Jump to content
SAU Community

Eoi. R33/34 Rb25 Greddy Knockoff Inlet Manifold Possibly $180ea


Recommended Posts

if it ever happens is there a chance of RB26 plenums?

are you crazy?

I wish I could get a RB26 to fit my RB25easily. The adapters are so hard to find!

Edited by The Mafia
  • Replies 196
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Pics of the SR20 items are useless :mad:

I have seen a decent plenum casting for the sr20 and a very crappy version for the rb25; both from the same manufacturer :mellow: That is why i would prefer someone to inspect the sample first, otherwise i'll happily give it a miss.

well with or without group buy, I'm geting one for myself...besides its not as though I'm getting profit out of these things...if people are interested enough I can prolly get $20 cheaper? not much for the effort to organise shipping, etc etc....

if you want to give it a miss I wouldn't care less...

anyways I'll be ordering in so you ppls whoever interested enough can either order with me or wait for my plenum to arrive about 2-3weeks or so...then I'll post the picture..

however by that time I cannot guarantee that the plenums are not sold out, judging from high demands...anyways each to their own...

I'm going to autotechnica tommorow..so will post pics for SR20 plenum

this is the SR20 Plenum

I went to distributer, however I just realised that the package does not include any gaskets..I asked about it, and apparently autotechnica don't intend to make the gaskets...

anyways I dun think I'm getting one from them...I'll get the trust ones I guess

if you guys are still keen you can pm me...

post-23806-1161329290.jpg

post-23806-1161329345.jpg

post-23806-1161329395.jpg

post-23806-1161329419.jpg

post-23806-1161329441.jpg

post-23806-1161329464.jpg

I can get my hands on a front facing RB25 Plenum that will 100% fit an R33 and I can get it at the very good price.

If somebody is 100% committed to getting it, testing it and doing all the review on it, I can get one.

I need somebody who isn't going to get it and just sit it there for 6 weeks though.

BASS OUT

I can get my hands on a front facing RB25 Plenum that will 100% fit an R33 and I can get it at the very good price.

If somebody is 100% committed to getting it, testing it and doing all the review on it, I can get one.

I need somebody who isn't going to get it and just sit it there for 6 weeks though.

BASS OUT

I'll definately be interested after the testing is completed and the results are put up.

You might want to message Sydneykid - earlier in this thread he was interested in testig the original group buy plenum. Maybe he'll try this one?

I can get my hands on a front facing RB25 Plenum that will 100% fit an R33 and I can get it at the very good price.

If somebody is 100% committed to getting it, testing it and doing all the review on it, I can get one.

I need somebody who isn't going to get it and just sit it there for 6 weeks though.

BASS OUT

Hey Pete,

I'm interested!! ;)

Can we talk at MAS, to discuss what tests, reports, etc are required?

Okay gents I have official pricing from somebody who has these items in stock in Japan.

He regularly supplies into Europe.

He has given me some pricing to work with....

5 off $359 + Freight in whatever option you like.

10 off $289 + Freight

Freight....

EMS Courier ca. 3-5 Days to the UK, Europe, USA, Canada, Australia, New Zealand, Middle East

Au $182

SAL Registed ca. 5-12 Days economy mail to the UK, Europe, USA, Canada, Australia, New Zealand, Middle East

Au $140

Super Economy See mail 4-8 weeks

Au $78

There is ONE at a special price on the condition that somebody gets the unit, runs up on the dyno before and after fitment and takes photos of the fitting etc.

You don't get nothing for nothing these days. You MUST be able to fit it immediately upon receiving and you would recieve the part in about a week from ordering.......

Al..... Can you fit immediatly?

- Does the plenum come with full gaskets, hoses, etc; just like the GReddy unit?

- My mechanic will probably not be able to fit it till early January, as he is pretty busy.

- Also if my car was to be the test/trial car, the plenum casting would have to be of a satisfactory standard, otherwise there is no way i'll spend money installing something i am not happy with. And this can't be decided till my mechanic and myself see the unit first hand.

- As they are coming from Japan, does this mean they are NOT a China copy?

at those prices, I'm very very interested. Someone hurry up and test the unit!

Hey Bassjunky - Check with sydneykid - he likes to test this sort of thing.

Whats the special price?

I am in the position to fit as I have taken mine off before, but like al said it needs to come with every thing included for fitment. Also 2 dyno runs aint free, and the second run would require some fine tuning of timming and maybe some fuel etc.

The time factor is no problem for me, but would rest on when I could book it onto the dyno.

Gents.

I don't know whether it comes with all the Gaskets and things just like the GReddy unit.

This is why we are testing it. Not just the performance but the supply as well.

We need someone who can fit right away. The tuning and fitting and all that is up to you. The special price is there to encourage somebody to purchase one, fit it and see how it goes.

Al. Lots of things that 'come from Japan' are actually made elsewhere, but as I understand it, these castings come from the same factory as the GReddy ones do.

As I have not seen one I am simply working as a go-between with the supplier who I have dealth with in the past.

