Jump to content
SAU Community

External Wastegate Possible On Low Mount Manifold?

SLYLNE

By SLYLNE,
in Engines & Forced Induction

 Share

Recommended Posts

SLYLNE Rising Star

SLYLNE

Posted
Posted

Hi ppl,

Im not quite sure about this, but is it possible to fit a external waste gate on a low mount manifold?

I know its possible on a high mount, but i dont want any more cop hassles than i already do.

is there any way around it?

any help would be great.

thanks.

Faid Collaborator

Faid

Posted
Posted

it is possible without a doubt, but i think youd have to have a special manifold casted or made up to do so. why wouldnt it be possible, the only way to go here is custom, from your car ( i thaught i read that you have a R33 GTST) id take the example of the GTR 700, which is rubnning a low mount twin turbo setup with external gates, so i think a custom manifold would so the job, i dont know what the price is of these custom setups over there, but i can have em made at my job. ( i litteray live on the other side of the world assuming you live in australia. make sure they use SUS 304 stainless steel and they have to MIG weld it, and oh yea for better resuts the individual header pipes need to be uniform in thickness and the need to be as smooth as possible on the inside

ECR033 Mentor

ECR033

Posted
Posted
I think HKS have one, or you can pay to have one made

I have a HKS low mount manifold with a Turbonetics 40mm external wastegate...

No shiny pipes for me, although admittedly the wastegate isn't exactly hard to find if you know what you're looking for :huh:

gallery_10992_1212_44783.jpg

gallery_10992_1212_36818.jpg

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Watermouse
      Stock rb25det neo questions

      By Watermouse · Posted

      GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • PranK
      Happy New Year!

      By PranK · Posted

      Happy new year!
    • eli995
      R32 gtr hood latch support/lock part number search

      By eli995 · Posted

      Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • Millerman
      Jdm toll card reader talky box

      By Millerman · Posted

      I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
×
×
  • Create New...