Resistor Pack On Rb20

[cohen20]

hi i just bought r32 gtr injectors and i was wondering if you still need the resistor packs if you have a power fc this is for a r32 rb20 thanks

[Craved]

sure do

[Cubes]

Grab a resistor pack from a R30 or 280zx.

Cheap as chips, the male 8pin plug can also be bought from your local auto shop, navara I believe the brand is make the plugs..

[cohen20]

thanks guys

[tiesto]

um quick question when you remove the cover where the resistor pack is held to by 4 screws are you able to mount the resistor pack back without the cover there so that my coilpacks are exposed? im pretty sure that the resistor pack 4 screws go into the cover so there is no holes for them if you remove it or am i wrong?

[Cubes]

I think you are confusing the injector resistor pack with the coil ignitor that is located towards the back of the motor on the coil cover. The ignitior must be secure, some have had ignitors die by letting them float around, which is quite obviously really.

The injector resistor pack is a rectangle shinny silver thing that holds 6 ceramic resistors, one + feed enters that splits in to 6 wires that then run to each injector.

The resistor pack is held by 2 screws.

[tiesto]

ok yes i meant the coil ignitor one, i've seen pictures of rb20det engine bays with the coil cover removed and the ignitor still there, but how is it securely mounted, or possibly its not even mounted just hanging, always wanted to know

[Cubes]

Grab some sheet metal and make some thing up.

[GTR-Ben]

You can position it between the covers and screw one bolt into one of the holes that secures the centre cover. It's only light and holds well like this.