Jump to content
SAU Community

Recommended Posts

just wondering how much power rb20/25 afm's will support on a R32 gtr? I see most people use the z32 afm's but they are quite alot more expensive. Was reading an old zoom mag and they said to use the rb20/25 afm's. Im aiming for about 300 - 320awk. Will thse do the job? Also do the wires for the plugs need to be changed around or are they straight plug in?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/129803-rb26-with-rb2025-afms/
Share on other sites

plugs are the same but the flex hose will fit if you try really hards LOL. you will need a re map thought as i did this to find it was very lean on the air fuel ratio.

Cheers mate. looking at that then 2 rb20/25 is plenty for what im after. You know if the plug or wirring needs to be modified to fit to a rb26?

Interesting people have not steered ytou on the straight line!!!

You'll be able to get away without changing the AFM's

Ferni did using GT-SS i believe, and im also gonna give it a whirl on my very similar setup :P

Munna's "rule of thumb" is totally wrong in its power readings.

Z32's/Q45's read a fark load more than 250/300rwkw respectively

Although its more about airflow than power anyway

well maybe i should keep the cash and go for the tune straight away with the standard afm's. im running hks 2530's pfc and have a set of sard 700cc injectors to through in. Think i should invest in a pump then instead of afm's.

Is it possible to put an external 044 inline with the standard pump without using a surge tank?

Hi, I have R32 GTR with standard afm's and 375 kw at the rears on 18psi. Havent tried to push them any further yet though. Hope this helps. :thumbsup:

Do you have a Power FC?

What is the max voltage you see, as i regularly see 5.1volts with 310hp(230kw?) at the wheels.

Anyone else maxing there AFM at similar power level?

Do you have a Power FC?

What is the max voltage you see, as i regularly see 5.1volts with 310hp(230kw?) at the wheels.

Anyone else maxing there AFM at similar power level?

So you say you standard 26 afm's a maxing out at only 230rwk? something cant be right there. They both read that?

Do you have a Power FC?

What is the max voltage you see, as i regularly see 5.1volts with 310hp(230kw?) at the wheels.

Anyone else maxing there AFM at similar power level?

Hi, yes I do have power FC. Im not sure about the volts, I dont realy play with my FC, But Ill try to find out for you next time I drive it.

So you say you standard 26 afm's a maxing out at only 230rwk? something cant be right there. They both read that?

Yeah mate I know, I"ve read the tables too,with 400hp atw apparently the limit on std AFM(or Scoop may prove us wrong)

But they both read roughly the same,using the sw check they seem to fluctuate within a few millivolts of each other.

Could also be due to the cold weather as I never noticed them sitting that high in the summer.

It would be interesting to see other peoples power and peak voltage..

Hi guy's, first up Im not a tuner and I dont claim to know much about tuning. Im trying to learn but its all beond me, give me a chev with a holly carb and I can tinker with that just fine. Anyway my AFM are maxed out [no tuneing resolution] but they still flow the air to support the power. That is the way it has been explained to me, and that is all I can go on. What power would I need to run 10.9 @ 127.4 mph? Fair bit of wheelspin through first gear. This was my first time out with the car as we'll. :(

Hi guy's, first up Im not a tuner and I dont claim to know much about tuning. Im trying to learn but its all beond me, give me a chev with a holly carb and I can tinker with that just fine. Anyway my AFM are maxed out [no tuneing resolution] but they still flow the air to support the power. That is the way it has been explained to me, and that is all I can go on. What power would I need to run 10.9 @ 127.4 mph? Fair bit of wheelspin through first gear. This was my first time out with the car as we'll. :D

You ran a 10.9? or your asking how much power you would need? What turbos are you running?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
×
×
  • Create New...