Jump to content
SAU Community

Recommended Posts

Guys be carefull of the dump flange being thinner by making sure the wastegate arm doesn`t hit the heat cover bracket as camden mentioned. this happened to me and we could not figure out why the boost would go insane over 14lbs.Used washers to move the bracket back and the wastegate now has full movement.Big performance difference,believe me.

  • 8 months later...

hey everyone. i put a just jap racing split dump/front and x fore cat on today. just a few questions. how long will the exhaust cement smoke for? also there is what looks like 2 be an earth cable or something hanging off the car body near the cat. just wondering what it is for?? it wasnt connected. im not talkin bout the sensor its another cable. there is also one of these cables that was connected to the turbo heatshield from car body! do i need them connected? thanks in advance :(

steve

Edited by R33 S2
  • 4 years later...
  • 4 months later...

Good write up and good replies too.. Thanks... Gonna be attempting this by myself tomorrow so thought i'd better see if I needed any special tools or supplies. Instead of fitting a hi-flow at the moment i intend to just smash the guts out of my old cat.

Just did this today... very straight forward and managed to do it on my own no worries. Only thing i'll add is that it's much easier to do if you remove the top part of the heat sheild around he stock dump. I couldnt as my heat sheild bolts rounded off the heads.

  • 3 weeks later...

Did mine on the weekend and what started off as an easy install ended up taking slightly longer than expected, due to two of the bolts snapping off.

Took out the turbo and managed to get one bolt out by angle-grinding two sides for a flat surface and using an adjustable wrench to twist it out.

Make sure you either use bolt grease or WD40 to lube both the bolt and the thread hole before you put the bolts back in, otherwise 15+ year rust WILL seize the bolts!

Yeah I used hi temp anti seize greese as i do on everything now...best 10 bux i spent a few years ago now.

maybe I should invest in that too, been using bearing grease for years (I know it's not the right thing to use) hahahaha

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
    • Not required but appreciated. Super Coppermix Twin even the non-competition model feels like the pedal is noticeably heavier than stock which was pretty well judged IMO. I'll be swapping in the Nismo operating cylinder soon to see how that feels.  Personally I haven't felt anything that justifies replacing the damping loop, at least compared to more modern stuff where the clutch delay valve is actually quite noticeable.
×
×
  • Create New...