Jump to content
SAU Community

Recommended Posts

I've got a early R32 GTR 89' model and sometimes the oil gauge will sit on zero for a little while then jump between to 1.5 or 4. The light does not come on though.

Could it be the gauge at all?

Should I pull over and turn the car off immediately when it sits on zero?

Then should I start it again and if it's back to normal keep driving?

Roughly how much does it cost to replace the oil pump (including removing the engine)?

What upgrade options do i have on the oil pump? brands/models?

I saw a 2nd hand Tomei Oil Pump for sale a little while ago for $600 are these any good?

Is there a way to install an external oil pump so that if this happens again the motor doesn't have to come out?

If i do have to take the engine out is there anything which I should consider changing which wouldn't cost too much whilst the engine is already out?

The only mods the car has is:

- 3" exhaust

- high-flow cat

- pod filters

Link to comment
https://www.sau.com.au/forums/topic/129995-r32-gtr-oil-pump-fault/
Share on other sites

I too have this issue.

Have had it with the old motor as well, the new motor was new running a different oil pump etc.

On the dyno mine always appears to be fine so I can't get it tested. :P

It has been suggested it 'may' be a sticky relief valve as when mine does it a couple of quick free rev's to 5500rpm+ has the oil pressure sitting normal again. But as it was the same on the old motor it buggers me. :( Most likely the guage and the car has done quite a few kays.

if you upgrade go for a JUN crank collar and an N1 oil pump

Great advice. You can buy a new N1 oil pump for <$500 so I'd do that rather than spend on a branded item that does the same thing. I'd also include an oil filter relocator and change every rubber hose you can find, in particular the heater hoses.

If you have the money, changing turbos and dump pipes is a lot easier with the motor out, of course.

When oil pressure senders die, do they read zero or does the gauge just become unreliable? I hope you can sort it out mate, it'd be good to hear your progress.

I had a chat with my mechanic and he said that first they'll check the oil pressure with a tool they have then the options are:

get the oil pump fixed with a standard one = estimate $2500

engine rebuild = estimate $8000

These are rough estimates. Then whilst I have the engine out I might as well upgrade a few parts whilst I'm in there and that's extra cash.

I take it in tuesday week to get the car checked out then I'll have an answer to what I have to do. In the mean time i'm driving it, but only if I really have to which might be once this week. I should fix this before the engine blows because if i just wait till the engine blows then it could do a lot of damage and may harm the block. Do you guys think it's best to get on top of this before the engine blows or just keep driving it and get a rebuild when the it does blow?

i got the same year car with the same problem. if the oil press. light comes on, kill the motor straight away. alls my problem is is the pressure switch that bolts onto the side of the oil filter assembly (stock oil cooler) $10 to $20 for a 2nd hand pressure switch from a wreckers or get a new 1. not that hard a job to replace if u can access a hoist but its a bitch to get to. my oil press. gauge sits just above 1... oil pressure has been tested and its fine.

still, a new oil pump is always a good idea considering the age of the car

maybe an aftermarket pressure gauge and switch is a good idea.

good luck

I had a chat with my mechanic and he said that first they'll check the oil pressure with a tool they have then the options are:

get the oil pump fixed with a standard one = estimate $2500

engine rebuild = estimate $8000

These are rough estimates. Then whilst I have the engine out I might as well upgrade a few parts whilst I'm in there and that's extra cash.

I'd be very surprised if it is anything other than the pressure sender unit. It's an electrical gauge that will fluctuate as the voltage varies and will drop to zero if the voltage does the same.

WIth regard to your rebuild/repair quotes, the the oil pump R+R sounds sorta close but the engine rebuild figure seems steep. Remember you don't HAVE to used forged pistons, blah blah if you aren't after a powerhouse motor. If you are happy with it as it is or the generally accepted 250awkw performance then you prob don't need too much in the way of parts, other than your oil pump. When my 89 RB26 goes the way of the buffalo I'm not going to race out for stuff I don't need. I have seen invoices for $4000 rebuilds. Yeah I know there are a lot of guys that can argue (and well) that you NEED to spend >$8000 for valve springs, rod bolts, sump extensions, etc but it's up to you. Other than a crank collar and maybe a sump baffle, do you need much more?

Anyway dude, I hope it is sorted cheaply and painlessly, I didn't mean to rant on like I did. Perhaps ask around - RB26 rebuilds are becoming relatively common so it shouldn't be too hard to touch base with someone in Vic that has done a few and could confirm the quotes.

