Jump to content
SAU Community

Recommended Posts

As title states. Keep it simple; but list it out!

Im sure we all want to hear what others have planned for their lovely stags.

.................................................

me, bit stuck for cash until the bike sells, but Im sure by the end of the summer Id have fitted:

* front and rear braided brake lines, full fluid flush, along with DBA front slotted rotors.

* front caster bushes and have full wheel alignment, and add the auto oil cooler kit (got all this lying around)

* go to MV Autos for the valve body actuator exchange, with full fluid flush.

* add some sort of high flow turbo and a retune of the safc and sitc, to 1bar.

2kish should get me there.

* maybe finish off with a dvd player. sell my cdstacker and tape head unit, cost me zilch.

* alter drivers seat rail length

* 4wd controller, or some sort of fancy gadget??? :) hahaha! who knows.

but at the least I'll soon fit up the parts that I currently have, as time permits. at the end of the day it'll be under 30k and a very nice family performance car, fully sorted in all :) aspects.

.............................................

Soooo, what have you got planned to your Stagea, and to what sort of timeframe and budget?

Cheers, and best of luck to the project!

Link to comment
https://www.sau.com.au/forums/topic/128874-future-plans/
Share on other sites

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

* alter drivers seat rail length

lol 2 metres tall, eh?

plans for anna -

* paint and fit nismo side skirts and rear bar.

* door inserts and seat centres retrimmed in red velour (instead of green stuff)

* brake upgrade to either S2 or whatever fits and is bigger

* SydneyKid lowered suspension

* Scissor doors

* That is all.

PS its called anna cos anastagea (anastasia) is too long. no i didnt think of it, someone i know said it as a joke and it stuck.

pps tangles if you want an in-dash/roof mount DVD player i can get one for you at staff price, hey. Just name the brand, ill mail it. Theyre a heap cheaper at staff, like a few hundred $$. would be glad to help out

Edited by qikstagea
Link to comment
https://www.sau.com.au/forums/topic/128874-future-plans/#findComment-2384305
Share on other sites

Got my car back today from compliance. Rego on Tuesday, then the first wave of mods can start.

I have these parts ready to go on

34 GTR front end conversion

Manual gearbox conversion

Nismo short shift

34GTR wheels

tein coilovers, plus camber and caster arms

R34 GTT full set of brakes

S/S split dump, large cat and cat back exhaust

Blitz sbc ID III

S/S sill plates in door openings

Pioneer MP3

White centre gauges

Nismo clear front and side indicators

R34 GTR fuel pump

Garage Impul front seats, currently in transit

FMIC

Future mods

Power FC

Turbo

Injectors

Poncams

Z32 airflow meter

Ganador mirrors

Swaybars

Budget spent so far

More than the car cost

Link to comment
https://www.sau.com.au/forums/topic/128874-future-plans/#findComment-2384328
Share on other sites

Yea got the car on the road today. Yippe will try to take pictures tommorow too tired today. :)

wont be doing much for now. but heres the list.

Current mods:

Drop in replacement filter K&n

i have Hks dump pipes 3"

Hks front pipes 3"

direct xenon onversion HID kit 6000k

waiting for my Nismo exhaust (oval shapes) ,aerospeed cam gearsto arrive. Will fit all this parts w/o tuning first. The end of the year will get Power Fc and tune as xmas present for myself ;) .

on the way : Dolphin R speedo, .

Thinking of soon : Coilovers still debating. Would like to go Blistein coilovers SK's recommedation.

Rims Volk S1 if i remember correctly.

Future mods : short shift

CF bonnet

Complete engine swap with Hks built engine or a Nissan Rb26Z2 engine mated with a 6 speed gearbox. All will be cryogenically treated if costs allow just an option. Target 400kw at wheels depending wheter it allows for a long term realbility or not. Kill ultimitaley any HSVs or FPVs thats out there anytime. better still i let them have a head start :)

if i do the engine upgrade might have to upgrade brake cllipers or lines(braided SS), nismo twin plate clutch.

Thats all i can think of for the moment estimated costs for all this is 15-20k. Will do the mod in stages if i xan due to budget constraints :)

Link to comment
https://www.sau.com.au/forums/topic/128874-future-plans/#findComment-2384453
Share on other sites

Yea got the car on the road today. Yippe will try to take pictures tommorow too tired today. :)

wont be doing much for now. but heres the list.

