Jump to content
SAU Community

550cc Injectors Rb20det Cleaned And Flowed

samc2ltt
 Share

Recommended Posts

samc2ltt Contributor

samc2ltt

Posted
Posted

550cc injectors for rb20det performeance up grade bought them for my car for turbo upgrade then never went ahead with it. good for over 300rwkw getting hard to find.

400$

pm inquires set of 6

samc2ltt Contributor

samc2ltt

Posted
  • Author
Posted

located in melbourne, bought them of -r32nismo- i think he's pretty big on the forum he had them cleaned and flowed so ask him to confirm that or your welcome to have a look i never used them, offers are goinh to have to get a bit more serious. i forgot i also have a stock rb20det fuel rail i'll throw in.

samc2ltt Contributor

samc2ltt

Posted
  • Author
Posted
mate my offer was serious because thats all they are worth if they include plugs.

you buy a set for that much then mate i bought them for 370 my self and want around that backi already have offers above yours

samc2ltt Contributor

samc2ltt

Posted
  • Author
Posted
ive already bought a set for a customer for 300 with plugs

i sold a set of gtr injectors for 350 a few months ago and these are better flow more and don't need a resistor pack, i bought them only six months or so ago for 370, clean and flow is around 30$ each injector if you walk in off the street. they have the tooth filled down so stock plugs fit and have a fuel rail so you can drill a beez dick to fit these injectors so for around 370 $ it's good value.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...