Jump to content
SAU Community

Carbon Fibre R32 Doors, Guards And Bonnet [qld]


Recommended Posts

Hi everyone, these panels have been making wall ornaments in my living room for long enough so they need to go. Rare as hens teeth, i'm not sure if there's any other sets like this in Australia. From other photos i've seen i believe the doors and vented guards are Garage Saurus, the bonnet is Shift Sports (slightly different weave but barely noticeable). Panels aren't perfect but in good condition, bonnet is very good. The main imperfections are in the painted strip at the top of the doors and guards. You could paint it to match your car or very carefully sand it back. These came off my GTR so i know they fit and work exactly the same as stock. Both doors have handles, electrics, window and one will come with some spare hinges and speaker i've got.

Weights (each approx)

Doors 17kg complete with everything (stock ~30kg)

Guards 1.2kg (GTR ~2.5kg, GTST~?)

Bonnet 7kg (GTR ~10kg, GTST ~18kg)

I've had interest from someone wanting the doors only but i'd rather keep such rare panels together so i want to sell the doors and guards together, or the whole set. I'd prefer a local buyer (could probably deliver to Bris/Gold Coast at no cost) but am open to interstate if you've got ideas on how to post carefully.

I'm chasing $3400 for doors and guards, $1400 for the bonnet, or $4000 for the lot, but am open to offers.

That's less than 1/3 of the new price! (see here and here)

Lots of pics below and more available by request.

http://www.skylinesaustralia.com/forums/in...=0#entry2409650

Please PM me or email at [email protected], phone number only to serious buyers.

Edited by neil_se
  • 3 weeks later...
  • 2 weeks later...

Are these able to be a stock fit to a 32 GTST ? and are you able to paint CF without being able to notice the difference between CF panels and normal ones ?

GTR and GTST doors are exactly the same so no problems there. The guards would be wider than GTST ones so you might need wider indicators? I'm not quite sure how the conversion works. Painted they look just the same as metal panels.

  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
×
×
  • Create New...