Jump to content
SAU Community

Recommended Posts

well again, IN THIS STATE, it doesn't matter if it's stock or not, there's a set of rules and guidelines that you have to abide by to do it.

It has to be viewable from 45 degrees on either side of the centre of the car, 5m away.

I believe those are the measurements, I could be wrong...

Always been illegal. Been pulled over before the kit and cop said i could lose 3 points for it. I know people that have been done for it too. + you get a fine.
well again, IN THIS STATE, it doesn't matter if it's stock or not, there's a set of rules and guidelines that you have to abide by to do it.

It has to be viewable from 45 degrees on either side of the centre of the car, 5m away.

I believe those are the measurements, I could be wrong...

Kris, this appies in Vic. ADR rules if im not mistaken. have a look on vicroads website. you should be able to find it. sidemount that mofo

"Niceay?" - Not really. LOL

Looks clean mate, but definitely need some new rims, plus perhaps you should also tint your car darker too.

tint my car darker? what are u talking about... if ur talking about the windows they are just darker then legal,

also the quote niceay? not really... is pretty lame what car do u drive put it up

well again, IN THIS STATE, it doesn't matter if it's stock or not, there's a set of rules and guidelines that you have to abide by to do it.

It has to be viewable from 45 degrees on either side of the centre of the car, 5m away.

I believe those are the measurements, I could be wrong...

Well obviously im in victoria and i know the rules... your 45 degrees one is correct. But here it MUST be foward facing parrerel to the chasis or some shit (in victoria). I HAVE had it to the side. Everytime i got pulled over it was mentioned. After been pulled over after driving it for 100m i think ill keep it in the middle... even though it does look much tougher on the side.

Well obviously im in victoria and i know the rules... your 45 degrees one is correct. But here it MUST be foward facing parrerel to the chasis or some shit (in victoria). I HAVE had it to the side. Everytime i got pulled over it was mentioned. After been pulled over after driving it for 100m i think ill keep it in the middle... even though it does look much tougher on the side.

im pretty sure its www.justjap.com that sell a side mound bracket u can screw into ur bar, :D problem solved

Well obviously im in victoria and i know the rules... your 45 degrees one is correct. But here it MUST be foward facing parrerel to the chasis or some shit (in victoria). I HAVE had it to the side. Everytime i got pulled over it was mentioned. After been pulled over after driving it for 100m i think ill keep it in the middle... even though it does look much tougher on the side.

I never let a street cop be the be all and end all on road rules cause all my run ins with them show that they don't know shit...

Mine has been mentioned by police pretty much every time I've been pulled up as well, but my point is, SOME TIMES, THE POLICE GET IT WRONG!

105.11 Visually inspect the front and rear number plates.

Reasons for rejection

f) Characters on the number plate are not clearly visible from a

distance of 20 metres at any point within an arc of 45 degrees from

the surface of the number plate above or to either side of the vehicle

Here. I tried to find the rules on vicroads but the search is pretty crappy... sorry man >_< might be under the RWC guidelines.

My old wheels make it look awesome mate!

Getting my guards rolled this weekend so I'll be rocking the same set of very fresh wheels as you :D

ur old rims make my car!!! I had to roll the guards aswell. I still goto put spacers on and lower

Did u powder coat the centers or urs? Im not sure if i can be bothered...i was planing on powder coating the rears white but not sure

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • At this point I'm just 'hoping' it's the turbo seals. I did speak to someone who said it's normal for these turbos to have a bit of axial play? Not gonna lie I've never checked a turbo for axial play before but you could hear it tapping a bit as I moved it back and forth. Surely that's too much? My theory is (could be completely wrong), bad axial play, worn bearings, bad seals, oil into dump/compressor side, burns in exhaust = blue smoke. On a timing belt related note, my crank pulley was missing that front plate that sits in front of the timing belt. It's that metal round plate. It did have the rear one, and the woodruff keys are in the crank which was nice. Can anyone confirm if the NEO det engine has a front plate, im sure it would to protect the front of the timing belt or something. Water pumps...the pump I got was an NPW (yes grill me if I should've got a genuine one lol). It has a smooth mating surface, kit came with a pretty pathetic looking paper gasket. Do I need to use any RTV or just trust the gasket will work because its a smooth mating surface? Cheers legends have a good Easter break!
    • Cheers man, I thought the same.   Bit of an update on it all. It was definitely blue smoke, not grey after all. It didn't really smell oily but it was blue after all. Also puffing just the smallest amount on idle with no throttle.   I ended up pulling the intake and exhaust off and there was around 3mm of axial play on the turbo shaft. So I figured we'll that's buggered and sent it off to get hi-flowed at hypergear. Haven't got it back yet.   I haven't compression tested it yet. Had a look in the cylinder and cylinder 1 spark plug, looked a bit sooty but not oily. Then I've just started doing my timing belt because it's age is unknown.
    • In that case it is probably stock. It lives in the navigator side footwell behind the plastic trim just in front of the a pillar.
    • Good question, I don't really know tbh...I'm pretty stock thought, where could I check this?
    • This. I'm confused by the whole discussion. The only reason you would have a car with e85 only if it was track use and you only ever used e85. All other use cases you add a flex fuel sensor, do the flex tune (you only need to do a couple of % and then interpolate the rest) and then you put whatever the hell you feel like including a mix in the tank and it just works. Want a long drive? fill with 98 Want max zoom? fill with e85 Got a half tank of 98 then find e85 somewhere? Throw it in.
×
×
  • Create New...