Jump to content
SAU Community

Rb25det Into Cefiro

ls1ben

By ls1ben,
in Four Door Family & Wagoneers

 Share

Recommended Posts

ls1ben Collaborator

ls1ben

Posted
Posted

Hi Guys,

Just wondering if you could help me out with a few questions.

I have a 90 cefiro that's currently running a rb20 non turbo (the twin cam version) with auto and I have a rb25det and gearbox that I want to put in.

1. will the engine mounts line up?

2. will I be able to use the original cross member / power steering rack and if not will a r33 one fit?

3. I also have r33 front and rear brakes - can anyone help as to what's involved in fitting them

4. I have a r33 tail shaft and a r200 diff - will these help?

5. what radiator is recommended?

I have done a search but cannot really find straight answers to these questions. Any help you could give would be much appreciated.

Cheers.

Link to comment
Share on other sites
S13Deviat Grand Master

S13Deviat

Posted
Posted

Hi Guys,

Just wondering if you could help me out with a few questions.

I have a 90 cefiro that's currently running a rb20 non turbo (the twin cam version) with auto and I have a rb25det and gearbox that I want to put in.

1. will the engine mounts line up?

Yes but i replaced mine with Nismo mounts due to extra weight of the RB25 which sit the engine a tiny bit higher (few cms)

2. will I be able to use the original cross member / power steering rack and if not will a r33 one fit?

Cross members MAY need adjusting, mine did. Power Steering rack is fine.

3. I also have r33 front and rear brakes - can anyone help as to what's involved in fitting them

Just do a search for 5 Stud Conversion threads..... plenty of em in the Cefiro section. Basically if you got the rotors, hubs, calipers, brake boosters etc it should be a straight swap...

4. I have a r33 tail shaft and a r200 diff - will these help?

The tail shaft needs to be modified when using a R33 gearbox... the yoke needs to be shortened....

5. what radiator is recommended?

What ever u choose buddy.... go an aftermarket one if u want to be extra safe... or a GTR one... or just leave stock one in...

Most time consuming part will be modifiying the wiring loom to bet everything 'in sync'

Also you will need to get yourself a modified Speedo drive to match up with the 33 gearbox. A lot of import companies will sell em for around $300-$350

I assume you have the ECU, loom etc.

Finally enjoy the power of RB25DET Ceffie

Ando

Link to comment
Share on other sites
S13Deviat Grand Master

S13Deviat

Posted
Posted
Thank you very much Ando.

One last thing - with the wiring did you go about this yourself? do you have any of the wiring diagrams?

Champ my mechanic did the wiring loom and it took him AAAGGGGEEEESSSSS!!!! Its a serious job...unless u know ur shizzle i would get someone who knows what there doing.... and no i dont have a wiring diagram :laugh:

Link to comment
Share on other sites
DJ984 Mentor

DJ984

Posted
Posted
So Davo you got a Ceffie yet??? :blush: Or you being soft :blush:

ha ha! still being soft man :blink:

once this stuff with the R is sorted though I'm so keen to have one mad ass drift bitch cefiro!!! :) You'll know about it when i do! he he!

Link to comment
Share on other sites
ls1ben Collaborator

ls1ben

Posted
  • Author
Posted
im interested in the conversion myself. could i just use an RB25 loom? i wouldve thought it would plug right in? if a31deviant could provide some more information that'd be great.

cheers

Correct me if i am wrong but from what i have fouind out so far you just use the r33 engine loom and plug that into the r33 computer and then its just the dash loom thats the problem as this will not be a straight plug in. (i say just like its easy...)

Link to comment
Share on other sites
  • 3 years later...
NICKCEFFY Enthusiast

NICKCEFFY

Posted
Posted

I've done it on my laurel, which you may as well say is the same, there are two power wires you need to pick up in the enigne bay, thers usually a plug in the front corner of the bay near the airbox, use the standard wiring loom for the wiper system (strip this out of your standard 20 loom) then off hand i think there was about half a dozen wires to get the temp guage warnign lights etc going,

I used these links to find the wires in the 25 dash plugs

http://forums.hybridz.org/index.php?showtopic=50138

there was a link to the r31 skyline club and these had pin out of the dash plugs I'll try and chase it down for ya! :D its saying it can't find the website now

maybe took me a couple of nights to sort out but I've had the car running for about 18 months now with out any issues wiring wise.

Link to comment
Share on other sites
Spurdo Experienced

Spurdo

Posted
Posted (edited)

a z32 turbo manual box is exactly the same as the r33 turbo box, except z32 has the mechanical speedo drive which connects straight up to an r32 (and i assume a31 also) speedo cable. thats what i've done anyway. just a useless piece of info for people reading this who want to do it with one less complication

Edited by jonboy
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Rezz
      Gran Turismo 7 Time trial

      By Rezz · Posted

      Noice one 👍 I've done a 1:16.300 at Watkins Glen, will keep at it. Still have to knock off half a second at Suzuka in the Roadster
    • niZmO_Man
      Gran Turismo 7 Time trial

      By niZmO_Man · Posted

      Two golds! Struggled to get silver on Gran Valley.
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Interesting that it has 2 to the USB stick. Are the ones to the USB stick different? Or labelled anything at all? Telstra 4G is Band 28 is the long range one you want, it's 700mHz. I'm trying to do some reading on the Cel-Fi stuff, but I can't find any decent info online that makes me feel comfortable being able to work out the sort of antennas we could get away to swapping it over to. The antennas I'm starting to do some stuff with at work, are a transparent antenna. They're designed to stick onto the window. Which means you wouldn't even have the antenna outside the car. Volkswagen have just started using the exact same types of antennas on some of their new cars (And from the same antenna manufacturer). But, RF stuff is a bit of a dark art some days, and getting it wrong in your car could make for a terrible waste of money trying to swap antennas :S
    • MBS206
      What do you do with all the spares?

      By MBS206 · Posted

      I'm not going to lie Duncan, Saturday and Sunday were pretty rough days. The sort of work I was doing would previously have ended up with me spending about an hour and a half chatting with Neil. Firstly about something I had a question about, and then both of us rambling off on tangents.  I think how Neil did things, and his attitude to getting it done is helping me in part to get this stuff done. Then I can actually do the things I enjoy more easily  
    • RBjay34
      ER, HR bonnet question

      By RBjay34 · Posted

      Talked to another R34 GT-T owner, he said bonnet of his car once fell and slammed from full height because of strong wind at a car show and nothing was damaged or broken, so I guess I'm just overthinking some things but yeah, just making sure I'm not damaging the car anyhow cause wanna keep it for a long time.
×
×
  • Create New...