Jump to content
SAU Community

Recommended Posts

Hey guys just wondering when it comes to tuning the power fc will i require a wideband 02 sensor or will a 4 wire one do the job.... Like this one?

http://www.tweakit.net/shop/product_info.php?products_id=81

(will it fit r33 gtst?)

or will even the stock o2 sensor do?

Any ideas comments welcome.... do not have a clue when it comes to these o2 sensors and seems that they are hard to find even on the net.

Cheers

You need a wideband to tune the PowerFC. The "4 wire" O2 sensors are the narrowband type, just with an inbuilt heating element. Totally useless for tuning for anything but stoichiometric AFRs.

You need a wideband to tune the PowerFC. The "4 wire" O2 sensors are the narrowband type, just with an inbuilt heating element. Totally useless for tuning for anything but stoichiometric AFRs.

ok so does this mean that everyone that has had a power fc tuned needed to get an o2 sensor b4 they could get the tune?

anyone know where i can get a wideband from?

Edited by bygrave316
No. Noone has to get a wideband. Just take it to a tuner and he does all the tuning with his wideband. Done.

ok.... now i get it.... so they just remove yours and put in one of those ones connected to a meter.

ok so what would be the adavntage of replacing my old one with a 4 wire one? better if i was to hook up an air fuel gague or something?

let me clarify. when they tune your car they stick one up the exhaust pipe at the back and use a portable controller and guage to read and then tune your car. they keep the stock narrowband sensor in the exhaust dump pipe. they tune the car accordingly and then remove it when done. theres no need to replace your factory narrowband one unless it is broken and doesn't return anything useful. they have a lifespan of around 50,000k's ish. so it might be worthwhile just replacing it anyway. the stock 33 gtst sensor is a generic 3 wire sensor and you can use a ford el falcon sensor as its the same type and setup.

let me clarify. when they tune your car they stick one up the exhaust pipe at the back and use a portable controller and guage to read and then tune your car. they keep the stock narrowband sensor in the exhaust dump pipe. they tune the car accordingly and then remove it when done. theres no need to replace your factory narrowband one unless it is broken and doesn't return anything useful. they have a lifespan of around 50,000k's ish. so it might be worthwhile just replacing it anyway. the stock 33 gtst sensor is a generic 3 wire sensor and you can use a ford el falcon sensor as its the same type and setup.

ok so what is the benifit of getting a 4 wire one? or is there no benifit?

i wouldnt think there is one at all. im not even sure it would work with the stock ecu or powerfc being a different sensor type. and dont bother getting an af guage off the stock narrowband sensor it will be pointless and given you nothing useful

i wouldnt think there is one at all. im not even sure it would work with the stock ecu or powerfc being a different sensor type. and dont bother getting an af guage off the stock narrowband sensor it will be pointless and given you nothing useful

ok thanks for clearing it all up for me.... for a second there i was thinking i was going to have to go spend more $$$ on an o2 sensor

chears

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 🙂  I know what it looks like  
    • Oh, there's also the gearbox crossmember which will probably be different between the small box and the big box, and the wiring loom will probably need to be modified, because the plugs for the switches etc, will probably be different. And I think the speedo on the small box R34s is from somwhere stupid, like the diff, possibly, so you'd need to work out what needs to be done about that (assuming it is different). I think the thing you need to realise is that the front end of that yoke is a large hollow tube with splines on the inside that mates with the splines on the box's output shaft. It is a dedicated thing - not available "aftermarket". They were made to suit that box, by the car's OEM.
×
×
  • Create New...