Jump to content
SAU Community

Recommended Posts

:P i'm looking to maybe sell my hks turbo kit which is on its way to australia from japan now.

the kit consists of: hks ballbearing 28/30 (or35 mabe lol) turbo sitting on a topmount exzorst manifold, with HKS external wastegate(with 3 springs for different boost pressure) with screamer pipe. i also have the custom made dump-pipe made for this topmount turbokit. the kit also has all oil lines etc. the kit has only done 500km.

i also have hks cams that came with the kit. don't know much about them lol. but hopefully the pics help.

$3500 or nearest offer for the whole lot.

post-11080-1154502845.jpg

post-11080-1154502981.jpg

post-11080-1154503043.jpg

post-11080-1154503080.jpg

post-11080-1154588515.jpg

post-11080-1154588587.jpg

post-11080-1154588663.jpg

post-11080-1154588782.jpg

Edited by IMPORT-G

with the hks cams

could be interested in them

jsut depends how much you were wanting for them

i can give ya 300 to start off with price for the cams

but you have to work out yourself how much ya want for them

Post a price or the thread will be closed.

Im confused, you are trying to sell a kit that you are unsure of the value on and you cant confirm exactly what you are selling? That seems strange.

Really need to know what cams they are?

Are they for VVT or not.... what is the lift?

Part no.s perhaps hehehe....If they are the cams I'm after I would be willing to pay $400

HKS cams in Aust brand new at $826 a set these are second hand, and you don't not how worn these are...

Roy: the hks GT badge still has its protective sticker on>wouldn't you think if this kit was thrashed this sticker would have peeled off from the heat?

the kit has onlydone 500km, i know the owner in japan. he had this on his r33 but got rid of the whole whole engine for a RB26 for more power.

i also have the whole exzorst from this turbo kit. its ABFLUG

Edited by IMPORT-G

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Unfortunately haven’t taken pics yet after it was finished. All the edges are hemmed nicely, just had to cut holes for the gear shifter and seat bolts and seat belt bolts in the rear. The molds seem like they’re done with steam and a layer of glue on the underside to hold a bit of shape but still soft enough that it’s a good fit when it’s all pressed down.
    • When's the rear mounted turbo kit coming? Needs dose and V8 chop idle lol.
    • I was very unimpressed with how the car came up from the A pillar forward, before I hit things (twice). It all has to go. It had to go, but now it has to go... more. So we finally found the very first Shennanigans with the entirely perfectly setup engine that had no problems being pulled apart to improve on 'was perfectly fine'. Cam bearings looked a bit... stock. Which isn't entirely bad given they were stock and this is a ~20 year old engine. So new cam bearings are on the way because it's somewhat difficult to get to this stage to do it later, and it will trash the block. It was quite unusual that it wasn't done when the perfectly new-looking VCM cam was originally installed by [unknown] What IS unusual is the cam that was installed there was advanced SIX degrees. As to why there is no way to know.. however it could have been @Dose Pipe Sutututu's mate who wanted a larger cam sound but also wanted it to come on earlier to be more usable. This is my dyno sheet with the previous setup - This cam is not supposed to peak until 7000+ RPM, according to VCM. This is what lead me down the whole 'my heads/intake setup is running out of puff and can't support the cam' line of thinking to begin with. Anyway too late now - New cam is in! It could be rather funny if this smaller cam acts like a larger cam because it isn't advanced six degrees. In the spirit of everything is working amazingly - the COMP cam required no dialling in whatsoever. It was about 0.5 degrees advanced, which seems pretty bang on. Any adjustment either way would be further out. I'm told as a chain breaks in it ends up regarding back about 0.5 a degree as the chain breaks in, making it bang on. In the spirit of everything was previously working amazingly - The timing gear that was taken out turned out to be was an N-Motion double timing chain kit, with adjustable cam gear (which is how it was 6 degrees advanced) and all looks entirely perfectly new. It also had a Torrington bearing, which was one of the reasons I ended up getting the Cloyes kit which they used in the C5R 24 hour racecar - Because I couldn't confirm what was in the engine when talking to Tony Mamo. I did believe however it was a Double chain kit of some kind... but found no supporting documentation or evidence for it.
    • I recently did this to my R33 with the full set from Car Mats Direct, they can't do the vinyl anymore that's advertised on the website due to a supplier issue so I ended up with the Black Loop Pile which looks great. I went all out with rubber sound deadening sheets from Repco and also added the sound deadening foam layer option with the carpet. Makes a world of difference and got rid of all the weird smells in the 29 year old interior. It was a bit of work but I'd 100% recommend it, Car Mats Direct had awesome customer service and quick postage. Replaced my seats with some sporty ones from Autotechnia while I was at it, feels like a new car.
×
×
  • Create New...