If you are 100% serious to test, please PM me and we can arrange things.

Cheers

BASS OUT

PS. The special price is UNBEATABLE

Even if you had to buy all new gaskets and nuts and bolts, it's still Uber Cheap!

I just recieved word that there are no gaskets included.

It is only the cast manifold.

We can take order immediately on the units but the test one can be immediate.

Anyone willing to take one for the team?

If you are all REALLY worried about the casting quality, we could easily have a them all extrude honed when they arrive. Would cost another hundred or so but there would be 0% worry about casting quality.

BASS OUT

I just recieved word that there are no gaskets included.

It is only the cast manifold.

We can take order immediately on the units but the test one can be immediate.

Anyone willing to take one for the team?

If you are all REALLY worried about the casting quality, we could easily have a them all extrude honed when they arrive. Would cost another hundred or so but there would be 0% worry about casting quality.

BASS OUT

My car needs to be tuned anyway so I could be tempted to test a sample unit at the right price - I am also going to be fitting the T04E soon so I could do a 3 way test before, after and with a bigger turbo ... anyway give me a call on 0414 502 250 if you want to see what we can work out.

Thanks,

Craig.

besides the gasket, do they bolt straight on with all the fittings etc. Ie, is it just a case of removing the old plenum and placing this one on the runners directly?

And would I be able to use the existing gasket, I have never had to change it before when doing injectors etc...

Bass: You have a PM

My car needs to be tuned anyway so I could be tempted to test a sample unit at the right price - I am also going to be fitting the T04E soon so I could do a 3 way test before, after and with a bigger turbo ... anyway give me a call on 0414 502 250 if you want to see what we can work out.

Thanks,

Craig.

That would be an excellent plan! If you could swap it back to the normal one after you fit the bigger turbo that'd be even better!

Bass, would the ones you're organising fit an R34 or R33 only?

I understand they are a bolt on item.

Yes, they don't come with gaskets, but I would just use my existing ones, unless they were shagged.

The ones I'm organising are specified for R33 only, nobody has tested on R34 so we aren't sure.

So I've got two people who are red hot.... I'll see if I can get two :rofl:

BASS OUT

Just spoke to my mechanic.

He says the gasket should not be a problem as the factory metal gasket is reusable. He also claimed that apart from one mod, the copy plenium is just as hard/easy to fit as the geniune GReddy item.

The one modification refers to the fitting of the idle controll motor; the copy plenium he fitted for another customer has to be slightly modified, as the casting was not 100% and the idle controll motor didn't line up properly. Nothing a small grinding tool couldn't fix.

The R34 fuel rails have different mounting positions to the R33, so you may need to make special adaptor brackets to fit a 34 rail onto this plenium, unless it has various mounting holes to accomodate for each model.

  • 2 weeks later...

IS this going ahead?

Is somebody testing fitting one at all?

Before Christmas do you think? It would make a great christmas present for myself

Enquiry only, not hassling

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Already looked at a few prior to getting the MX5, really nice car, had all the mod cons, but I wasn't really sold on the new "look" I did miss my 2017 Limited, and I personally prefer the "look" of the older car over the new model, but, when pondering I kept going back looking at MX5's But it was same same for the new ND's, I wasn't sold on the new "look", especially the RF with its weird roof, which only half goes down, like a targa top sort of thing As I stated before, I did look at NC's, but the cars I looked at were PRHT's, but I didn't like their roof line "look" of the PRHT, until I saw the soft top version, (someone on SAU posted a for sale ad for one with a soft top that caught my attention, you can blame them for my choice.....🤣) and.... that old style detachable hard tops were available for them, which keeps the old MX5 more smoother flowing roof line, and the more rounded body style, similar to the NA-NB, to me, the arse end of the ND looks to "modern" Much like how I prefer the NC1 front bar, over the later models How long will I keep this car for is unknown, but currently, there's nothing else out there that "floats my boat" for a small, fun, little "sports car", that I can play with and enjoy looking at and driving But, who knows what the future holds, and going off current new car styling, if I replace it, it will be a older model something something       
    • looking forward to your t56 swap man its a game changer if it works! 
    • So, when are you trying the new GR86 or BRZ?
    • Uncle Duncan Yeap, FI Interchiller  Works well, normal IAT's cruising with the WTA only went from 50°c+ to 25-30°c with the interchiller  Before, when on it hard, the IAT would see 80-90°c, now, the highest has been was around 38°c IIRC IAT is measured under the blower hat I recommend it for the street or strip where your only on it hard for 10 or so seconds, but it wouldn't be efficient for sustained track use as it would heat soak from the AC turning off or whatever it does during WOT to protect the compressor It really needs the AC running for it to not heat soak and keep the WTA coolant chilled My WTA coolant temps when just cruising is around 2°c
    • Hey Mark...sorry to interrupt your career change to hair dressing... but...did you ever fit the interchiller to the commodore, and if so how was it? And, who made it?
×
×
  • Create New...