Jump to content
SAU Community

Recommended Posts

  • 2 months later...

after trying all the 98+ fuels for a long time now, the best one i always thought was BP Ultimate (although there wasnt a massive diff), However recently i been using Vortex 98 and out of all the fuels, i think personally vortex 98 stands out, even more than the Shell 100 RON fuel. This is just my opinion. Fuel economy wise, well how do u ever measure fuel economy? unless you never gun the thing, and lets face it, not many of us would go through a full tank of fuel without pushing it here and there so its really hard to measure fuel economy.

most skyline drivers will need to do an ECU reset and run-in (~1000kms) to notice any differences between fuels

i've been running optimax since i bought my car, and when the fuel prices plummeted i switched up to optimax extreme (v-power racing) and noticed a little increase in response.

I've reset my ECU, just coming up to the optimal run-in mileage now and my car goes like a burnt cat. Stupid amount of response and acceleration, hardly even notice it's an NA :happy:

Afaik the 100 octane + 5% ethanol blend is what the japs use and what the skylines are supposed to run on, so that's what's staying in my car from now on, i love it.

yeah i ran the ultimate in my n15 with rnn14 and it was getting about 350-400 per tank ive had the v power racing in for a monthish now and i get 450-500 and i can def notice its alot smoother on accelerating and has bit more punch but nothing over the moon...

mainly use optimax inthe gtr no v power racing on the coast near me yet but have had the ultimate and no defference in both so far.... i have had caltex 98 in the sss and wasnt good but couldve been a bad batch.

just get some martini racing fuel 110ron hehehe

I only use Caltex Vortex or 91 (Not in a skyline, waiting till I am 21 now - just a ford falcon)

It is only about 7c more than 91 at my station, and nambour generally has the cheapest fuel in the sunshine coast (Normal Unleaded was 100.9c today compared to BP 104.9 AND I have to go out of my way to get to BP).

I put a tank of V power in today, I noticed smoother acceleration, cant say its got more power but I do like it, I'll let youz know what mileage is like when I fill up next.

It's funny that we still use the word mileage but kilometreage just dosnt sound right, does it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
    • A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
×
×
  • Create New...