Jump to content
SAU Community

Recommended Posts

We have way too many sports cars at the moment... those two skylines, which were moved to fit the new supra next to the old supra, and I'm looking at another soon...

And I have to move in like 4 weeks! :/

Nice 33 Simon,

By the way...completely off topic, but do you still get good air flow to your cooler without the front bar cut out like i've seen on others?

cheers m8

i dont really see any adverse effects from not cutting the bar, and i would rather leave the bar as is, just think it looks better?

i would ideally like to fit a longer narrower cooler to improve things, but i have yet to attack that idea, summer job, and see what i can fit?

also thinking about water spray on cooler and maybe nitrous spray bar?

i have a complete with extra bits kit from the wizards of nos, which i took off my 220 turbo, with two 11lb shiny polished bottles :)

where the hell to put em is the next issue lol

cheers m8

i dont really see any adverse effects from not cutting the bar, and i would rather leave the bar as is, just think it looks better?

i would ideally like to fit a longer narrower cooler to improve things, but i have yet to attack that idea, summer job, and see what i can fit?

Something like this.

post-47546-1241090750_thumb.jpg

I was thinking about buying this and just buy a piping kit.

Are you running standard turbo? Any power increase/lag?

Something like this.

post-47546-1241090750_thumb.jpg

I was thinking about buying this and just buy a piping kit.

Are you running standard turbo? Any power increase/lag?

that looks like what i was considering......., no running a hks gt2535 (i think thats the number) bit laggier than std, but 1 bar at 3k rpm, allegedly running 350 bhp? i think its less tho, gotta get it rollered at some point to see :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...