Please make sure you post what the mechanics oil pressure gauge says :happy:

Just to let you guys know my experience.

I have a 89 R32 GTR aswell and was worried about the oil pressure needle on the dash that quite often goes to 0, but the light doesn't come on.

after some research about bad senders, I got a T-joint thingo and attached an after market oil pressure gauge on the normal sender . the after market oil pressure reads at around 25psi all the time, while the dash gauge moves around.

So if you have the same problem as me, it's most likely the factory sender.

Guess what.

All you guys are right it's the Sender unit. I'm so happy :P

I wasn't ready to pay for a rebuild and even engine removal sounds scary.

Thanks guys for your input, it made me start to question the sender unit and sure enough that was the problem. The mechanic said their pressure sensor tool showed that the oil pressure was a steady 4.5, whilst the gauge was moving all over the place.

I get my car tomorrow and I'm going for a cruise.

I think my car has been off the road more than on the road since I've owned the fantastic beast. Ah well it's worth it, because every time I jump in that car it's f'n awsome. Instead of paying all this money to fix things I should be modding the crap out of it ;). Next step I want a PowerFC.

Good to hear!

But are you going to replace the sender or get an aftermarket oil guage? since now you won't know if yuo do really have oil pressure problems......$200 might save your motor one day

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pfft. As if I'd ever point a high pressure washer at my car.
    • The nature of my commute has changed. Way back then it was traffic lights all the way, for ~28km. It sucked. When they finally stitched the expressway together I could do a good 15+km of it at a steady 80-100 with no stopping. That alone has gotten me down to flat 10s. Prior to that it was mid-high 10s. I can't remember the delta that I saw when I got the idle down. It was only ~150 rpm, because the idle speed was never terrible, but for the delta in consumption to be noticeable it would have had to have been at least 0.2-0.3 L/100km - which is not to be sneezed at when it comes for absolute free. It's only about 50L per year, but that's ~$100. A few extra pizzas is always welcome. Note that I have a record of every tank of fuel that has ever gone through my car except for a handful put in by someone else, like my mechanic. I can show you the difference between stock RB20 and tuned RB20, stock RB5Neo and tuned, winter and summer fuel blends, winter and summer fuel blends when the ambient temperature is not appropriate for the blend, working O2 sensor, blown O2 sensor, boosting f**k out of it and frightened to boost it because it is pinging, and so on. OK, I probably can't do all that now with 100% clarity - but at the time when any of those things were in event, you could see it in the records. There's 25+ years of simple tank after tank records, so you have to look for landmarks to work out approximately how old any single record is. What's really important is the meta data and that lives in my head.
    • If you're claiming the issues are not skyline specific, then either the USA is living in the 90s / early 2000s, OR you have the issue of "survivor bias". Which is you're mainly hearing and listening to those with terrible experiences, and haven't found the guys who have cars with good decent builds and no problems. It happens in AU too, that plenty of people keep having issues, and they keep going to the workshops that are known to be shit "because I read on the internet". Even worse, are those who keep posting on the internet as though they know for a fact what something is, when they've never touched/looked at said item in their life, and again are making assumptions, based on something they read, or because it's a certain way in other cars. It's even funnier when those same people debate the facts with the people who've lived and breathed this stuff for over 15 years. Example, I've had someone tell me you can't do something with a Skyline, because they read it on the internet, except I can tell they're wrong, as I did that exact thing back in 2008 with my Skyline.
    • The funniest part I saw, was someone would bitch and moan on FB about something, Andy would be the one to respond, asking for more info, if he could contact them, what the engine setup is, what their config file was, and 95% of the responses were people just going "der! It doesn't work" and Andy going "What doesn't work?" And then going "The firmware!" And they'd go around in circles as no one could ever give information, and Haltech couldn't fault things on the bench, (especially when people wouldn't give any specifics).   Many moons ago, when Andy was back at e420c stage, he reached out to me, and asked me to test different plug and play looms for him (already had an e420c in the car on his V1 PNP loom). And he kept asking me, as I was competent enough to be able to give him some specific feedback on what was/wasn't working, how to replicate the faults etc, and work through things with him. Most people are terrible at answering the questions they're asked, or being able to provide quality feedback other than "it doesn't work".
    • I say it often, none of this stuff is really Skyline-specific per se. But in general there's not a lot of people who actually know what they're doing. A lot of people charging like they do. Agile software development probably isn't the greatest idea for an engine controller.
×
×
  • Create New...