Jump to content
SAU Community

VINS you want "fasted"


Recommended Posts

Is this a genuine 1999 260RS Autech?

VIN Number 6U900WGNC34131750

Looking to buy one as our first Family car, i have found one but i just want to make sure its Genuine.

Cheers

post-3573-0-97072900-1318559700_thumb.png

Link to comment
Share on other sites

hi guys,

just had a look and it says my VIN is:

6A91MPORTXHWL4001

Its a 2/99 GTSt R32

can u make any sense of that?

cheers

Nathan.

That should be your import/compliance plate. The VIN we are after should be on the left-hand side of that one, on a green plate. =-]

Link to comment
Share on other sites

some pics...

Yep, like that plate Nathan.

From experience, if the plate has been remade and has funny letters like 1MPORT, the VIN never works.

As it is, I tried this VIN: HCR32 094224 and it doesn't work. It could be an Australian delivered R32, I dunno... but the VIN that is pressed onto the firewall (under the plate) looks odd too.. The leading "H" is not straight.

I really don't know why this is.

Link to comment
Share on other sites

No good. Do you want to confirm the plate? BNR34 402974. It might not start with a "4".

Hi Randy,

The number I gave you is correct; both on the firewall as well as the plate. A puzzle?

Regards T

Link to comment
Share on other sites

The URL for those images is "/.../2011 NUR/Matthew-5.jpg" - is it a NUR Spec car???

If so, were they re-numbered by the factory when they were rebuild from their first incarnation as a 'normal' GT-R?

Link to comment
Share on other sites

You can tell that just by the colour of the build plate ;)

Nurs didn't get a special build, they followed the normal build sequence for 34s. Most people have the early edition of FAST which cuts off somewhere in late '01, meaning Nurs won't decode on them.

Link to comment
Share on other sites

Hi Randy,

The number I gave you is correct; both on the firewall as well as the plate. A puzzle?

Regards T

Could be! The number is quite high, so if your car was made after 2001, my CD's don't cover it. =-[

-Steve

Link to comment
Share on other sites

You can tell that just by the colour of the build plate ;)

Nurs didn't get a special build, they followed the normal build sequence for 34s. Most people have the early edition of FAST which cuts off somewhere in late '01, meaning Nurs won't decode on them.

Yes, this. =-]

My discs are 2001.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello again, I just want to tell you that i found the reason why my bnr32 is going out in right corners. I had my car tuned by a company and they fitted the Emu Classic and a new fuel pump in 2021. I checked the loom, changed the walbro fuel pump with a Deatschwerks fuel pump. None of this helped. Then I checked the fuel pressure and thought I was crazy. It was tuned with over 7 bar ( over 100psi) !!! But why? So I checked the fuel return line and saw that it was closed. That was probably also the reason why the tuner replaced the fuel pump, but he tuned the Emu with the 7 bar 🫣 The map in the emu has now been changed and evertyhing is fine.
    • I'm going to vote for considering going to the effort to close the lash down to the minimum. My bro-in-law got around to checking the clearances on the 3SGE in his Caldina. Was a bit fat all over. New shims at lowest allowable lash, and the car is remarkably better to drive. It appears that the increase in both total lift and duration that you get from doing this is worth a lot more than you might expect. I have been having evil (and expensive and time consuming) thoughts about doing it to mine, and I don't even think I have a problem. Not that I'd know, though.
    • Thanks for that, it actually sounds fine to me. What oil weight are you running and what kind of oil pressure do you see around idle RPM and a bit over it?
    • https://youtu.be/CCHaKUhZi34?si=PNdluupk9TWFtvws
    • Maybe record a video and post it up on YouTube and link it back here 
×
×
  • Create New...