Jump to content
SAU Community

Recommended Posts

  On 24/01/2011 at 12:53 AM, Terry_GT-R34 said:

BNR34-400972

Thanks in advance for this.

first shot with most of the options

post-34711-0-68481100-1295860915_thumb.jpg

then i scrolled down to show the last option on the list

post-34711-0-65171200-1295860922_thumb.jpg

Edited by QWK32
  On 24/01/2011 at 9:17 AM, BunsenBurna said:

QWK32 thank you, I am grateful!! Now to interpret....hrmm

i'm not 100% on what everything means but i can tell you that the car is a

R32 GTR, 5sp Manual, HICAS, 4WD, that was made in September 1994

i think the colour code 326 means its a white car and the interior colour "G" i don't know. i also cant remember what the "2K" means sorry.

  On 24/01/2011 at 9:31 AM, QWK32 said:

i'm not 100% on what everything means but i can tell you that the car is a

R32 GTR, 5sp Manual, HICAS, 4WD, that was made in September 1994

i think the colour code 326 means its a white car and the interior colour "G" i don't know. i also cant remember what the "2K" means sorry.

Thanks again QWK32. The 7AA and 2K are confusing me still. At least the rest checks out so far though! On with the test drive and vehicle inspection...

7AA and 2K anyone?!

  On 24/01/2011 at 9:34 AM, BunsenBurna said:

Thanks again QWK32. The 7AA and 2K are confusing me still. At least the rest checks out so far though! On with the test drive and vehicle inspection...

7AA and 2K anyone?!

just remembered, i think the "2K" means its a 2 door. 4 door shows up as something like "4K". i'll see if i can check what the 7AA is, there is a model code break down in fast, give me a sec thumbsup.gif

edit: sorry mate, i cant make sense of the model code breakdown for the "7AA" bit. the rest of it i can, just not that last bit.

Edited by QWK32
  On 24/01/2011 at 9:52 AM, QWK32 said:

here mate, cant see any factory options fitted.

post-34711-0-66526800-1295862716_thumb.jpg

Cool, much appreciated. Very interesting given I know it at least has the Dayz carbon dash inserts and seems to have a few other bits and pieces.

  On 24/01/2011 at 10:01 AM, capturedcreation said:

Cool, much appreciated. Very interesting given I know it at least has the Dayz carbon dash inserts and seems to have a few other bits and pieces.

i think you'll find that DAYZ options are fitted after factory. they are a dealer fitted, but nissan approved, option. search the stagea section for the DAYZ threads, plenty of info floating around. if you cant find the threads with the brochures pics let me know and i'll dig up the copies i have saved, they are interesting to have a look at.

Edited by QWK32
  On 24/01/2011 at 10:03 AM, QWK32 said:

i think you'll find that DAYZ options are fitted after factory. they are a dealer fitted, but nissan approved, option. search the stagea section for the DAYZ threads, plenty of info floating around. if you cant find the threads with the brochures pics let me know and i'll dig up the copies i have saved, they are interesting to have a look at.

Hmmm, that's interesting in itself, I always assumed they were factory options. I'll do some searching. Thanks!

  On 24/01/2011 at 10:38 PM, Psymon said:

Here you go. No options fitted to this one. You can tell by the five dashes at the end of the model code.

Thanks buddy, I noticed that on the build plate. The rest is all good though :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...