Jump to content
SAU Community

Recommended Posts

nissan never released any stock figures at the wheels, only at the flywheel

based on what i have seen on SAU from stock R32's including my own, i would say:

auto - 100rwkw

manual - 110rwkw

gains from just a cat-back and nothing else? probably about 10-15rwkw...

  • Like 1

Yeah, they prodused 158kw at the flywheel i think it was, theres a formula to give an approx of what that would be at the wheels, but the above figures seem pretty accurate i would say.

If you are interested in a power increase, i would seriously consider a turbo back exhast with high flowed cat as opposed to a cat back, which is not that likely to give much of a performance increase.

you will definately see a power increase with a cat-back.. as i said 10-15rwkw

obviously you will see an even biger increase if you do the whole exhaust (dump/front pipe, cat, cat-back) - more like 20-25rwkw..

but everyone has a budget do whatever fits into that budget!

but those figures i quoted were pretty accurate i think for a stock gtst and i mean out of the factory style...

thanks thirtytwo... that figure is kW at the flywheel

as the power makes its way though the drivetrain, energy in the form of movement (kinetic energy) is lost as heat and noise. Thus by the time is makes it to the tyres to move the car forward, much of the energy has been lost.

that is what is measured by a dynanometer.. power at the wheels... which is 100rwkw auto and 110rwkw manual

My R32 GTS-T has just a 3 inch HKS cat back and pod filter and returned 177.6rwhp. I'm sure you could expect similar results with the Trust 3 inch cat back and similar intake. See link for my original thread (including dyno printout).

http://www.skylinesaustralia.com/forums/in...t&p=1611204

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...