Jump to content
SAU Community

Recommended Posts

Hey everyone just after a bit of advice.

My brother is just about to buy a r33 4 door. He asked me is it worth paying the extra couple of grand to get series 2? I wouldnt really know because i drive a 32, so If some of you 33 drivers out there could enlighten me on some of the differences between S1 and 2 it would b much appreciated.

Cheers. Ben

Link to comment
https://www.sau.com.au/forums/topic/128666-r33-s1-vs-s2/
Share on other sites

Internally......different coils to a series one. turbo has a plastc compressor wheel (series one has a metal one), both have ceramic exhaust wheel. Engine is the same and so is the gearbox etc.

Or if you mean internally as in Dash etc, the S2 has a nicer looking airbag steering wheel, dash is the same but surround is slightly different (the platic is more textured and the coin holder on the right of the steering wheel is gone).

I am sure there is some more but cant think of it all right now. I think that the S2 is worth the extra $$ for the updated front end.

Link to comment
https://www.sau.com.au/forums/topic/128666-r33-s1-vs-s2/#findComment-2379252
Share on other sites

i imported a stock clean R33 series 1 5spd turbo sedan for $11500 inc on road costs.

I would expect you would pay upwards of $14K on the road for a clean series 2 5spd turbo sedan.

Can you show me a 5 speed S2 GTST thats Turbo and $14k or $15k Id will buy it today, thats about the price Im paying for my R33 GTST S2 Auto.

Link to comment
https://www.sau.com.au/forums/topic/128666-r33-s1-vs-s2/#findComment-2380568
Share on other sites

Can you show me a 5 speed S2 GTST thats Turbo and $14k or $15k Id will buy it today, thats about the price Im paying for my R33 GTST S2 Auto.

Checking the jap auction sites, the price they go for would making $15K a reasonable figure for one. If you are buying locally from a yard or privately, you will pay more.

I bought mine through autoworx, cost me 260,000yen direct from the auctions. I didnt enquire about Series 2 turbo manual sedans as I didnt want one, but surely they would only be $3-4K more than a series 1.

Link to comment
https://www.sau.com.au/forums/topic/128666-r33-s1-vs-s2/#findComment-2385589
Share on other sites

  • 4 weeks later...
Hey everyone just after a bit of advice.

My brother is just about to buy a r33 4 door. He asked me is it worth paying the extra couple of grand to get series 2? I wouldnt really know because i drive a 32, so If some of you 33 drivers out there could enlighten me on some of the differences between S1 and 2 it would b much appreciated.

Cheers. Ben

Paul from Autoworx wrote a R33 Skyline buyers guide which covers how to tell the difference between a Series 1 and Series II. Its free - I think you just have to sign up to the email newsletter to get the info. Heres the link http://www.autoworx.com.au/mail.htm

Link to comment
https://www.sau.com.au/forums/topic/128666-r33-s1-vs-s2/#findComment-2453165
Share on other sites

Series one is better :P

Series II has different lights and a bit of a squarer front (to tell yo uthe truth its down to personal preference but i've never been a fan of the 2)

The series II has the airbags from memory.

Tell him to buy mine Ben :blink: its not a four door but what the heck - throw on some roof racks n store the kids up there :)

Link to comment
https://www.sau.com.au/forums/topic/128666-r33-s1-vs-s2/#findComment-2453205
Share on other sites

HAHA thx Lauren

he bought a car. Ended up buying off someone from here, i cant remember who though.

Its a white SII done 80,000 km, nearly dead stock besides bigger front lip and 17's. he paid $16500. Its very tidy.

Link to comment
https://www.sau.com.au/forums/topic/128666-r33-s1-vs-s2/#findComment-2455041
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...