Jump to content
SAU Community

Recommended Posts

  • Replies 130
  • Created
  • Last Reply

Top Posters In This Topic

Has anyone installed the DEh-8500MP or DEH-850MP!!!!

I installed it yesterday but the outside bracket was too large to fit...does this mean i have to pull the headunit out further from the chasis so the frame can fit???

Thanks in advance

I'm guessing you mean the surround, around the outside of the unit? If you have a look, I had to redrill the factory bracket back about 10mm to get the whole surround to fit under the console surround.

Nice guide bruv! Just installed mine, how hard is it to throw in the pulsar tray?  What year Pulsar is it from? Is it a good fit? How much $$$? Ive just got an empty space there! Looks ugly as!!

Cheers!

I believe it was from the current model, it's just a standard Nissan part which they would use across all Pulsars I guess.

Has anyone installed the DEh-8500MP or DEH-850MP!!!!

I installed it yesterday but the outside bracket was too large to fit...does this mean i have to pull the headunit out further from the chasis so the frame can fit???

Thanks in advance

I had the same problem. I used a mini angle grinder to shave a few mm off each side of the surround and now fits perfectly.

nice tut - but here's what happened to me last week...

i worked out how to pull her apart myself - got it out and cut off the stocko JAP steareo connectors..

I used a test lamp to find the constant 12V and switched 12V, I then used a AA battery to locate speakers wires.

I hooked it all up using auto elect clips with crimp tool...

when I had it all up and going - the unit wouldn't light up!!! I have no idea why - all fuses are fine and there is power there (test lamped) - BTW, the colours are different to mine

  • 1 month later...

i got a a pulsar that i use for sound comps which currently has a sony XAV7W with DVD player as my head unit, kicker revolution 6 inch spilts kicker 6x9 and two 15inch kicker comp Vrs running via two Kicker 4 channel amps. Are these subs better suited to a ported/vented box or a sealed enclosure, as i listen to R&B music i like the deep sub bass style of the music to pump from the sub. WHICH SHOULD I USE?? SEND ME A MSG TO TELL ME

CHEERS

I'll post this on the forum rather than a message - the whole point of a public forum is to share knowledge (or lack thereof :thumbsup:)

With that sort of cone area, I would definitely put them in a sealed box. With two 15s you don't really need ported boxes to make big low-down bass.

If you're going for SPL though, a properly set up, ported box with give you the numbers. Keep in mind that with a ported box, because you have to tune the ports for a narrow frequency range, sound in that frequency range will be much louder than the rest of the range. If you play a sine wave from, say, 10Hz through to 150Hz, and you have your box tuned to 25Hz, the sub will be noticeably louder at 25Hz than at 50. Yes, you can 'tune' a sealed box to give better response at a given frequency range, but overall they are a much smoother, more consistent setup.

In a nutshell

Sound quality: Sealed

Volume: Ported

  • 4 weeks later...

Nice work mate, This is probably the most detailed installation guide i have seen......very neat

Ive actually got a kenwood double din in my 33 but it doesnt play CD R's

so im getting rid of it and just installing a standard cd palyer, so ill definately refer back to this guide.

Cheers!!!

  • 1 month later...

By the way the red/purple wire is luminance/dimmer. You can find the same wire on the cigarette lighter. Also im allmost positive that is the same deck (the one removed in the guide) that you will find in a 98 nissan patrol.

  • 2 weeks later...

hey,

great guide mate will use it 4 sure...

does ne1 know how 2 get the bak parcel tray out of these 33's so i can put better speakers in..just confused me and gave me a head ache...

Yep - you have to pull the back seat out (do a search, I think there is a how-to on that somewhere), and pull the grilles off the speakers and remove the child restraints. Between the speakers there are a couple of clips, my preferred method of getting these off is to slide my hand under the parcel tray carefully (palm up) and feel around until you find the clips. Once you've found them, get your fingers as close to the clip as possible and push up until it pops out. Don't push on the clip itself because it'll probably push through the weak fibreboard parcel tray. Repeat for the other clips (mine has a total of three if I remember correctly). Then just pull the parcel tray out.

  • 4 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • How much is it to re-uploster?  Well that's a "how longs a piece of string?" question !  And I answer thusly: "twice half its length! " . . . . . .  Seriously you'll have to chase multiple quotes for that one from different uphlostrerereres !  Ask around, in your area and on the forums, chase reviews and most of all see the finished product in person cause photoshop is a wonderful thing !
    • Hey everyone!!  I've noticed that whenever I do my oil changes, after putting 4L in, the oil level sits at the top mark in the dipstick. This is after letting the old oil drain for a very long time too! I've checked the oil level daily for the past few mornings. It happens every time and it's confusing because all the threads say that it should take about 4.7L (With some just adding the full 5L) My next thought is to figure out if the dipstick I have is correct so could someone please tell me the length of the RB25DET engine oil dipstick?  I've checked images of some of the genuine dipsticks, but none of them have the length in it. https://justjap.com/products/genuine-nissan-engine-oil-level-dipstick-fits-nissan-r34-skyline-c34-stagea-c35-laurel-y34-cedric-gloria-rb25de-t-neo?currency=AUD&srsltid=AfmBOortQXofgmiHVRKuIaiKuygL4k0Ewp68c3isGZk0vvKOJ7Yqf3iB However.... the engraving on the genuine ones say 05002 while mine says AA000. This makes me believe that maybe I have a wrong dipstick? I just want to confirm before I buy a new one. The car is a fresh import from Japan so I don't have details of the previous owner to ask him. Thanks in advance 🙏🏾 
    • Sport. I didn’t rebleed it cause I just removed the slave and left connected.    I will change line and slave and see how it goes.  
    • Oh and how is the rattle when foot is on the clutch ?
    • Did you get the sport or track ? From what the documentation says the uniclutch has a small amount of movement to disengage.  So your story of tricky pedal setup seems common.    Hopefully you got it bled up too, as the bite point moving around is usually either plates wearing in or air in the line.     
×
×
  • Create New...