Jump to content
SAU Community

Recommended Posts

I have the same MZG which doesn't seem to decode per writeups.

I do have the rear wiper.

I do have climate control

No clue on differential yet.

Can anyone help?

M = P+Q (Climate control (A/C) + Upgraded Sound (Sound System)

Z = Cold pack (Heated Mirrors)?

G = B+D (ABS + Visc LSD)

But since you don't have Rear Wiper / Climate Control... MZG should mean you don't have any of those... To save weight.

Your R32 is Gun Metal Grey and was built in Dec 1990... Signs point to a description of the Nismo Edition...

BUT! I am not saying it is... Can you find the Turbo Part numbers? Or do you know what Turbos you have on?

M = P+Q (Climate control (A/C) + Upgraded Sound (Sound System)

Z = Cold pack (Heated Mirrors)?

G = B+D (ABS + Visc LSD)

But since you don't have Rear Wiper / Climate Control... MZG should mean you don't have any of those... To save weight.

Your R32 is Gun Metal Grey and was built in Dec 1990... Signs point to a description of the Nismo Edition...

BUT! I am not saying it is... Can you find the Turbo Part numbers? Or do you know what Turbos you have on?

I have climate control

I have rear wiper

Stereo and all component s were missing when I got the car

I really don't know which diff (or diffs) are in the car right now but the factory service manual mentions nothing of a viscous diff in front or rear of GTR

I have ABS

Brakes are gold calipers Sumitumo up front (brembo?)

And grey calipers in rear

I'll check mirrors next time at the shop

Turbo part numbers are:

EA0138J

14411-24UD4

466071-6D

post-136202-0-91627400-1427017772_thumb.jpg

post-136202-0-45910800-1427017789_thumb.jpg

post-136202-0-03361000-1427017803_thumb.jpg

post-136202-0-84676000-1427017816_thumb.jpg

post-136202-0-27589200-1427017872_thumb.jpg

Edited by HarrisRacing

I have climate control

I have rear wiper

Stereo and all component s were missing when I got the car

I really don't know which diff (or diffs) are in the car right now but the factory service manual mentions nothing of a viscous diff in front or rear of GTR

I have ABS

Brakes are gold calipers Sumitumo up front (brembo?)

And grey calipers in rear

I'll check mirrors next time at the shop

Turbo part numbers are:

EA0138J

14411-24UD4

466071-6D

Ok cool!

I just realised I read your post wrong *Doh* >_< you DO have A/C / Rear Wiper and Stereo / ABS :)

So scrap the thing I said about Nismo.

You have a base model R32 GTR built in Dec 1990.

Stock Nissan brakes, it looks gold as they dark grey colour would have just faded over the years.

Turbo Part Numbers check out to be R32 / R33 GTR stock turbos (Both same).

Mechanical LSD was standard on the GTR's and Viscous was standard on all Turbo models, hence your R32 is Twin Turbo, it will have it.

And yeah, check the Mirror Switch.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...