Current mods:

Drop in replacement filter K&n

i have Hks dump pipes 3"

Hks front pipes 3"

direct xenon onversion HID kit 6000k

waiting for my Nismo exhaust (oval shapes) ,aerospeed cam gearsto arrive. Will fit all this parts w/o tuning first. The end of the year will get Power Fc and tune as xmas present for myself ;) .

on the way : Dolphin R speedo, .

Thinking of soon : Coilovers still debating. Would like to go Blistein coilovers SK's recommedation.

18" Rims Volk CE 28N

Future mods : short shift

K&n pod filters

CAI (if somebody can organize a group buy olease!!)

INTERCOLLER UPGRADE

CF bonnet

Complete engine swap with Hks built engine or a Nissan Rb26Z2 engine mated with a 6 speed gearbox. All will be cryogenically treated if costs allow just an option. Target 400kw at wheels ,9K REV, depending wheter it allows for a long term realbility or not. Kill ultimitaley any HSVs or FPVs thats out there anytime. better still i let them have a head start :)

if i do the engine upgrade might have to upgrade brake cllipers or lines(braided SS), nismo twin plate clutch.

Thats all i can think of for the moment estimated costs for all this is 15-20k(ECLD THE CRYOGENIC TREATMENT IS AN OPTION). Will do the mod in stages if i xan due to budget constraints :)

Edited by stasis
Link to comment
https://www.sau.com.au/forums/topic/128874-future-plans/#findComment-2384477
Share on other sites

Already have:

Adjustable coilovers

Whiteline swaybars

Adjustable camber arms

FMIC

Pod

CAI

Towbar

260RS spoiler

18" wheels

oh and i just modified the handbrake to be in the centre console.

i have a powerfc and a hi-flo turbo sitting in my garage waiting to go in with my R33 GTR gearbox & RS Four-S console.

after that i'll tidy up the interior with some boost, oil and air temp gauges that are badly needed (why did nissan release a turbo car without these?)

then a brake upgrade will be warranted, probably some R33 brembos. not too much more though, as i'm starting to save for my M35 when they become a bit more affordable (and the VQ35DD model is approved for import)

Link to comment
https://www.sau.com.au/forums/topic/128874-future-plans/#findComment-2384540
Share on other sites

Modification List:

Mongoose M80G with glass break sensor

Nissan Stagea 260RS Dash

Nissan Stagea 260RS centre console and handbrake assembly

Nissan R32 GTR gearbox with Nismo Heavy Duty Gearset and C-West short shift kit

Nissan R34 GTR pedal box

Nissan R34 GTR clutch master/slave

Nissan GTR Drive Shafts

Nissan GTR Rear Differential

Nissan GTR CV Arms and Joints

Nismo High-Volume R33 GTR fuel pump

Apexi Power FC Engine Management ECU

K&N Extreme Suction Pod Filter

Hybrid Front Mount Intercooler 800x600x80, with Custom 2.5” Piping

GFB StealthFX Blow Off Valve

Splitfire Ignition Coils

NGK Platinum Spark Plugs

Gabwagon Adjustable Coilover Suspension

Whiteline Adjustable Castor Rod Bushes

Koya Octane Hyper Wheels 18x8

Custom 3” Turbo Back Exhaust (inc 3” Dump & High Flow Catalytic Converter) with 4” Stainless Steel Tip

Pioneer DEH-P6250 head unit

Blitz Turbo Timer

DRIFT Boost Gauge

Custom Cold Air Intake Barrier & Feed

TurboTech Boost Controller

Nismo Clear Side Indicators

Aftermarket Clear Front Indicators

MTX 2 way front 6" speakers & Pioneer 2 way rear 6" speakers

Compression Test Results (18/12/2006)

1 - 138

2 - 148

3 - 137

4 - 138

5 - 136

6 - 138

To Fix:

Rewire Reverse Lights From Gearbox

Fit rear super pro camber bushes, Rear subframe alignment kit and raise to improve the ground clearance it has atm

Buy gauge holder and fit boost gauge properly, instead of zippy ties

Remove top cooler pipes and paint matte black

Remove bright blue GFB Stealth BOV and spray black

Remove bright blue Turbo Tech BC and spray black

Wishlist:

