Jump to content
SAU Community

Do I Need To Get A Wideband O2 Sensor Or Will 4 Wire Do?


Recommended Posts

Hey guys just wondering when it comes to tuning the power fc will i require a wideband 02 sensor or will a 4 wire one do the job.... Like this one?

http://www.tweakit.net/shop/product_info.php?products_id=81

(will it fit r33 gtst?)

or will even the stock o2 sensor do?

Any ideas comments welcome.... do not have a clue when it comes to these o2 sensors and seems that they are hard to find even on the net.

Cheers

Link to comment
Share on other sites

You need a wideband to tune the PowerFC. The "4 wire" O2 sensors are the narrowband type, just with an inbuilt heating element. Totally useless for tuning for anything but stoichiometric AFRs.

Link to comment
Share on other sites

You need a wideband to tune the PowerFC. The "4 wire" O2 sensors are the narrowband type, just with an inbuilt heating element. Totally useless for tuning for anything but stoichiometric AFRs.

ok so does this mean that everyone that has had a power fc tuned needed to get an o2 sensor b4 they could get the tune?

anyone know where i can get a wideband from?

Edited by bygrave316
Link to comment
Share on other sites

No. Noone has to get a wideband. Just take it to a tuner and he does all the tuning with his wideband. Done.

ok.... now i get it.... so they just remove yours and put in one of those ones connected to a meter.

ok so what would be the adavntage of replacing my old one with a 4 wire one? better if i was to hook up an air fuel gague or something?

Link to comment
Share on other sites

let me clarify. when they tune your car they stick one up the exhaust pipe at the back and use a portable controller and guage to read and then tune your car. they keep the stock narrowband sensor in the exhaust dump pipe. they tune the car accordingly and then remove it when done. theres no need to replace your factory narrowband one unless it is broken and doesn't return anything useful. they have a lifespan of around 50,000k's ish. so it might be worthwhile just replacing it anyway. the stock 33 gtst sensor is a generic 3 wire sensor and you can use a ford el falcon sensor as its the same type and setup.

Link to comment
Share on other sites

let me clarify. when they tune your car they stick one up the exhaust pipe at the back and use a portable controller and guage to read and then tune your car. they keep the stock narrowband sensor in the exhaust dump pipe. they tune the car accordingly and then remove it when done. theres no need to replace your factory narrowband one unless it is broken and doesn't return anything useful. they have a lifespan of around 50,000k's ish. so it might be worthwhile just replacing it anyway. the stock 33 gtst sensor is a generic 3 wire sensor and you can use a ford el falcon sensor as its the same type and setup.

ok so what is the benifit of getting a 4 wire one? or is there no benifit?

Link to comment
Share on other sites

i wouldnt think there is one at all. im not even sure it would work with the stock ecu or powerfc being a different sensor type. and dont bother getting an af guage off the stock narrowband sensor it will be pointless and given you nothing useful

Link to comment
Share on other sites

i wouldnt think there is one at all. im not even sure it would work with the stock ecu or powerfc being a different sensor type. and dont bother getting an af guage off the stock narrowband sensor it will be pointless and given you nothing useful

ok thanks for clearing it all up for me.... for a second there i was thinking i was going to have to go spend more $$$ on an o2 sensor

chears

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
    • Id like to race in the US i think alot of those track would suit me   For the s15? Youd be stuck between club sprint and the new Open Am wouldnt you depending on how much interior you have left in
×
×
  • Create New...