Jump to content
SAU Community

Recommended Posts

FOR SALE ‘84’ 323i MANUAL Long Rego Late may 2007

Located: EASTWOOD SYDNEY

its a 6cyl 2.3

221xxx kms

Runs Well Mechanically A1..

Recent FULL Service. have receipt work done less than 200 kms ago

Manual SUNROOF.

POWER WINDOWS

Immobiliser

GREAT FIRST CAR

the only non original bm part in it is the cd player.. everything remained stock.. it hasnt been thrashed either.

Does not need any mechanical/running repairs whatsoever!

needs some cosmetic tlc.. interior is wearin old in the front. back leather still good. Carpets good, roof lining good.. tear in drivers seat.

Paint is on the lower end of the scale... Had it resprayed in 2002... but didnt wash it often enough and left it outside!

has cd player but works when it wants to.. was installed incorrectly.. so ignition must be on.. ie not hard wired!!

Reason for sale is im cuttin debt! same as bike! its all going cept for work vehicles.. might get a thrasher bike to replace. :S we'll see what happens

PRICE $3700 --- NEW PRICE $2800 FIRM

any Q's pm or call 0419 272 088.. price is negotiable! want it goneski

P1000336.jpg

P1000333.jpg

P1000332.jpg

P1000331.jpg

Edited by cheap_frills
Link to comment
https://www.sau.com.au/forums/topic/128023-fs-84-e30-323i/
Share on other sites

hey sorry mate though i put price in :S

it has new front suspension, brake pads, oil and spark plugs, air filter, wiper blades, and aircon regassed the like done in late may.. has only done 200kms since then!!

last year had new brake lines/pads/discs installed, and clutch and have put about 8000 kms since.. i dont have this receipt as my old boss paid for it and used it for tax!

I dont drive it as ive got a work vehicle. hence why so little mialege over the last few years!

fergot to add its got power mirrors also

Edited by cheap_frills
Link to comment
https://www.sau.com.au/forums/topic/128023-fs-84-e30-323i/#findComment-2367382
Share on other sites

  • 2 months later...

YO BUMP......

now has 222600 on clock

soo busy with work and with people away have neglected to keep bumping

WILL TAKE $2800 FIRM... good project for P plater.. not desperate as u can tell. havent even put in trading post or paid adverts.. please No silly offers... any cheaper and its not worth selling. (not i wont be giving it away :) )

Edited by cheap_frills
Link to comment
https://www.sau.com.au/forums/topic/128023-fs-84-e30-323i/#findComment-2587485
Share on other sites

  • 3 weeks later...

guys this will suit a mech minded person. has a radiator leak now.. i changed a few hoses a short while back. and i from what i have seen their isnt a hole in the radiator. must be a loose/cracked hose or fitting.

found my new car.

$2000 FRIM needs to go

Link to comment
https://www.sau.com.au/forums/topic/128023-fs-84-e30-323i/#findComment-2643620
Share on other sites

  • 3 weeks later...
  • 3 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Thanks! Will get it looked at before winter 🥶 other than that she's a mint ride love it aye 
    • FWIW a lot of the local owners that do a big build tend to have cars that are perpetually broken. 
    • I just got this system but haven’t installed yet I got a Moroso sealed box (defect reasons) which will be set up same as their pic The quality is high grade, the correspondence I had with the owner (former head designer for Rockford Fosgate) was unbelievable, guiding me with what I needed. Even told me not to buy some things as it could be sorted in a different way at his loss. Just a bit of a bite with the exchange rate and don’t purchase gear in 1 hit that goes over $1,000 au, lol I forgot!  
    • Thanks mate for that reply. Very helpful.    it’s a 2022 400R so would most likely lose those features as you say.     I did a quick compare of a rv37 nav and heading for sale in Japan to q50 model. I’ll pop pics below. Seems  Japan spec head into top, nav unit second below it   below pic Q50 aud delivered     differences seem to be Aus delivered has a different plug top left hand side of head unit- not sure what and where it goes.   and nav unit Japanese tv37 had an extra plug put    Again I’m really not sure what each of these differences mean!       the actual plugs on a v37 and q50 screens look identical on both screens… pics below for comparing. (One screen was is a us delivered one) but should be same gps signals etc as Australia.    If it were as simple as swapping a nav unit from q50 aud delivered im interested -just want to figure out what the missing plug is for before spending big $ on a second hand part for it to not work, and I guess with the head unit, if the band expander does the job (I got a 20mHz so should get the range I’m after) so should narrow my issue down to nav unit only.  I’d love to know what the extra cable on rv37 does and if I eliminate that part what it’ll do to the setup,    and also, if I can figure out what that head unit plug difference is, what does that cable do and where does it got can it be altered or re-plugged?! Excuse my ignorance what is ACP/AA, what does that stand for? (Apple car play? Android air play)? so If I swapped head units to save using a band expander, I’d likely lose those better features to have an oem Unit operational. Better to use a band expander and retain AirPlay options and newer version of head unit     provably best to band expand it, and focus on the nav unit. th isn’t  a big deal/ would be cool to have it working  from what I can tel we use a PAL Signal and Japan uses a NTSC signal  I don’t know if there’s a co better or if the screen only reads NTSC, or if it’s the tv module that needs replacing… no big deal don’t need it but more of a curiosity thing on that!   Thanks for the info re tyre sensors, helpful and great to know.  I was reading the online manual off Japan website and it seemed to make it sound more confusing than it is  I guess a rim replacement would require the sensors to be moved to a new rim to carry that option over?!     Thanks for the info regarding diagnostic mode. I appreciate your help mate. Trying to brainstorm here to find a solution to get as much gadgets as I can working! I plan to get my local Nissan tech to have a look too who used to be at an Infiniti dealer back in the day to see if any thing they have or idea can find a soliton. But hoping anyone here has gone down the same route to make life easier!!   i guess identifying the cable/plug differences and what they do would be a great way of finding out if the units are transferable    thanks again 
    • No idea about the remote start part. If the V37 nav is anything like other Nissan JDM vehicles, you can't get the factory Japanese nav working in australia, a card from a different car almost certainly won't work, those cards are usually matched to the serial number of the DCU.  You could be possibly swap out the components from a AuDM Q50 to get it working, but if this is a new model (2021+) 400R, then you will lose the newer features like ACP/AA.  That said, if you have ACP/AA, just use google maps.. I assume a band expander would be required to get the local radio stations, but don't forget the Japanese FM band is narrower than ours, so you still might not be able to receive all Australian stations. I can't see any reason the tyre pressure sensors won't work here, there is the sensor unit inside the rim and the receiver nearby in the wheel well.  I have never had to change the batteries on my 2015 Q50, so I assume they last quite a while.  A straight battery change shouldn't need them to be re-registered as they are the same unit, that should only be required if you replace a sensor with a new one.   Word of warning, if you ever go into the 'secret' diagnostics mode on the main screen, DO NOT EVER do a 'reset' in this menu, it will erase all of your model specific data in the DCU and you will need a trip to a dealer to re-program it all, which would be particularly painful being an import.  This applies to the AuDM Q50 too.
×
×
  • Create New...