Super Pro Camber Bushes - Front - $120

Whiteline Stabaliser Bar - $230

Z32 AFM - $300

Bigger injectors - $700

Fuel pressure regulator - $100

Tomei Pon Cams or HKS step 1 Cams - $900

GT3076R - $1800 including braided lines and modified inlet

Dyno Tune - Matt Spry $800

DBA + Brembo Brakes

Rear Wing - $200

Front Bar - 260RS or DayZ

Rear Bar - Nismo

Side Skirts - Nismo

Just waiting on sale of left nut to buy all the wishlist items :ninja:

Edit: Updated all repairs and added to modlist

Link to comment
https://www.sau.com.au/forums/topic/128874-future-plans/#findComment-2384823
Share on other sites

When i got the Stagea from Chris it had:

Fujitsubo Cat Back

High Flow Turbo

Some form of aftermarket coilovers

18" Work rims

Jaycar DFA

Jaycar EBC

I have sitting here ready to go on :P :

BOS Stainless Split Dump

BOS Catco CAT

ARC Frount Mount

Thermal Flex Blue 4mm and 6mm vac hose

Davies Craig Auto Cooler (came with the car from chris but was not installed)

Stagea Air Deflector (still waiting to hear from Bass Junky like everyone else)

Before the end of the year i plan to have these mods bought and installed:

Oil cooler and relocation kit

Defi Gauges (boost, oil temp, oil pressure)

EBC (get rid of jaycar one)

Whiteline swaybars and camber and castor kit

Trust PE11 Catback (hopefully)

Personalised Plates

Anything else my parents/siblings or relatives might get me for my 21st

Hopefully one day i will get these (distant future mods ) :rofl: :

Manual Conversion (early next year if i dont buy a second car)

Power FC

New Wheels

Better brakes or stainless lines

Re-Spray

Thats about all i can think of at the moment as i do more ill update.

And if ive forgotten anything and i remember ill update ;)

Link to comment
https://www.sau.com.au/forums/topic/128874-future-plans/#findComment-2385370
Share on other sites

i will have a mv automatics valve for sale in a couple of weeks!!

or the whole auto box with it if someones interested.

im getting a rb30 bottom end built,manual conversion and 150hp nos kit run by my haltech(fed automaticly,cant trust myself with a button!!!)

re-tuned to 24psi.

should be good to go in 4 weeks!

Link to comment
https://www.sau.com.au/forums/topic/128874-future-plans/#findComment-2385401
Share on other sites

i will have a mv automatics valve for sale in a couple of weeks!!

or the whole auto box with it if someones interested.

im getting a rb30 bottom end built,manual conversion and 150hp nos kit run by my haltech(fed automaticly,cant trust myself with a button!!!)

re-tuned to 24psi.

should be good to go in 4 weeks!

...Jay ur a crazy mofo!

Link to comment
https://www.sau.com.au/forums/topic/128874-future-plans/#findComment-2385507
Share on other sites

not good on the all the tech talk but I have:

Apexi digital speed/revs thingy

SAFC thingy..

Greddy EBC...

3" Exhaust into a 5" tip...

18" ozzy racing rims

Apexi Pod filter...

Two subs

two tweeters

two amps

alpine media centre with dvd/lcd screen

custom plates

(not sure if there is anything else under the bonnet)

Wishlist

body kit

paint work touch ups

Edited by StageaGirl
Link to comment
https://www.sau.com.au/forums/topic/128874-future-plans/#findComment-2385999
Share on other sites

well mine being stock i start with an empty sheet and my wishlist starts from here.

my wishlist in no particular order

- bodykit freeway dolphin or equivalent

- rims rays g-games 99b

- fmic

- r34gtt brake upgrade

- manual conversion

- gcg hiflow turbo upgrade

- carputer

- PFC

- Sydney Kid Suspension Upgrade

- Sydneykid Swaybars

- Stereo System Upgrade

- Respray in custom colour

- Splitfire Coils

- Sure there is more but cant think of them at the moment

Link to comment
https://www.sau.com.au/forums/topic/128874-future-plans/#findComment-2386124
Share on other sites

I am looking at (over a very long time) and tight budget:

• A head unit that plays Mp3's, picks up radio stations and looks like it could have been factory issued eg: back faced not silver, brushed mental and screaming the year 2035!

