Jump to content
SAU Community

Recommended Posts

Sounds more like that it is spinning when it shouldn't. This is because it's a viscous clutch fan, and when it fails, it locks up.

If you start the car when it is dead cold, it should spin up and then come off after a minute.

Or, to test whether it has seized or not, tomorrow morning, open the hood, and try to spin the fan with your hand (car off!). If it resists a LOT, then it's seized and you need to buy a new one. Changing it is pretty easy though (4 bolts), and if you wiggle it, just a little bit, (hehe) it should slide past the radiator shroud.

Sounds more like that it is spinning when it shouldn't. This is because it's a viscous clutch fan, and when it fails, it locks up.

If you start the car when it is dead cold, it should spin up and then come off after a minute.

Or, to test whether it has seized or not, tomorrow morning, open the hood, and try to spin the fan with your hand (car off!). If it resists a LOT, then it's seized and you need to buy a new one. Changing it is pretty easy though (4 bolts), and if you wiggle it, just a little bit, (hehe) it should slide past the radiator shroud.

can it still eb driven until my new fan arrives? and where to get a new one? how much?

Edited by Suspense

You can drive it as much as you like. It will make a lot of noise from the air being pushed, and it will still cool everything (even when it DOESN'T need it).

New fan I think is under $200... Call Nissan?

the clutch on it has FAILED dude. this means what it does next is anybody's guess. which means it may loosen at any moment and start free spinning, i.e. not cool your motor.

if you're going to spend $200 on a clutch fan, why not upgrade to an electric thermofan for a bit more. i'll be doing that mod soon.

Don't panic....... Pull the fan & clutch off, if you're in Sydney, go see the boys at Just Jap in Kirrawee or SSS in Giraween ( or the like ) and grab a good condition second hand clutch off them !! Just make sure it bolts up to YOUR fan and looks the same ( but better than yours ) and away you go !!!

I was a bit suss on my clutch ( fan ) and scored an almost new clutch off an R34 RB25NEO that fit perfectly in my R32 RB20DET fan and works great !!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know it's been YEARS but hunting down that trunk lip spoiler!
    • Absolutely nothing wrong with a Profec or similar. He's on a Nistune, so external boost control is a better option anyway.  
    • I would not replace the gauges. A well setup tune should never require any of that. I'm of the opinion that if you can't safely hand over a car to your parents to drive it's not fit for purpose and more engineering work should be done. Honestly I'm not a fan of external boost controller boxes either but if you have to you can shove the controller into the glovebox or something once it's set up. Tee it off the OEM MAP sensor. Also you probably want to put a two pin plug on the new solenoid, bolting it to the OEM location works. Just separate the wastegate line and compressor outlet so it will work on a 3 port solenoid, kevboost was walked through how to do this on an RB26, same idea just different locations on an RB25. You may have to remove the restrictor in the OEM hoses if they're still in there. 
    • Yep, it's why in Australia we never brought in the 1 child policy like China.  China can't afford to use the shit they make in their own country as it's too much to risk having only one child...  Or maybe that's how they test their shit before they send it to Australia - they use the second kid that families had when they weren't supposed to as the tester?  They weren't supposed to exist in the first place so no loss if they succumb to a work place incident?  🤣
    • It's also the reason neither Duncan or I can own a car rotisserie
×
×
  • Create New...