Jump to content
SAU Community

Recommended Posts

when i start the car up the idle drops after warm up time to bou 850 -900rpm.

after a while the revs will occasionally raise to a little above 1000rpm without touching the accelerator and if i turn the wheel when stopped the revs drop to bout 550 - 600rpm?

is this a problem because it gets relu anoying??

I have allready cleaned the acc valve so thats not the problem --> any other suggestions????

what else could be the problem??

Link to comment
https://www.sau.com.au/forums/topic/128735-idle-problems/
Share on other sites

hey man,

look in the tutorial section for "Cleaning you AAC valve"

i can almost guarantee this will fix your problem.

after time the aac valve gets full of crud and carbon build up.

spray it out with carby cleaner and put it back together.

its easy as to do, im pretty useless at diy now i can do it in like 30 mins.

cheers

Link to comment
https://www.sau.com.au/forums/topic/128735-idle-problems/#findComment-2385637
Share on other sites

hey man,

look in the tutorial section for "Cleaning you AAC valve"

i can almost guarantee this will fix your problem.

after time the aac valve gets full of crud and carbon build up.

spray it out with carby cleaner and put it back together.

its easy as to do, im pretty useless at diy now i can do it in like 30 mins.

cheers

That could be something as simple as the idle up for the a/c compressor. Is the a/c on when this happen?

Link to comment
https://www.sau.com.au/forums/topic/128735-idle-problems/#findComment-2386029
Share on other sites

as already said, the turning of the wheel is the cause of the revs dropping due to the power steering pump needing power.

when the revs go up do they stay there for a little while, or does it jump up and down? if it goes up and stays there for a while then drops, it could be the air con, as godzilla32 said.

Link to comment
https://www.sau.com.au/forums/topic/128735-idle-problems/#findComment-2390914
Share on other sites

its not meant to...it explains why the idle drops when you turn the wheel
as already said, the turning of the wheel is the cause of the revs dropping due to the power steering pump needing power.

when the revs go up do they stay there for a little while, or does it jump up and down? if it goes up and stays there for a while then drops, it could be the air con, as godzilla32 said.

as mentioned i am sitting in the car start it up and sit there - dont touch the wheel dont put my foot on the cluch dont turn the a/c on - nothing

it still idles rough - jumps between 1000 and 600 rpm and sometimes misfires

Link to comment
https://www.sau.com.au/forums/topic/128735-idle-problems/#findComment-2405510
Share on other sites

Hmm I have a similar problem (R33 gtst)

Start the car, works fine, cold, idles at 1100 or so. Warm, will idle at 900 rpm no worries. However, if im crawling at an intersection or in heavy traffic, if I move forward, then to stop just put the clutch in and stop, the revs drop not to idle like they should but to very low, like 200-500 rpm, the engine shudders abit, then jumps back upto 900rpm idle and is fine. But it keeps threatning to stall everytime it does this?

Link to comment
https://www.sau.com.au/forums/topic/128735-idle-problems/#findComment-2405760
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
    • Yes I as well would like to find out where I could get some of the seat material with the red or blue small squares in it
×
×
  • Create New...