Jump to content
SAU Community

Recommended Posts

It's a good idea BUT to hire Mallala just for a weekday it's a solid few thousand because they need a firey and ambo peeps i believe, as for the weekend well thats a good few MORE thousand! As for A.I.R. I believe it's useable now, but not sure on the quality of it as i havn't seen it lately, and i have no idea of costs there...... one would think ALOT cheaper than Mallala. I'd say check the Mallala website and go out in a group and just cut laps on a practice day and have a BBQ lunch and stuff, would be a hell of a lot cheaper than hireing any track....... Just a thought

AUGUST

Saturday 12th Practice - Cars and Karts

SEPTEMBER

Saturday 9th Practice - Cars and Karts

OCTOBER

Saturday 21st Practice - Cars and Karts

http://www.mallala.com/

Link to comment
https://www.sau.com.au/forums/topic/128259-track-time/#findComment-2370151
Share on other sites

I looked into this once, for a weekend day its ~$3000-3800, ambulance on standby at track is approximately $800 for an 8 hour session. These prices are off the top of my head as I can't find my original email and it was a while ago. But basically the prices are great if you can organise 30-50 people, => 50 under $100 but otherwise for a small group it might pay to all turn up to a open circuit day and pay the $100

Link to comment
https://www.sau.com.au/forums/topic/128259-track-time/#findComment-2370410
Share on other sites

i too have investigated the above figures and its about spot on... unless you can get cams to approve a grant for the day (my contacts with cams board are no longer so im out of the question) then we wont be able to... generally you can get a grant for cams to cover part of the $ (say half)...

if anyone does want to try and round up 40 cars id be more than happy to pay 100-150 for a full 8hour prac day... grip and no grip :)

Link to comment
https://www.sau.com.au/forums/topic/128259-track-time/#findComment-2370650
Share on other sites

tried to organise a track day, u will receive plenty of people reply "i am keen".

And under 10 that will hand out the money at the final stage coz most people's car is not ready :cheers:

better join mallala's pratice day if u want to hit the track

http://www.mallala.com/practicedays.htm

Link to comment
https://www.sau.com.au/forums/topic/128259-track-time/#findComment-2372289
Share on other sites

I'd head up there, I would have to take it a little easy (not running nice exxy brake pads) but would most definitely still hit the track.

I would like to get subframe bushes and 3.9 diff installed prior.. If not its no biggy, just lay big single spinners as I leave corners.

post-382-1154438361.jpg

Link to comment
https://www.sau.com.au/forums/topic/128259-track-time/#findComment-2375177
Share on other sites

Its easy. Just turn up for one of the practice days.

Only costs around $80 from last time I did it from memory.

You get around 5 sessions of 15min each.

That was with bikes, cars and open top cars all having their own 5 sessions.

Is great fun you can go at your own pace with no real rules pitched at you except common sense.

There can be anything from race cars to toyota echos.

Helmets long sleeves etc needed of course.

Only thing I can say that intentional drifting is out as there are other cars out there trying to get around as quick as they can and may get pissed off.

Last time I spun out a few times as I built up a little more courage trying a little too hard.

Count me in for a day out. I dont get to many SAU functions but definetly in for a track day.

Edited by grepin
Link to comment
https://www.sau.com.au/forums/topic/128259-track-time/#findComment-2376825
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
    • I have a r34 sedan 1999 manual converted need some help with my speedometer it only reads upto 98km and then stops currently still running the auto cluster any easy fixes no speedo drive is connected yet, if someone has a video for wiring up the manual speedo sensor with the auto cluster please send through 
×
×
  • Create New...