor

CRACKD

Posted
Posted (edited)

Complete Running Gear to suit R32/33/34 GTR

This running gear was to be used in my street/strip R32 GTR but as this will no longer be happening the entire setup is for sale. The aim of this setup was to run a 9sec 1/4mile on slicks in a full street trim car.

  1. Nissan RB26 Long Engine with RB30 Bottom End $11,000 - This engine has been rebuilt with forged internals aswell as been modified to hold 600rwkw, it has also been adapted to suit the 4WD sump, engine hasn't been used since being built. Inspection welcome.
  2. OS Giken 5 Speed Cross Mission Gear Set $5500ono - This is a R33 GTR gearbox rebuilt using a new OS Giken gear set, synchros and bearings.
  3. 3540 High Mount Twin Turbo Setup $6000ono - This is a used and recently inspected turbo setup, it comes complete with turbos, manifolds, wastegates, dump pipes, front pipe, intercooler piping, oil and water lines. Good condition.
  4. Hi-Octane RB26 Sump $1800ono - This is a brand new sump un-used since being modified and has also had the diff rebuilt with all new seals etc. Picture's speak for themselves.
  5. Trust 4" Drag Twin Entry Intercooler $1200ono - This is a used intercooler but is in good working order and has been pressure tested and was given the all clear.
  6. Fuel System $1700ono SOLD-AWAITING PAYMENT - This consists of Sard 800cc Injectors, Sard Fuel Regulator and Trust Billet Fuel Rail all parts are brand new and never used. WILL NOT SEPERATE
  7. Ignition System $1100ono - This consists of SplitFire Coils and HKS DLI Type 2 Ignition module, the coils have done 5000kms and the HKS DLI is brand new. WILL NOT SEPERATE
  8. Aluminium Radiator $700ono - This is a Ron Davis radiator it has been used for 5000kms and has been pressure tested and was given the all clear.
  9. RB26 Inlet Side of Engine $1000ono - This is the standard inlet side of an RB26 consisting of plenum, throttle bodies and injector block and fuel rail the entire assembly has been cleaned with the plenum, injector block and fuel rail being chromed as shown. The throttle bodies have also been rebuilt with new bushes etc. WILL NOT SEPERATE
  10. RB26 Rocker Cover Set $650ono - This is a standard RB26 rocker cover set that has been painted also comes with a Trust clear timming cover. WILL NOT SEPERATE
  11. Exedy Twin Plate Clutch and Flywheel $1000ono - This is a used twin plate clutch with 5000kms on it there is still plenty of meat left on the pads, the flywheel has been machined and ready for use. This is a pull type clutch.
  12. Surge Tank $250ono - This is a brand new unsused 1.5lt surge tank with base and fuel pump clamp.
  13. Trust Greedy Oil Catch Can $200ono- This is a brand new unused catch can comes with eveyrything need to connect it up.

If anyone is interested in buying the entire setup please call me to discuss.

Location: Sydney.

Payment: Cash on pickup.

Shipping: Not offered pickup only or willing to drop off to local buyer.

CRACKD

Sam 0419818795 - If i dont answer please send an SMS or a PM

Picutures will be uploaded soon.

Edited by CRACKD
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • robbo_rb180
      Neil's R33 Gts-t Build

      By robbo_rb180 · Posted

      AFM looks to be a z32 The injectors maybe old Nismo 555cc The turbo tag when looked up seems to be a gt2871 , imagine it would have the bigger rear housing .82 all look like the mid 00's mods when he started building it up. Vac hose seems right but would need to see a diagram. Great work going up there and sorting it out, be a good club car for someone wanting a good reliable rig.  I know I would like to have it but no space and too many other race cars at the moment.
    • Kyer32
      R32 gtst speedo out by 10kph

      By Kyer32 · Posted

      Heys guys I got a r32 gtst speedo is out by 10kph seems the faster I go the more it be out  just seeing if anyone else had to problem and knows how to fix it 
    • Duncan
      R32 GTR EV? The leaf of the Godzilla's!

      By Duncan · Posted

      I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
×
×
  • Create New...