Jump to content
SAU Community

428rwhp R33 Gtst On Stock Bottom End

bren

By bren,
in Engines & Forced Induction

 Share

Recommended Posts

bren Contributor

bren

Posted
  • Author
Posted
Very good power but I'm not sure why your car was done in "shoot 4" when it's a 6 cylinder!!

Shoot 4? Whats that then?

govich,

Its neither good nor bad, its just interesting to see if it will hold together with the original pistons and rods. :D

Busky2k Veteran

Busky2k

Posted
Posted

There are various types of Shootout modes, being Shoot4, 6 and 8. I believe the ramp rates are different. I'll try dig up the post to compare them all. All I remember was that 8 gave inflated readings compared to 6. Don't remember nothing about 4.

  • 7 months later...
bubba Grand Master

bubba

Posted
Posted (edited)
There are various types of Shootout modes, being Shoot4, 6 and 8. I believe the ramp rates are different. I'll try dig up the post to compare them all. All I remember was that 8 gave inflated readings compared to 6. Don't remember nothing about 4.

Does that mean Shoot4 would give deflated readings? maybe that is why it's reading only ~430rwhp @ 1.5bar when HypeR33 is making 410rwhp @ 1bar.. they are using the same turbos aren't they?

Either way, nice power!

Edit: OK I read it properly and they aren't using the same turbos :nyaanyaa: but I still reckon Shoot4 would be reading too low and bren is probably making closer to 500rwhp :nyaanyaa:

Edited by bubba
bren Contributor

bren

Posted
  • Author
Posted
Does that mean Shoot4 would give deflated readings? maybe that is why it's reading only ~430rwhp @ 1.5bar when HypeR33 is making 410rwhp @ 1bar.. they are using the same turbos aren't they?

Either way, nice power!

Edit: OK I read it properly and they aren't using the same turbos :laugh: but I still reckon Shoot4 would be reading too low and bren is probably making closer to 500rwhp :ermm:

That would be cool :D It runs a 128mph terminal, any idea what power that should equate to?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      The Evolution Of "night Fury"

      By Murray_Calavera · Posted

      Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • niZmO_Man
      Dumb rich kid tries modding for the first time

      By niZmO_Man · Posted

      New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • turbo76lx
      Torana Lx Gtr Hatch, Lots Of Pictures

      By turbo76lx · Posted

      Just planning to have the wiring neat and hide as much as possible.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...