Jump to content
SAU Community

Recommended Posts

I remember asking you about your lack of roof racks, hey. Told me about your lil cf replacements.

if you want to know where so you can ask how to REMOVE them, ill gladly buy them after you do....

Find someone with a HyperRev magazine, I'm sure someone in our group has one (or both) for the Stagea. It could quite possibly be in there.

I wanna buy them both - Nengun has them listed @ roughly $33 each, but when you look at the "Delivered" price, it's almost twice as much!!! No thanks...

Hi Guys,

I too would like info re: removal of roof 'rails' and carbon fibre inserts

or just colour coded inserts, either way it would definatley make the car look lower

and just give the stagea a better shape.

If someone has a link to a place where you can purchase please let me know!

Regards,

Wade

I couldnt see any for sale in Hyper Rev Vol 67.

All M35's come with no rails - just a raised ridge where the rails were.

A lot of the Stageas featured in Hyper Rev had the inserts but I couldnt see any listed in picture as a separate sale item. I dont read nipponese so I dont know if they just come with the full body kit.

However, the cars that had the inserts were from:

freeway-dolpin.co.jp

impul.co.jp

altia.co.jp

happy hunting...

heya guys found em!!!!!

they are on page 114 of the hyper rev vol #38 by company called G SQUARE right at bottom of page in middle.

and in same book on page 52 from AB FLUG shows a series1 with no rails on it either but it looks like those ones are just caps but cos i cant read japanese i dunno what they are priced at

  • 3 weeks later...

i have a set of the eyelids for mine same as the ones from this site.

got em on ebay for $85 aus i think just gotta get around to painting them the right colour and they will be goin on

thanks for the brochure link

very nice.

hhmmmmmm ideas.. nah, would like to make it look good, but IMO all stagea's look good.

power & handling first, then maybe in a few yrs time I'll touch up the looks. stealth is good tho.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
    • Put a hand on an injector and see if that's what the buzzing is. You might be triggering the injectors by moving off idle command.
    • Ah, should have been clearer. Currently has a flex sensor installed all good to go.    like u mentioned, I’ve only ever known the car on e85, I might hate 98, but I have to try it out first. Everyone says the -5 turbos get pretty laggy on 98 octane tho…
×
×
  • Create New...