Jump to content
SAU Community

Recommended Posts

Hi all,

need some help or ideas.

i have a 95 r33 gtr that the 4wd system isnt working.

as soon as u start the car the 4wd light illuminates.

i have swapped attessa computer, g sensor all 4 abs sensors and we still only have 2wd.

i can hear the pumps at the rear pumping at start up, but we have a problem somewhere.

any ideas would be apreciated.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/131185-need-help-gtr-4wd-problem/
Share on other sites

might seem stupid, but you've checked for hydraulic leaks, the fuse, and bled the attessa system?

P.S: that pumping noise is probly fuel pump anyway, dunno how loud attessa pump is compared to fuel pump, especially at atsrt up

Edited by VB-
might seem stupid, but you've checked for hydraulic leaks, the fuse, and bled the attessa system?

P.S: that pumping noise is probly fuel pump anyway, dunno how loud attessa pump is compared to fuel pump, especially at atsrt up

hi yep checked the obvious stuff, from my understanding the only things that can cause a issue are hydraulic pressure or an elec fault.

attessa is bled, 33 doesnt have a fuse like r32, no leaks.

the pumps prime as soon as u turn the ignition and they are very audilble on the gtr.

thanks anyway

... 33 doesnt have a fuse like r32, ...
Pretty certain they do, down by your right knee, just like a 32.

Fluid in the reservoir is at the right level (checked with IGN = ON)?

TPS connection is working?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Because that’s not what any of them are building these heads or blocks for. It’s to hold over over 1000hp at the wheels without breaking and none of that stuff is required to make power 
    • Dort sounds above 3k rpm are dorty 🤣 I might krinkle black the alloy 🤔
    • It makes you wonder, all these people starting to make a billet replacement head, I wonder if any have thought about trying to adapt tech from newer engines into them. You're already at the full design stage to make a billet head... Why not really spice it up and had some more modern tech into the mix too...
    • Connect all the plumbing up properly. The actual worst part about having the turbo unable to actually build boost, is you can and likely would over soon the turbo if you drove the car (free rev while stationary isnt likely to manage it).   If you do have an air leak as Duncan suggested, you'll have a bad time as the AFM will be saying different to reality.   As you have had the engine out, I'd go over all electrical connections again. If you have a consult cable, plug it in, and see what the ECU thinks is going on. Did you touch the timing belt? If so, double check your timing on the gears is correct AND put a timing light on it while it's idling and see what ignition setting you have. Is the AFM you've installed the one that was in the car previously? You said you replaced seals, what seals exactly? What have you had apart?   From memory when I had my RB25DET with factory throttle, there was two plugs the TPS plug on the loom could go to. One would leave the car running like shit, the other made it work, I think one plug on the TPS area was for something else (an option). It's too many years since I saw that part of the loom to remember properly though.   Is the car idling smooth (as smooth as an RB can)? Does it smell fuelled up?   I have a feeling either timing in timing belt is off, or a sensor isn't right.
    • Theres still skid pan and motokhana days up in QLD at least that are $100 or less. The ones that are ran as "driver training" less so, they're expensive, but just normal skid pan days like SAU ran are still low cost. And thats one of the places I learned to be a lariken, purely by asking for passenger rides, and how people were doing crazy things. Reese gave me plenty of pointers back in the day for skid pan! And yes Duncan, I will never forget your pointers for track work. Especially after Neil got out saying "I am NEVER getting in the car with him again!" 😛
×
×
  • Create New...