Jump to content
SAU Community

Recommended Posts

Ummm... I think he said 5w50.

Which is what I use, over filled (to the bottom of the bump on the stick) ofcourse.

I think 10w30 would break down too early in an RB turbo engine (engine gets too hot for that oil).

Sorry yes 5W50. Same thing really. Still nice and thick.

The M1 10W30 won't break down in an RB. Its fully synthetic PAO based oil so it can handle the stress without breaking a sweat. Hell Nissan's OEM oil is 7.5W30 mineral stuff so if that can do the job...

Your average RB doesnt run any hotter than any other engine, why would you say that? The turbo is water cooled anyway so the turbo isn't as hard on the oil as the days of old.

Guest 40th-edition

i run 10w30 because i get it from work.. does the job and have no probs with it at all..

the numbers given to the weights of the oils r over rated ne ways... 50 is a large cold weight and 0 is just bull shit.. just oil componeys claming crap ( i know they go through sia testing)

i run 10w30 because i get it from work.. does the job and have no probs with it at all..

the numbers given to the weights of the oils r over rated ne ways... 50 is a large cold weight and 0 is just bull shit.. just oil componeys claming crap ( i know they go through sia testing)

50 is not the cold weight. It is the measure of the high temperature viscosity.

As for the numbers being crap, it is easy to compare the difference between two grades. Just tip some out of the bottle - it will suprise you how different they are.

Essentially, to compare the 5W50 to the 10W30 they are basically the same oil, just with different viscosity modfiers. The 5W50 will be "thinner' when cold & "thicker" when hot. This is a relative thing as obviously the oil's viscosity will decrease as it gets hotter.

At the end of the day you will be marginally better off with the 5W50 because it is more stable, most noticeably when hot.

is it 5W50, or 5W30? cause 5W50 sounds like a pretty thick oil to me.

its definitley 5w-50.... but u can buy 10w-30 aswell....

when is oil at its thickest? i never drive my car for longer than 50 mins at a time, i dont go on long trips.... so what would be better for me?

im only ever doing little trips to work and stuff... never big road trips..

Beef

whether you drive for 20 mins or 5 hours, once the car car has come up to operating temp the oil temp shouldn't rise (unless you are flogging it). normal oil gets thinner as it got hot, but multigrade oils are designed so they don't thin as much.

Edited by mad082

just doing a bit of research, normally oil thins at higher temp. multi-grade oils have polymers that stop it hinning too much (so its thin when cold, and not too thin when hot). the dissadvantage with high range oils (big gap between 1st and 2nd numbers) is that they are more prone to breaking down. it is the oil that lubricates, not the additives, so the less additives, the better.

Hi Guys,

There was mention above of filling oil past the MAX to the BUMP. I was told by one mechanic that this reduces the change of oil surge and is ok but by another mechnic that filling past MAX on the dipstick can cause potential damage. Can I get some sort of common consensus on whether this is ok?

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I believe there was a similar one posted by @duggyphresh. They were re-routing their battery positive cable in the way I am also trying to achieve. Sorry, I’m new to this forum, so was a bit late to the party by a few months and so reignited the old thread, as I wanted to know how they got on with doing it.
    • Wasn't there a thread on this very subject just a few weeks ago?
    • Hi all! Looking to relocate the battery to the trunk of an R34 GTT. I want to do it using as many stock GTR components as I can (including the harness protectors from the 34 GTR that run underneath along the chassis to the engine bay). So far I’ve purchased the battery tray from a 33 GTR, as the captive weld nuts are already there just asking to be used. There is also the slight issue of now having to relocate the ABS/TC/Fuel Pump Control ECU, which in GTT’s sits right above where the battery will then sit on the tray. Has anyone already achieved this, and if you have any pics that you wouldn’t mind sharing? It would be great to see how others have done it and where you put them, as there are countless holes in the parcel shelf panel to potentially use. Just trying to get some ideas bounced around, and to help uncover any potential problems I may encounter by  my choice of location. TIA for any help!
    • Brand was ard.   I also threw a brand new battery at it and beefed up the wire from the alternator to battery and added an extra earthing point from the battery 
    • Evening all,       I'm replacing some bolts on my RB25 with probolt Australia bolts.       Does anyone know the following, m5 m6 etc 10mm 20mm etc       Coil cover   Cam covers   Plazamaman fuel rail   Front cover (timing cover)   Etc   Any help would be awesome   Or any lists anywhere
×
×
  • Create New...