Jump to content
SAU Community

Recommended Posts

hi all

i called UAS and got a quote for $250 to install a split dump/front pipe, high flow cat and intake pipe.....the pipe that connects to the front of the turbo and AFM

they said it would take 2 and a half hours to do everything

just thought the price was abit steep....was looking at $200 max

anyone know places that could do it abit cheaper......or am i better off getting it properly done for $250?

thanks

you pay for what you get go to UAS which is a shop with a good rep and customer service etc etc you will pay top dollar, but you can have confidence in what they do. pay a hundred dollars to a backyard mechanica and they could **** up you car and they wont have insurance.

ask tuffy mufflers or something. Don't need a performance shop to fit a pre-made exhaust system. Probably a bit cheaper

agree.

UAS is excellent and they were my workshop of choice back in the day... but this aint a specialised job. any exhaust place ought to be able to pull it off

get it done anywhere u like its an easy job, you dont need to get it done at a performance workshop. plenty of places charge closer to $80/hr rather than $100@uas which makes a difference in itself.

do u have a dump pipe gasket? thats worth around $30 from nissan which they may have taken into account when quoting you. its not bad to re use it if it is in good condition but its safer to replace it.

the reason i was going to goto UAS was because i live 5 -10 mins away

not too sure what the dump pipe gasket is but i thought i could re-use the stock parts

i was going to DIY but i dont have any spare time...i figured that im paying UAS $100 an hour to change some bolts around

thanks guys for ur opinions

im probably going to goto a local exhaust shop which should be cheaper

Um, as everyone else said, you get what you pay for. whether you want a workshop to look after your car, or do the quick and dirty and get you out of there ASAP.

Basically, you have to factor in gaskets. New bolts.

What happens if they break a bolt? it is highly likely that a turbo bolt will be broken. Then they have to remove that bolt by drilling it out and using an easy out.

that all takes time.

Also, half the time, the "bolt on" things don't bolt straight on. Mine didn't.

we had to grind some pipe that was sticking out of the flange. Still, the pipe angle was wrong. I had to return the pipe and get another one.

I did all this myself at home.

Lets just not count the time to jack it and put it on stands, since the workshop has a hoist.

It still took me a whole day including driving around buying things and swapping the pipe. I'm not a nooby either.

I guess that's why I like to get a complete quote, rather than an hour based quote.

Sometimes hour based quotes can end up cheaper, but if you pay for time and somethign goes wrong, the meter really starts ticking.

250 may seem steep providing everything bolts straight up and no dramas, but usually there are.

If UAS had to spend 4 hours doin git, then suddenly that 250 seems like good value :blush:

I got quoted $1000 from Liverpool exhaust to fit a dump pipe and front pipe to R32 GTR, this is NOT including the Cat , and im supplying Trust dump+front pipe ( which should bolt straight on , no probs) nd the cat.

Thats for comin'...

I got quoted $1000 from Liverpool exhaust to fit a dump pipe and front pipe to R32 GTR, this is NOT including the Cat , and im supplying Trust dump+front pipe ( which should bolt straight on , no probs) nd the cat.

Thats for comin'...

have you ever tried to put dump pipes on a gtr?

castle hill exhausts is in the same complex as far as i remember, go ask them how much, dont know of any other places local to you.

I got a quote from my local exhaust shop for $150 to install everything which i think is a reasonable price

just thought i let u guys know from previous experience......i used to have a stalling problem with my atom bov and bought a HKS EIDS which is designed to stop stalling from atmo bov's

so i went to UAS and all they did was solder like 4 wires to the stock ecu and too kthem about 20mins max to solder the wires and it cost me $100 which i thought the price was very steep

just sharing my experience

i used to have a stalling problem with my atom bov and bought a HKS EIDS which is designed to stop stalling from atmo bov's

You chose to have an atmo BOV so you pay the price.

so i went to UAS and all they did was solder like 4 wires to the stock ecu and too kthem about 20mins max to solder the wires and it cost me $100 which i thought the price was very steep

Most guys here are DIY freaks (including myself). DIY makes you appreciatte your Skyline owning exprience so much more. Built...not bought.

Bet you think twice now that you've spent nearly $500 (EID $160, BOV $150, Install $100) just to get a loud pssht sound. can get a FMIC these days for that price.

learn how to do it urself...your best bet is to get ur mates over for some of the action as well.

Allthough what "mr ed32" is offering is pretty damn good in comparison.

i would have done it myself but its much eaiser with a hoist and a large tool selection...

in saying that i sucessfully completed a total coilover installation including front bushes in my driveway.... easy as pie, saved alot of cash too!!!!!!!!!

Ill have a go at FMIC install :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • Just planning to have the wiring neat and hide as much as possible.
    • The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...