Engine Conversion Help Urgently

[rb26s13]

Hello everyone me and a mate are half way thru wiring up a rb26 into my S13 and have come to a little problem

ok tracing a few thigns back.. the injectors the wires come out of the computer.. go to the injectors than head to behind the passenger side headlight.. and in the wiring diagram which i have attached ses they should run to a resistor pack and than run a single wire back tot he fuel pump relay...

now.. DOES anyone have a picture of wat this resister pack looks like.. or the part number or how much they are from nissan themselves..

this is the only thing from stopping the car goin.. can someone PLEASE help us

cheers

Wazz

[rb26s13]

here is the plug(yellow circle).. that sits behind the headlight in the silvia.. how ever up on the strut tower in the gtr.. were does wires that the red arrow points to go..

[Craved]

sounds like the resister packs that are required to run the GTR injectors in an RB20 .. so in that case you could use the injector resister from a local r31 skyline

from http://meggala.com

Edited August 9, 2006 by Craved

[BigMicky]

I have one in the shed, but just had a quick look and couldnt find it. I'll have another look tomorrow. They are a metal covered resistor with about 2 inches of wire and a plug on the end. I recon they are about $200 from nissan, but you can make your own up for <$10. There is a thread on it somewhere

[rb26s13]

were abouts is this thread to make one up

[rb26s13]

craved.. is that a pic of the gtr one or the r31 1?

Edited August 9, 2006 by rb26s13

[Craved]

thats the GTR one - as per http://www.meggala.com/injectors.htm bottom of the page

Edited August 9, 2006 by Craved

[SteveL]

.. so in that case you could use the injector resister from a local r31 skyline

R31's don't have a resistor pack, it's local spec R30's with L24E that do as well as 280ZX.

[rb26s13]

er shit ok that migh tbe a bit harder to track down then..

[SteveL]

er shit ok that migh tbe a bit harder to track down then..

I have couple of the R30 type resistor packs spare inc both halves of the plug if you get desperate.

[Craved]

that thread that was mentioned earlier

http://www.skylinesaustralia.com/forums/in...=119532&hl=

[rb26s13]

how much you wanting for one steveL and were abouts are you..