Jump to content
SAU Community

Recommended Posts

I've spent the better part of the day preparing this, I've managed to squish Nissan FAST from 900mb to 800mb using 7-Zip. I've left out American and European bits (GR, GL, ER, EL1, EL2) which saves 600-690mb only leaving in the useful bits which is what we want: Japanese Domestic Market. I had to split it up into 100mb volumes as that is the limit free upload hosts allow. I got Nissan FAST originally from a torrent, and I've scanned it for viruses with clean results. The instructions and Readme's are there, I've also attached them to this post.

Required:

7-Zip, free: http://www.7-zip.org/

800MB of harddrive space to download it

Another 2.2GB to extract the files from the 7zip archives and install Nissan FAST.

Nissan_FAST_Instructions.zip

Hey guys

Ive read thru almost every page and havent seen an answer to questions regarding engine ser #'s. I'm getting the Wolf V500 for my RB26 swap into a 240Z and They need to confirm the model to sell me the correct ecu. So, if anyone can tell me what ser # 064170A came out of ( R32 or R33 ) I'd really appreciate it.There's also the #74243 cast into the block and 05U on both the head and block. Thanks alot.

Edited by Boostmonkey

Sorry about late reply, i didnt get any notification by email when this thread was updated:

post-51527-1229062409_thumb.jpg

Hi

Can you please check BNR32011509

How can I tell if the car has the origional engine, should it share the last section on this number.

Thanks in advance

Hi

Thanks for that, At least I know what month is was made in now. How do I work out what the model code means.

Cheers

Use this link to decode your model code

http://www.users.on.net/~goofyhsk/info/chassis_plate.html

It will help you decode everything except the last 4 letters, L, M, Z, G. The following is what i wrote back on page 39 of this thread about 10 posts down if you want to see my entire post.

I have been doing a lot of searching around on the forums for the answer to what the last letters mean on the model codes for the early model r32 GTR's (L,M,Z and G).

cameronbnr32 and garrysandy the only info i could find for you guys (and any one else wondering) was a post from funkymonkey back in 2004.

From what i read the letters L and M, which occupy Positions 8 + 9 in the model code, are known as VS Sign (VS Options)...

L means it has Projector Headlights

M means it has both climate comtrol + upgraded stereo

Letters Z and G occupy Positions 10 + 11 in the model code and are known as Pack Sign (Package Extras Sign)...

Z Im still not sure what it means but some guys believe it might be to do with the interior trim. RellikZephyr Thought Z = Black Interior Trim.

Cant be confirmed unless funkymonkey or someone else knows for sure what it means.

G from what i found means ABS and a Viscous LSD

Hope that helps a lil.

Hi

Thanks for the quick reply, I just have one question about the first Vin you run for me.

Because the model identification does not have a 7 or 8 in the last 3 digits, is it a V-spec 1

The number is KBNR32RXFSLMZG built 08/90.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That's a short. Find the short. It will be somewhere between that fuse and the headlight. Start by removing the plugs from the back of the headlight and dimmer switches, and measure resistance to earth. Supply side (power from the fuse) should have none. The other side should have resistance compatible with whatever globe(s) is there (which is relatively easy to say for a normal globe, perhaps not as easy to say for LEDs). Anyway, if you have very low resistance, you defo have a short. Then you just have to run the wiring like you're running the bowel of a dog (on the operating table) that has swallowed something it wasn't supposed to.
    • Hey guys, need help figuring out why my driver side (RH) fuse 15amp keeps blowing. The Driver Sides Headlamp is out, i replaced these a long time ago with LED ones that were working for 1-2 years. Now, the driver side light is out and i traced it back to a broken fuse. I replaced the 15 amp fuse in the engine bay and as soon as i flip the headlight on, it blows the new fuse. Any idea what's going on?
    • I found the same with Subaru’s.  I own and love the SG9 Forester, after that model 2008+, Subaru threw the ugly stick at all their line up and somehow managed to make them look worse with every succeeding year.  lol
    • It's something we all have to consider as time marches on. Also consider lifted rally MX5 conversion at that point.
    • I should be fine for a few more years, whilst I do have arthritis I also exercise and do mobility training every day to keep as fit and healthy as I can, military life, which is the actual cause of most of my joint issues, has set daily regimes, which I weirdly enjoy I also train alot smarter now, not really focusing on lots strength or puffy muscles, I'm more focused on maintaining what I have for my future older self, I actually train as much mobility now as I do exercising Check out this "simple" drill I have been doing daily prior to training now for a while now, this has worked wonders in my all round mobility   
×
×
  • Create New...