Jump to content
SAU Community

Recommended Posts

Hi,

I was curious in to what good speaker setups would be under my budget.

Say under $500 if possible.

I don't really have a clue about the car audio side of things.

I already have 2 fusion 12" sub in a box and a fusion class d amp.

I notice that my stock speakers can't really cope being with the subs. I have to keep the dvd head deck volume down so low just to hear the music without all the bass it gives.

Just really have been trying to decide what speakers should I replace them with.

Also after getting new speakers will I need another amp?

I have no clue to what size speakers I should get because I'm worried that some don't fit.

As you can tell I have no clue to how things work in the audio side of cars.

Any advice would be great. Really after clear quality sound

Thanks

Link to comment
https://www.sau.com.au/forums/topic/129918-speakers-setup-in-a-r33/
Share on other sites

I was curious in to what good speaker setups would be under my budget.

Say under $500 if possible.

You should be looking for a set of 6" splits. A 2 channel amp to power them would be ideal, but not necessary. Just take your favourite CD down to your local car audio place and demo a few brands that fall in your price category. Pick a set that you like the sound of.

If you really want a particular brand/model recommended, i'd suggest buying a car audio mag that does a roundup test of models in your price range and go by that. At least an test session like that is more scientific than individual recommendations you're likely to get off a forum.

im getting some pioneer kevlar (yellow ones) 6x9's for the rear off ebay for $225 including postage, rrp $415 i might need some mdf spacers (jb hifi $10), il get some splits a bit down the track when i have more cash.

this was my first mod apart from getting a new deck because it would provide my car with a little more bass/mid range from the back rather then getting blasted with treble from the splits at the front or a massive sub spewing huge amounts of bass at me from behind.

...cant wait to waste more hard earnd cash on it

So the stock size speakers at the rear are 6.5"

Is there a DIY in here to install a 6x9 at the rear?

Because I was told that I cant fit 6x9s without taking that child thing whatever it is. And that its illegal to take that thing off.

Sorry have no clue.

Btw are jaycar 6.5" speakers good?

Anyone had any experience?

Btw are jaycar 6.5" speakers good?

Depending on which ones, how you mount them and how you power them.

Their yellow kevlar ones always seemed a bit cheap and nasty to me, as well as any of the other car range.

That said, I did use response 6x9s in my charade and they were quite good.

When I did the stereo in the pulsar I used the carbon fibre 6.5" woofer and found them to be quite agreeable with plenty of midbass. I had them powered off a 4x100W response amp and my ears cried "enough" before they started distorting. :thumbsup:

If you are happy with the Fusion Gear you currently have why dont you check out the new Fusion Encounter Range.

Good Bang For Buck and you would be able to score an amp with 4 speakers for under $500 at the moment,

Eg.

Encounter

En- am6004 ( encounter 4 channel amp) $269.00

en-cm65 ( encounter 6" splits) $99.00

en-fr653 9 encounter 6" 3 ways) $69.00

Saw all these products on display the other day at my Local REPCO. Gotta say, they sound awesome.

I had to ask the guy if they had botched the prices.. but no, they are right...

I guess I just have to do some shopping for speakers.

Does anyone prefer brands over another?

Say crappy brands to stay away from?

Yes, take your time. When I first auditioned speakers for my Charade I went to about 4 or 5 car audio places.. listened to everything with the same couple of CDs, and then gradually the right choice pointed itself out to me (Boston Acoustics splits).

The only thing I will say is f**k Sony Xplod in the ear. They are woeful.

I'm an audio snob though, when people say "you won't do better than Pioneer" (or Alpine, or whatever) I do my best not to laugh at them. :(

this might help you decide

front MTX 6" TX6001 its a 2 way comes with splits, the price is 330 from strathfield, i got them for 250

back Pioneer 250 Wats 75rms 6" i stole it of my friends car after his accident

Alpine S 12" sup

Rockfor amp 700watts running the sup and the front speakers

audioline amp 200watts running the back speakers- stole it of my mate as well

i can only listen to it when the volume is on half way, other wise will be just toopo loud

pictures of where i placed my tweeters and the crossovers

http://www.skylinesaustralia.com/forums/in...=127176&hl=

i think there is a d.i.y that shows you how to completely pull out the parcel shelf and replace it with mdf, the guy did a good job on it too but there is alot of f**king around involved.

as for speaker brands....MMMMMMmmmm soundstream/mb quart make some good stuff

i made up an mdf shelf lol fitted it and everything ready to go in just never got round to carpeting it might do that tomorrow ...

get yourself an amp that will give 50 ~ 75 ginuine watts rms per chanel ... a good set of splits (ive got pioneer only because they were so cheap i couldnt say no ... but go for boston acoustics man they are great sounding splits ) & just something basic for rear fill nothing flashy ... you want the front stage to sound the best...

remember its better to over power your gear than to under power it also so the bigger the amp you can get the better (this also gives you room for better gear) ... if you cant afford to get all of it get only the amp and the front splits because these are key to a good sounding system ...

things like an mdf shelf and sound deadening in a line are a good idea also ...

and if you are going to be running two amps get yourself a capacitor also jaycar one will do fine ... otherwise you'll over tax your cars power when you play your music loud your lights and shit will dim and its not good for your car ...

ok end rant

Thanks for all the help guys.

I have noticed how many responses I've read that people prefer the boston accoustics splits.

How much are they for a pair?

If they are too dear, are there any pair of splits that are very similar?

i got 4 jaycar kevlar spits front and rear in the standard pods modded them some and it sounds great i got a average 4 x50 watt head unit with the car its not super fantastic but sounds clear with good range now i am looking for some sound supression on the doors and boot for with heavy bass bits of some songs i can get some distortion :D

now i havent totaly rules out the sanyo head unit delivering clean singnal its consitint in where it distorts but not everything i expecting to distort does so i am now looking for some sound deadening

but to the point these jaycar speakers cost just on half the price of the sound storm and sound great to me and everyone else for the last 2 weeks ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...