Jump to content
SAU Community

Advice On Buying A Dr30

thepurplepulsar
 Share

Recommended Posts

thepurplepulsar Newbie

thepurplepulsar

Posted
Posted

Hey people,

My brother is looking at getting a dr30 HT2000 RS which has a bit of work done to it including; bigger camshafts, upgraded high comp pistons, front strutt bar, R200 LSD diff, etc.. with a FJ20de.

Gererally what are these cars like handling and reliabilty wise?

Are there any common problems to look out for?

And what price range do they go for roughly?

Are aftermarket parts readily available for them, like coilovers etc..?

Before we go look at it I wanted to find out a bit of info on them, so anything you can share will be appreciated.

Thanks in advance.

tpp.

Link to comment
https://www.sau.com.au/forums/topic/129722-advice-on-buying-a-dr30/
Share on other sites
rsx84 Veteran

rsx84

Posted
Posted

firstly the r200 LSD is the standard diff....

you have to remember they are a 20+ year old car now, look for the general things first, rust in the wheel arches, window lips and the boot...

if its a 2door then check the rubber seals between the windows, major hassel to replace...

Price can very depending on year, condition, non turbo/turbo version 2/4 door, its realy what your willing to pay..

parts are a mixture of easy and very hard to get...

after market parts... engine wise not hard as you have places like www.fj20.com and datsun clubs who love the FJ.. suspension is another thing, custom or imported for coilovers $$$ or you can convert to s-13 for around 2/3s the price of imported or customs..

hope thats a help..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DraftySquash
      Help Understand GTT Boost Setup

      By DraftySquash · Posted

      Hi everyone, Apologies in advance if this feels like a topic covered multiple times. I'm only asking because some of the old topics I found are missing images now. I'm in the process of getting a manual boost controller (BC). Nothing fancy, just getting a manual one for now as I don't plan to go crazy with it and would not go over 10 PSI. My car is not jacked up on boost steroids to do crazy numbers. I want to understand the OEM setup of the boost solenoid and vacuum lines on the R34 GTT so I know what needs to be changed when I do install the BC. I sketched the current setup to the best I could see and it's on the diagram attached. If the boost controller 'Wastegate Arrow' goes from nipple 1 to 2. My understanding is that the red vacuum line's "F" connector-end should be connected to BC nipple #2? Nipple #1 is meant to have the "pressure source" so what vacuum line would that be? Is it the green vacuum line?  From what I have read here, the OEM boost solenoid is not used at this point. So that can come out and then I can just plug the nipple that usually connects to the blue vacuum line?  So would the final setup look something like this?   Thanks in advance. I don't want to already be knee-deep into pulling out vacuum lines before understanding this. I'm a noob when it comes to boost setups so trying to learn as I go.
    • GTSBoy
      Brake pad Compound suggestion

      By GTSBoy · Posted

      Initial/early bite is a feature of.....generic pads. Things that work cold. Just put Bendix Ultimate in it. If you don't like them, it's only $3.50 wasted and an hour to change them. I've been using Intima SR, and they seem to be a good performance pad. Street friendly and able to take at least a little beating.
    • corey2
      Hello from Sydney

      By corey2 · Posted

      This is my first post after registering.. I hope i can find useful resources on this forum. Great forum. 
    • Vee37
      Brake pad Compound suggestion

      By Vee37 · Posted

      As I implied in my post, I have NO idea what the were. But in case I didn't make it clear, the way they performed was brilliant; whatever the brand was. I think it was the compound that made the difference. And if they were Bendix, then sign me up, I want another set. I did drive down mount Ousley (just outside of the Gong) a few times, and they showed no untowards performance.   Its not the low dust that I am looking for NOW. At the time I needed low dust, but now I have no issues with dust but want the initial/early bite of the pads that were used. Yeah, the early cold squeal may of been due to a missing shim or such.  And to repeat, its not the low dust I am seeking, its the initial bite of the pads and increase in bite as  the warmed up during each breaking. As soon as I let off, I don't remember the breaks being extra sticky if I used them again soon after. But I also did not test that theory.   Thanks for the recommendation, But I would prefer to choose something specifically with the behaviour I described.   I assume that they didn't use the default compound off the shelf, as we discussed the dust issue at length. And the early squeal when cold, I have seen the sound is more of an issue with some pad compounds. Mostly ceramic, which also are said to produce less dust.
    • MBS206
      🚨 Need Advice! Overcharged for Engineering Report 🚨

      By MBS206 · Posted

      Well, in 2007 he must have been charging about $1800 an hour. He only looked at the car for 5 minutes. And another 4 to write the report wrong, and another minute to correct it. Mind you, this was for a car that was: Stock engine, fmic (hole in drivers guard), all alloy intake and custom air box, 3 inch turbo back exhaust, lowered, and a set of 17" Advans (255/40/17 rear and 235/45/17 front). It was nothing crazy. The blue slipper wanted the "hole in the guard" engineered. But that was because he got the shits that I wouldn't "relocate the battery from the boot, back to the factory position in the engine bay"... In an R33 GTST...     Also for emissions, E85, and don't go wild on timing. It's amazing how the closer you get ignition timing towards max torque, the last couple of degrees really throw NOx counts right up. And for the huge increase in emissions, it's only a small increase in torque.
×
×
  • Create New...