Jump to content
SAU Community

Recommended Posts

G'day all

I would like to say thank you and best wishes to you all, I have been around fourm for while now, and this is pretty good place to start out if you have questoins about skylines.

I will be flying out to south korea this Sunday, to serve my mandatory millitary service for next 3 years.

I would like to thank all the current and old SAUWA members and staff, especially Dan the man and Sneeza. you guys are doing great job to make every members happy, and that is not easy task. but you guys are doing well.

I thank you all and will see you all when I come back, hopefully by then R35 GTR is affordable :D

cheers

Joe

post-127-1154124203.jpg

Link to comment
https://www.sau.com.au/forums/topic/127998-pva_glue-is-going-back-home/
Share on other sites

G'day all

I would like to say thank you and best wishes to you all, I have been around fourm for while now, and this is pretty good place to start out if you have questoins about skylines.

I will be flying out to south korea this Sunday, to serve my mandatory millitary service for next 3 years.

I would like to thank all the current and old SAUWA members and staff, especially Dan the man and Sneeza. you guys are doing great job to make every members happy, and that is not easy task. but you guys are doing well.

I thank you all and will see you all when I come back, hopefully by then R35 GTR is affordable :D

cheers

Joe

Bye Joe,

Keep Safe

Paul

G'day all

I would like to say thank you and best wishes to you all, I have been around fourm for while now, and this is pretty good place to start out if you have questoins about skylines.

I will be flying out to south korea this Sunday, to serve my mandatory millitary service for next 3 years.

I would like to thank all the current and old SAUWA members and staff, especially Dan the man and Sneeza. you guys are doing great job to make every members happy, and that is not easy task. but you guys are doing well.

I thank you all and will see you all when I come back, hopefully by then R35 GTR is affordable :(

cheers

Joe

Hope the next 3 years fly past Joe!

Look forward to seeing you back in Perth driving a R35 GTR!! :D

Thanks for the sales you have forwarded onto my shop I wont forget!

- Adam

Hi Joe,

I didn't realized you're Korean ? With the current climate I think I'll choose to be a coward than do compulsory military service :D. Send back some photos while you're over there ..

Anyway, take care and keep safe. See you in 3 years time.

Richard.

G'day all

I would like to say thank you and best wishes to you all, I have been around fourm for while now, and this is pretty good place to start out if you have questoins about skylines.

I will be flying out to south korea this Sunday, to serve my mandatory millitary service for next 3 years.

I would like to thank all the current and old SAUWA members and staff, especially Dan the man and Sneeza. you guys are doing great job to make every members happy, and that is not easy task. but you guys are doing well.

I thank you all and will see you all when I come back, hopefully by then R35 GTR is affordable :(

cheers

Joe

Pea Grabel, no but we have land mines :D

I still have nasty scar from that :nyaanyaa: thank you both and everyone.

I will be back in 3 years, I will still keep in touch and take heaps of photos also I might travel to Japan (only 1 hour flight out of Seoul).

so If anyone planning to go japan, you should drop into korea and look me up.

I can be contacted @ [email protected]

I will make own bloggs on here so you guys dont miss me too much.

really I thank you all for Great time in SAUWA and all the best to you all.

I am flying out sunday night/monday morning ;)

cheers

Joe

post-127-1154214563.gif

Try and keep in touch Joe. When you are not fighting off the red from over the border. Hmm reminds me of "Tae Guk Gi" :pirate:

Too bad i didnt make it on Sat i ended up getting caught up in some family drama much to my distress.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...