Jump to content
SAU Community

Recommended Posts

  • Replies 278
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Yeah it was mentioned at the last Berri Car Show - tho even if it goes ahead you do realize its a 3-4 hour drive from Adelaide ;\

And a 3-4 hour drive to any decent hospital for the more serious drag entrants attending :)

on the bright side you could visit the big orange while ya there

Edited by Inline 6

Jess your kidding right

no one in there right mind will take there car up there what if you break something

not to mention its a 1/4 the drive to melboure take half a tank of juice to get there just to watch some drags screw that for a joke them if drags finish at 11 you still have a 2-3hr drive home not cool when your already tired

Well could go camping or something there make a weekend of it, but deff not as a regular thing people would go to.

could you imagine the drive home though, 50 odd drag cars cruising along hmmmz

well theyd prob have enough of it and be tired

Edited by Inline 6

Hey Jess when i was working in one of the pub i used to work in i was speaking to a family about this (would be at least 3 years ago). there is already an 1/8th mile track up there and they are trying to get it extended to a full 1/4 miletrack. The father of the family was part of the drag racing commitee up there and he said that it was going to cost around the $750,000 to get it extended.

I also have heard some VERY good information about the proposed motorsport park from the brother of one of the members of the consortium, there will be an anouncement in the not to distant furture, AND WE ARE GOING TO LIKE IT.

riverland is a joke

elaborate a lil for us :(

i heard from my sisters cousins mother that lives out there (who all happen to be the same person) that it was going to be a tractor/ride on mower draggin facility.

just messing :P 1/8 mile, how much would 4wd's spank competition there

I was just passing on info :(

It is nice to have choice and maybe SA is finally stepping in the right direction...Like his interstate brothers

See what happens..

I have traveled 8 hrs to do an event from Sydney to Shepparton just for the thrill and fun of it for a weekend away...Loved every minute of it

I have also emailed AMC again as I am trying to get information on a tentative date for AIR opening..

AND WE ARE GOING TO LIKE IT.

c'mon Dale, you tell us, make the neccesary phone calls!

i heard from my sisters cousins mother that lives out there (who all happen to be the same person) that it was going to be a tractor/ride on mower draggin facility.

lol Dan, does she play a banjo and howl at the moon too

Just because we love all new information, and no I don't have the pictures mentioned in this passage or writing lol...

Stolen from calaisturbo.com.au which stole it from some other forum I don't know.

the new billboard has been installed due to the new bridge that is being constructed as part of the northern expressway project. that road will become a dead end and the houses that are there have been purchased to be demolished, aswell as a large portion of land around the scrutineering area inside the track. the new entrance will actually be from the opposite side of the raceway with larger improved parking facilities??

i have walked the entire circuit today and snapped some pics on the phone camera. with the approval of the track manager of course who was extremely friendly and quite informative to me. we spent a good 20 mins chatting about when the likely date will be to re-open (yes the million dollar question!!) i can tell you there is a fresh 1340 feet of asphalt which looks a treat! relatively flat with no major cracks through it as was posted a few months back. however that is all that has been done! there is a step up of around 2" from the burnout pad onto the track itself and the same at the deep end. the area from the finish line on has sections missing and the return track has been completely dug up (rubble down waiting for asphalt).

it is anticipated that within the next 2-3 months work will re-commence inside the track once the expressway work is done and racing WILL return shortly after. they are sick to death of doing nothing out there and yes they all read the internet forums and know what's being said about them so action is underway.

Thanks.

Just because we love all new information, and no I don't have the pictures mentioned in this passage or writing lol...

Stolen from calaisturbo.com.au which stole it from some other forum I don't know.

the new billboard has been installed due to the new bridge that is being constructed as part of the northern expressway project. that road will become a dead end and the houses that are there have been purchased to be demolished, aswell as a large portion of land around the scrutineering area inside the track. the new entrance will actually be from the opposite side of the raceway with larger improved parking facilities??

i have walked the entire circuit today and snapped some pics on the phone camera. with the approval of the track manager of course who was extremely friendly and quite informative to me. we spent a good 20 mins chatting about when the likely date will be to re-open (yes the million dollar question!!) i can tell you there is a fresh 1340 feet of asphalt which looks a treat! relatively flat with no major cracks through it as was posted a few months back. however that is all that has been done! there is a step up of around 2" from the burnout pad onto the track itself and the same at the deep end. the area from the finish line on has sections missing and the return track has been completely dug up (rubble down waiting for asphalt).

it is anticipated that within the next 2-3 months work will re-commence inside the track once the expressway work is done and racing WILL return shortly after. they are sick to death of doing nothing out there and yes they all read the internet forums and know what's being said about them so action is underway.

Thanks.

Pictures like these by chance. Taken about a month ago by a good mate.

post-53780-1240415806_thumb.jpg

post-53780-1240415818_thumb.jpg

post-53780-1240415831_thumb.jpg

post-53780-1240415846_thumb.jpg

post-53780-1240415856_thumb.jpg

post-53780-1240415866_thumb.jpg

All this talk makes me angry, if I dont think about it then I don't get mad... Easier to just let that fat cvnt do what hes going to do and see how it goes, no point speculating.

Yeah Blob Jane will just sit on it till he drops off the perch, then it'll get sold off and turned into housing or something.

Obviously he doesn't see it as being very profitable hence the taking the time getting it ready. I would be a bit hesitant to dump s loads of money into it as well. I'm under the impression it wasn't a gold mine previously, if it was it would be finished by now. who would be saying no take ya time fixing that guys i dont want to make money. There weren't that many people there the few times I went maybe enough to make a small profit but nothing spectacular.

do you single handed hold bob lame responsible for a whole buisness shutting the doors, id say attendance was an issue along with other factors.

but i dont attend there board meetings so i wouldnt know

Edited by Inline 6

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • 2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
    • Quick side trip into the engine externals, alternator and PS were in place including tensioned belts, but the PS was dry (my guess is he had the steering rack reco-ed). Filled it up with Transmax Z but it will need more bleeding once the engine is running no doubt. BTW I've said before, I don't know what kind of soft animals you have in the city, but out here they breed the rats tough. I bet they were disappointed when they tasted synthetic ATF.... Coilpacks are Splitfires with a factory loom in reasonable condition. I didn't pull one put I bet the spark plugs are new as its a new engine
    • Onto intake pressure test. I have a Raceworks (damn brand thieves!) pressure test adapter that lets you apply pressure through a standard tyre valve and comes with a pressure gauge.....I just blocked off the other end immediately before the throttle body. Applied 30psi....and the turbo intake immediately popped off with a bang. Sorted that but it was still leaking, turns out there is a pinhole leak at the BOV adapter that I'll have to find a local place to TIG up. I'm sure it makes SFA difference with such a small leak but I want it to be right. Everything else up to the throttle body was good. Also cleaned and oiled the KNX cone filter, and this is the AFM if anyone can identify it (car runs a PowerFC)
×
×
  • Create New...