Jump to content
SAU Community

Recommended Posts

Need to either clean or replace my air filter, atm i got a HKS mushroom one on that is really dirty, but i heard it isnt too good and i should jus scrap it and buy a new apexi style one.

Wat do u guys reckon, should i jus clean the mushroom one or buy a new apexi style one.

P.S. is there any difference b/w buying a real apexi or a fake $40 one that they sell at autobahn?

Link to comment
https://www.sau.com.au/forums/topic/129718-what-to-do-wit-air-filter/
Share on other sites

I have a hks musroom too, it was filthy. It went all crumbly when I took it out. Just replace it, costs $50 from justjap, genuine HKS too.

This is wat i am afraid of,

Should i get a real apexi one or just a $40 copy if i decide to replace it?

Just use an Apexi panel and get the stock airbox back on unless you need to run huge power. My GTR runs the same size panel as the GTSt's with 260rwkw so decent power is not a problem, it just has more air inlets to the box and that can be corrected with a with of imagination and cutting and ducting. Plus you can then run a decent front mount without defect.

Why would you clean an HKS filter element? They are a single use throw away item.

Purchase a new element for it as mentioned above, cost is around $50, and you then have a brand new filter.

Just Jap has them on their website

One thing you will notice though is that the hks pod makes a lot more noise than the apexi. Therefore, theoretically, it should flow more.

However, this would be at mega power levels. At stockish power levels, any extra flow won't give more power.

On a 1000kw car, it probably would.

One thing you will notice though is that the hks pod makes a lot more noise than the apexi. Therefore, theoretically, it should flow more.

However, this would be at mega power levels. At stockish power levels, any extra flow won't give more power.

On a 1000kw car, it probably would.

Completely wrong.

Just because it makes more noise doesn't mean it flows more. It could be increased turbulence causing the noise, or greater restriction, ie blow a certain mass(at the same temperature) of air through 2 vastly different sized orifices in the same amount of time....the smaller orifice makes much more noise due to increased turbulence and restriction so more effort or pressure is required to do the same job resulting in a less efficient delivery. Equate this to the smaller filtering surface area and the turbo dragging the air through. Also in terms of sound pressures, if noise is coming out that is causing a negative pressure wave in the intake. Bottom line, HKS filters are complete junk. There was a HKS panel in my GTR and the amount of sediment lying in the bottom of my airbox after the filter was worrying.

Correct that stock power levels would be around the same but better flow means better response. The important thing though is clean air and HKS clearly fails that criteria from both my personal experience and others' testing.

What the testing shows is the boost produced by the car with each filter, of which the Apexi and then Blitz were the best (highest) with SARD and HKS the worst, and the filtering ability for the medium used for which the Apexi performed best and the HKS about the worst. I have another similar study on my other computer that I'll post if I remember.

I don't like them because they are oiled, so can introduce oil onto the AFM element and they don't clean very well. They also state they are for race only therefore call doubts about legality for road use.

Read the above I have posted. Will your non turbo GTS-4 be pulling more power than my GTR? Stick with the stock (but modified for extra air inlets) airbox and use an Apexi filter panel and protect your engine. Would you use really crap oil in the engine? Why introduce dust that will increase wear more than some oils?

Sure it doesn't look as cool, but if you wanted to be cool you'd have a GTR or RZ Supra or late model RX-7 :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
    • You think its the AFM? I know its a common issues on R32s. I find it coincidental how this issue raised right after cleaning the fuel system. As everything except the fuel system was fine before. I tried running it with the IACV unplugged but did not notice a difference and still stalled. However, the RPM gauge is not in the cluster right now, so I will need to connect the laptop again and use Nistune to check the RPM. I will check this weekend.
×
×
  • Create New...