Jump to content
SAU Community

260rs On Jspec

jasevr4

By jasevr4,
in Four Door Family & Wagoneers

 Share

Recommended Posts

jasevr4 Mentor

jasevr4

Posted
  • Author
Posted

Well I've been pestering this old guy to buy his Datto 1600 for about 5 years now, and it looks like his finally ready to sell up...

I'm only 21 - $27k is a decent house deposit.

Thats just my way of thinking at the moment anyway. Things could change though! :lol:

stasis Mentor

stasis

Posted
Posted
jasevr4 - Im 19.... :)

stasis - i will buy when I am ready, at the moment it is more important for me invest money in myself and setup my business well and true. I have big goal and these big goals will pay off very big time.

good on you

:)

CruiseLiner Mentor

CruiseLiner

Posted
Posted (edited)

just remember every single car from japan seems to have the mystery 70 000km on the clock and thats r32's and all, so id say more like 150k for them ones, and so one with 135 000km would be alot more i'd imagine unless this is actually genuine km's which i wouldnt put money on :)

no im not having a go at jspec or anything im just warning people the km's mean bugger all as u cant trust them anyway. my stagea had 120 000km on it when i bought it and its absolutely spotless while ive seen r32's that a absolute shitheaps with 60 000km. just the risk u gotta take i suppose :)

personally i wouldnt touch a rb26 with a 10 foot pole unless it was a fresh one as alex has said. dont expect to run 450hp and it last for years like some people want u to beleive. 9 out of 10 die going by people on these forums, they are high revving engines and bearings/rings/ringlands etc dont last when high revving all day like in a rb25 with lower rpm limit. plus im sure almost all rb26s have been flogged around as people wouldnt buy them otherwise.

thats my useless 2c worth

Edited by CruiseLiner
funkymonkey Grand Master

funkymonkey

Posted
Posted
im just warning people the km's mean bugger all as u cant trust them anyway. my stagea had 120 000km on it when i bought it and its absolutely spotless while ive seen r32's that a absolute shitheaps with 60 000km. just the risk u gotta take i suppose :)
agreed... never go by mileage... i dunno, i've noticed int he stag community that the 100,000km mark seems to be a holy grail... a lot of people look at a car, think its a bargain, and suddenly change their minds when they see the mileage. Surely major service on a stag at 100,000km is the same as on a skyline? What's putting people off?
qikstagea Mentor

qikstagea

Posted
Posted
plus im sure almost all rb26s have been flogged around as people wouldnt buy them otherwise.

thats my useless 2c worth

Useless? I wouldve paid at LEAST 15c for that bad boy. that quote makes PERFECT sense. GTRs and Autechs are the sort of car you'd only buy if you really want a performer. if you are just going to cruise around, buy something with a 25. If you want a quick car that responds well to a heavy foot, youd get a car with teh 26.

You may find a car in decent nic, maybe even low kms (maybe even GENUINE low kms) but id say they would be a much rougher and harder driven amount of kms than youd find in a 25det stagea. they are a family car over there, whereas the guys that buy performance cars in japan generally use them for just that - performance.

stasis Mentor

stasis

Posted
Posted (edited)

All in all i think that if we buy through Jspecs normally they will tell you wheter theres a need to ask an independant mech to inspect the car. I was abit scared at first when i bought the car before i actually see the car with my onw eyes. But it was good.

im with qikstagea when you buy 260rss dont expect that the previous owner to treat it like a family car. But i guess with all the floggin at stuff it is acceptable for the engine provided that you dont rev it up while the engine is cold and on time service which mine has all the records.

Its really hard oohhh the general rule is looking at the Kms. true but you dont know what type of conditions that the car was travelling at for those amount of Kms it had travelled. To be safe you can have a mech to inspect the car first to put ypu mind at ease first.

that just my opinion though i could be wrong.

Edited by stasis
  • 3 years later...
wagzilla Contributor

wagzilla

Posted
Posted
All in all i think that if we buy through Jspecs normally they will tell you wheter theres a need to ask an independant mech to inspect the car. I was abit scared at first when i bought the car before i actually see the car with my onw eyes. But it was good.

im with qikstagea when you buy 260rss dont expect that the previous owner to treat it like a family car. But i guess with all the floggin at stuff it is acceptable for the engine provided that you dont rev it up while the engine is cold and on time service which mine has all the records.

Its really hard oohhh the general rule is looking at the Kms. true but you dont know what type of conditions that the car was travelling at for those amount of Kms it had travelled. To be safe you can have a mech to inspect the car first to put ypu mind at ease first.

that just my opinion though i could be wrong.

Hi guy's any chance anyone remember this 260rs I think I'm the guy that bought it......cheers...James

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jtha7
      Replacing turbo water line - any recommendations or advice?

      By jtha7 · Posted

      Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • MBS206
      RB20DE NEO smallbox clutch.

      By MBS206 · Posted

      From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...