• High/Low boost switch on the standard solenoid (running high at the moment and it makes a good performance difference)

• SMIC ducting, my front bar means no direct air flow to the side mount, would work well with a FMIC but I am not going that path just yet.

• Reversing camera, hooked up to the standard monitor, need to work out getting the display to work when in gear though... (goes blank once you leave park at the moment)

• A set of Splits for the front to replace factory items, self powered sub for the rear, I need bass but not OONTZ!

• Auto Oil Cooler kit, at some stage

• Split dump, high flow cat and maybe a cat back...

• R34 GTT SMIC.

• K&N Panel filter.

• S-AFC for a tune and to improve economy.

• SK suspension kit

• Full re-spray in factory Sherwood Green (Black at the mo)

• High flow if the turbo ever lets go!

I'll be doing the cheap stuff first, and some of this may never happen...

Cheers

Luke

Link to comment
https://www.sau.com.au/forums/topic/128874-future-plans/#findComment-2386359
Share on other sites

My only mods to my manual S2 so far are 19" wheels and thin rubber so I also have a pretty much blank canvas from which I would like to (in order):

Fix SatNav/TV and install DVD/MP3 player head unit

Custom plates

SK's suspension (the works)

Convert to fully injected LPG (not dual fuel) with comformable LPG tanks (including computer)

Cold air intake, Pod filter and larger intake piping

Mandrel bent hi flow exhaust

Freeway Dolphin Front Grille, EyeLiners and Wheel Arch Flares (already on order)

Brake upgrade

Intercooler upgrade

Scissor lift doors

Ultimately I would like to throw in the NEO RB26DETT and 6 speed from the R34GTR - don't know if this is possible, but it's a dream at the moment.

Oh yeah, and then sell it for another car...

Edited by thedriver
Link to comment
https://www.sau.com.au/forums/topic/128874-future-plans/#findComment-2386509
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Middle seat good for a slab of beer or Esky for a road trip. 2x kids, means 1x free seat lol.
    • So we have most the interior back in, and for the first time with one OEM speaker hooked up. The 31 is running, driving and now tunes!!! Hahaha yet another step for the sub that sat 10m under for two weeks!!! unbelievable really 👌 lots of love work and not giving up on her. Seen so many youngsters part way less, and in way better condition. I’m stubborn, thinking another problem is just a hurdle to overcome, One at a time. IMG_9277.mov
    • That is correct. I'm using a modified ABS ring and a ZF speed sensor on my rear diff for speed input. I'm running a Haltech ecu. 
    • Been busy with the newborn. We originally thought we were going to go for a third, but we're good with two lol. He's starting to actually sleep now so I've had some energy to work on the car. It's been parked away in the garage since late November due to winter.  I went ahead and redid all my head oil drains. I originally had my front and rear head drain going into the same pipe but have since split them up. I also added an Ethanol content sensor to get ready to run E85 this summer. Tossed it on my return line. Sensor sits nicely under my intake manifold.    I also have a lot of parts that came in for my rear end. I'll be swapping over to a 3.3 final drive and doing the GK teck anti squat mod. While the rear subframe is off, I'll also change every bushing. We're planning on buying another house soon with the condition that I get at a minimum a 2 door garage, so I'll wait to have more room for this. Now onto the strange things that recently happened... After changing the lower rad hose (It had been sitting in my cabinet for well over a year and was the last hose I had to replace), I let the car idle in the garage to bleed my coolant. After running for a few minutes, it started missing. Got much worst within a minute or two and then stalled and would not restart. My crank sensor decided to crap itself. No damage, no explanation, just died. I went ahead and replaced it with another ZF sensor but the heavier duty stainless model with a shield. Tossed that in and started right up. Has anyone else seen this? I hate when things fail without cause. Luckily this was a blessing in disguise... This lead me to recheck my timing. It seems I may have had a beer or two the last time I had set my TDC angle as I was off exactly 5 degrees... I miscounted a line haha. I was running 5 degrees less then commanded. It's a little embarrassing but helps explain why my dyno operator seemed to think I should be making more then 478rwkws.        
    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
×
×
  • Create New...