Jump to content
SAU Community

Recommended Posts

For sale: Brand New Brembo Brakes

Item Condition: Brand New Never Used

Price and price conditions: TAKING OFFERS

Extra Info: DISC SHOWN BELOW ARE SOLD, TAKING OFFERS ON THE CALLIPERS ONLY

Pictures:

IMG_0346.jpg

IMG_0347.jpg

Contact Details: PM Only

Location: Brisbane

Delivery & Conditions of Delivery: Whatever

Edited by mad13b
Link to comment
https://www.sau.com.au/forums/topic/130684-fs-big-brembo-brakes/
Share on other sites

For sale: Brand New Brembo Brakes and Discs to suit.

Item Condition: Brand New Never Used, Discs are second hand and with no measurable wear.

Price and price conditions: $2200 PRICE DROP $2000

Extra Info: The Disc's are Ap Monster Bell Discs, They measure up at 315mmx 28mm. They will need hats to suit your application. The brembo's are brand new never used with semi-metalic pads. The pads along cost me $450 and the Discs came in at $500. The Brembo's come new at $3200 for a pair. You do the maths!

These are the biggest brakes you can fit under 17 Inch Wheels! :shock:

Re-check your claims please.

STANDARD R33 GTR rotors and STANDARD GTR Brembo's are 324mm x 30mm and easily fit in 95% of 17" rims.

I have seen 345mm rotors fit inside 17" rims, but rim choice is very limited.

Re-check your claims please.

STANDARD R33 GTR rotors and STANDARD GTR Brembo's are 324mm x 30mm and easily fit in 95% of 17" rims.

I have seen 345mm rotors fit inside 17" rims, but rim choice is very limited.

True,

I've seen bigger too, i know these callipers take upto 330mm that said these just fit under my 17" Simmons.

Different callipers have different dimensions, these callipers have approx, 25-30 mm from disc edge to edge of calliper which limits the disc size. Wilwood for example make callipers which have a 7mm from disc egde. And you can use huge discs with them.

Have a closer look at the pics, exspecially the pics with the calliper on the disc. Notice the distance off the disc the calliper sits at. This is what i'm talking about.

Braking power refers to the combination of the combined size of the calliper 'pots', the radius at which they act at, effective capacity of the disc to disperse heat and the compound of the disc and pads, and a couple more factors such as pedal ratio, booster size etc etc. Not just disc size which is a common misconception.

When stating "Bigest brakes you can use on a 17" wheel" the combination of the above factors are what i was refering too, perhaps i should have been clearer.

The discs on this setup are used to their maximum potential, the full cross area of the pad is utilized with little or close to no wasted disc, Lower rotational mass etc. Alluminum hats will certainly add to this.

Edited by mad13b

Not too sure what you are trying to say, but i still stay with my previous comments.

These calipers look very similar to a R33 GTR Brembo, in size, style and appearance (not colour, unless painted). So to say they are the biggest, is a fulse announcement.

Have you compaired these brakes to a R33 GTR Brembo package?

Not too sure what you are trying to say, but i still stay with my previous comments.

These calipers look very similar to a R33 GTR Brembo, in size, style and appearance (not colour, unless painted). So to say they are the biggest, is a fulse announcement.

Have you compaired these brakes to a R33 GTR Brembo package?

Yeah the front piston is 4mm larger than that of the r33 gtr brembo package.

Basically above i was tring to say in a roundabout way that with these callipers these are the bigest discs i could fit under a 17" rim. It may be possible to squeeze 324mm out of it but you'ld hav to check with whatever rim your using etc. etc. As these callipers are larger than stock r33 gtr ones by quite a bit.

Cheers

what car are they 'bolt on' for?

because they are lug mount, they might be very difficult to fit to a skyline without buggering around with brackets...

if they were radial mount it would be heaps easier

what car are they 'bolt on' for?

because they are lug mount, they might be very difficult to fit to a skyline without buggering around with brackets...

if they were radial mount it would be heaps easier

pls answer above question so we know if they are bolt on or not...

pls answer above question so we know if they are bolt on or not...

Must have missed your question, No idea what they are off, purchasd for a custom job and the discs/piston sizing. Have been told they are the same as the porches but the pistion sizes are larger.

So no idea, yes radial mount would be easier for you guys with skylines but a set of custom brackets cost bugger all, 2-300 at most if that.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
    • @KinkstaahKrinkle paint the "silver" alloy, not the red filter frame Engine bay heat won't be a issue worth worrying about as the silver alloy blocks it off on 3 sides, as for the top, the bonnet seals most of it and the big OEM CAI intake snorkel is still fitted in its original position  I will head into Clark's Rubber when I have some time to grab some pinch weld to tidy up the alloy after I paint it As for performance, I honestly wasn't expecting any, the only reason I got it is because the intake noise sounds cool to my old ears when I'm feeding it the beans Sometimes it's the silly things you do in in life that gives the most fun, and I do love anything that makes cool car noises In other news: I survived 4 nights at sea with Jackie not throwing me over board, holidays are continuing now as we are currently chilling at the Beachcomber in Toukley, after taking the coast roads from Sydney in the MX5, top down all the way, Toukley is where I spent a good deal of my youth holidaying during the summer months, there's lots of reminiscing going on,  and lots of beaches and old houses to visit Next on the list is to head to Batemans Bay for a few days, but we will take the Commodore out to stretch its legs, then Commodore hasn't really moved for months
    • There’s probably people who’d like to do it and then when it comes to putting their hands in their pockets they’ll all disappear into the shadows 
×
×
  • Create New...