Jump to content
SAU Community

Lowered My Car

CATKICKER

By CATKICKER,
in Tasmania

 Share

Recommended Posts

CATKICKER Mentor

CATKICKER

Posted
Posted

I just chucked in my Bilstein height adjustable shocks and super low King springs.

All in all, pretty easy job!

Here is a pic of how it sits now. I have been waiting ages to do this and I love it!!

It is rubbing in the front so I will have a look at that today. It goes in for bodywork tomorrow so I will have any guard rolling done then.

I still have to install my other suspension gear (ajd front and rear swaybars, adj camber kits, adj caster kit and rear subframe alignment kit) and get an alignment.

Has anyone had experence with what it might be rubbing on? I am not sure that it is that guard... Might be the arm and could have to get some 5mm spacers for the front. I can't even get my little finger in between the rear tyre and the guard so that will need rolling/trimming.

Anyway, here it is. Any comments welcome.

P.S. Might be an idea to have a sticky updates section so people don't have to create a new topic for somethin like this...

loweredqd9.jpg

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/
Share on other sites
CATKICKER Mentor

CATKICKER

Posted
  • Author
Posted

Cheers guys!!

I had a look today and it is rubbing on the screws on the guard that holds the plastic inner guard on. It is also rubbing when turning on the inner guard so will have to sort it out.

I will post an update when I get the car back from the bodyshop. I am getting my front bar, bonnet, front guard, rear bar, boot lid and tail lights painted and having my boot shaved, front guards rolled and rear guards trimmed...

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2386821
Share on other sites
nizmokid Mentor

nizmokid

Posted
Posted
yea wheels are wheels to me. my best mate had dished volk rims with a $4500 price tag but they dont look much better than a cheap set. just what i think anyways. but yea car looks sweet.

its the weight of the 2 piece wheels and the build quality, sit them next to a set of lenso copys and you would just pay the extra!.....trust me I did! and they look sweet as!.....go the VOLKS! :)

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2391043
Share on other sites
grandmasterb Grand Master

grandmasterb

Posted
Posted
its the weight of the 2 piece wheels and the build quality, sit them next to a set of lenso copys and you would just pay the extra!.....trust me I did! and they look sweet as!.....go the VOLKS! :)

I can see your point and it is valid but at the end of the day you cant see the wheels when your driving and they dont make the car go any better.

Its purely cosmetic so i have never been a fan of spending big on wheels for my cars, but thats just me and my 2 cents.

Dont get me wrong they do cap off a car (like Todd's) but i can think of better things to spend money on first.

Todd the car looks great cobber, must make a big difference with the handling now!!!

What have you got planned now for the beast seeing as your always doing something to it :)

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2391525
Share on other sites
CATKICKER Mentor

CATKICKER

Posted
  • Author
Posted

Thanks B.

Well, it is in the bodyworks at the moment like I said so it will be looking spot on when it comes out!

I now have GTR injectors and the resistor pack and a Z32 AFM so I will be looking at getting a retune.

I am tossing up whether to get Dr Drift to do it again or to go aftermarket. I am about to investigate SAFC's... Can anyone tell me if I can add the new injectors and AFM and tune it up with that or would I need to go the PFC?

I am not looking at taking it to Melb to get a tune because it is going to cost too much and I may aswel spend the cash buying something I can have tuned down here! I am thinking about getting Sam to send me another chip with a map to suit the injectors and AFM and then get the A/F ratios checked on a dyno down here. If nessecary, I could always send the ratios up to him and he can adjust it best he can...

Any help or suggestions on this would be great.

I rekon there will be a little dry period in 4 weeks... I am going to be a dad :devil:

Todd

Link to comment
https://www.sau.com.au/forums/topic/129009-lowered-my-car/#findComment-2391966
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
    • pogman
      RB25DET Solid lifter conversion

      By pogman · Posted

      Poncam the world
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Unfortunately, not only is that not the case, one of the main "Selling points" of safety over comms is they clearly state in writing that there's no need to segregate safety networks from non-safety networks. It always gets intermingled with everything else on an ICS/OT network. 
    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      Hello. I have an a31 cefiro but since I am in Turkey we have a CA20S engine. I did some research. Then I found that I can swap with a ca18 but when I heard that it has the similar substructure as the s13. I thought I can swap with an sr20 because the sr20 was used with the s13. So can I easily swap the sr20 on my cefiro or is it difficult? 
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      I used to love stock take. I used to take f**k of a lot of stock. /Rodney Rude.
×
×
  • Create New...